dannyjkelly
New member
- Joined
- Dec 30, 2008
- Messages
- 17
I researched after the 4X4 won't engage, and thought I was into a major tear down.
Long story short:
The Front wheel drive shaft is held on to the transmission and front axle by a coupler.
There is a drift pin to keep the coupler from moving off either shaft.
The front drift pin fell out and the coupler slid all the way back to the transmission.
Once I FIND A Drift pin that fits, It's clean up time!
Long story short:
The Front wheel drive shaft is held on to the transmission and front axle by a coupler.
There is a drift pin to keep the coupler from moving off either shaft.
The front drift pin fell out and the coupler slid all the way back to the transmission.
Once I FIND A Drift pin that fits, It's clean up time!