Dgoatrider
New member
- Joined
- Aug 17, 2011
- Messages
- 23
- Tractor
- Kubota l3800hst
Ok I read a lot and get good info tonite I need advice and help not to panic. I just changed filters at 230 hours little late but had it in my head for 250. Did engine oil and filter and fuel and air no problems. I used shop vac to keep hst fluid in ( hope I remembered right no big mess so I'm happy). When I took off the larger suction filter I found a pile of shavings on the magnet some curly some straight I'm not a mechanic but changed a few filters over the years never saw this much stuff the other filter had nothing. Less than a 1/8of ring had stuff on it. Have not drained oil but think it will just go to shop if there is reason to be fearful. Don't need to be scared into going to shop but don't want to panic if this is ok. The shop did the last full service at 50.