Results 1 to 6 of 6
  1. #1
    New Member
    Join Date
    Aug 2009
    Posts
    10
    Location
    Wadsworth, OH
    Tractor
    Minneapolis-Moline 445, Case VAC, MM ZAU

    Default 2004 Morbark 13 Tornado Chipper

    2004 MORBARK Model 13 TORNADO CHIPPER with Auto Feed $18,000

    You are bidding on a 2004 low 600 hours Morbark 13 Chipper in very good condition.

    It runs excellent and has just had the Chipper Components gone over. The Fan Assembly, Chipper Shaft, both Pillow Blocks and Bearings, the 3 Shaft Locs, were just replaced. Drum Assembly has been checked out and New Knives installed. The chipper assembly is running very smooth. The Unit has been cleaned up and the paint touched up where needed.

    Specifications:

    Serial Number 23781
    Perkins 1004.4 125 HP Diesel Engine
    360 Degree Discharge
    Chipper Drum, New Fan, New Shaft ride on New B-LOC Bearings
    Electrical Plug-Ins and Tail and Marker Lights
    Lunet Ring 2 1/2" Pindle Hitch
    Attached Thumbnails Attached Thumbnails 2004 Morbark 13 Tornado Chipper-p8213937-jpg  

  2. #2
    New Member
    Join Date
    Aug 2009
    Posts
    10
    Location
    Wadsworth, OH
    Tractor
    Minneapolis-Moline 445, Case VAC, MM ZAU

    Default Re: 2004 Morbark 13 Tornado Chipper

    Asking $18,800

  3. #3
    New Member
    Join Date
    Sep 2012
    Posts
    1
    Location
    Black Hawk, Colorado
    Tractor
    deere

    Default Re: 2004 Morbark 13 Tornado Chipper

    Looking for very good condition chipper. Need to ship to Black Hawk, Colorado.
    Can you find shipper and load on truck? Did you purchase chipper new?
    Have you used chipper?
    Steve
    303-883-2003

  4. #4
    New Member
    Join Date
    May 2014
    Posts
    1
    Location
    Bellevue, NE
    Tractor
    none

    Default Re: 2004 Morbark 13 Tornado Chipper

    Quote Originally Posted by rwblessi View Post
    2004 MORBARK Model 13 TORNADO CHIPPER with Auto Feed $18,000

    You are bidding on a 2004 low 600 hours Morbark 13 Chipper in very good condition.

    It runs excellent and has just had the Chipper Components gone over. The Fan Assembly, Chipper Shaft, both Pillow Blocks and Bearings, the 3 Shaft Locs, were just replaced. Drum Assembly has been checked out and New Knives installed. The chipper assembly is running very smooth. The Unit has been cleaned up and the paint touched up where needed.

    Specifications:

    Serial Number 23781
    Perkins 1004.4 125 HP Diesel Engine
    360 Degree Discharge
    Chipper Drum, New Fan, New Shaft ride on New B-LOC Bearings
    Electrical Plug-Ins and Tail and Marker Lights
    Lunet Ring 2 1/2" Pindle Hitch
    __________________________________________________ ___________

    Is this still for sale, I am interested in it.

    Russell Ehrlich 402.850.7186

  5. #5
    New Member
    Join Date
    Aug 2009
    Posts
    10
    Location
    Wadsworth, OH
    Tractor
    Minneapolis-Moline 445, Case VAC, MM ZAU

    Default Re: 2004 Morbark 13 Tornado Chipper

    Sorry, long gone. Roland

    Quote Originally Posted by Russell Ehrlich View Post
    __________________________________________________ ___________

    Is this still for sale, I am interested in it.

    Russell Ehrlich 402.850.7186

  6. #6
    New Member
    Join Date
    Aug 2009
    Posts
    10
    Location
    Wadsworth, OH
    Tractor
    Minneapolis-Moline 445, Case VAC, MM ZAU

    Default Re: 2004 Morbark 13 Tornado Chipper

    Sorry, long gone.

    I have not check in for a while obviously.

    Hope you have found one.
    Roland

Similar Threads

  1. Chipper Help Please! I Need to buy a Chipper
    By Doug_Norman in forum Attachments
    Replies: 11
    Last Post: 03-20-2006, 09:52 PM
  2. Colorado Man Killed In Large Wood Chipper
    By rich_ncal in forum Safety
    Replies: 52
    Last Post: 01-14-2006, 05:56 PM
  3. Chipper Bearcat 70554 PTO Chipper
    By LAGEORGE in forum Attachments
    Replies: 5
    Last Post: 08-17-2004, 07:13 PM
  4. Valby chipper
    By GlennT in forum Ag Tractors & Machinery
    Replies: 11
    Last Post: 11-21-2000, 12:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.