Go Back   TractorByNet.com > General Forums > Projects
Show Recent Threads:
24 Hours
Since My Last Visit

Reply
 
Thread Tools Display Modes
Old 08-21-2009, 11:50 PM   #1 (permalink)
Platinum Member
 
Join Date: Apr 2005
Location: nicholson, pa
Posts: 522
Default Projects that are done!

Hi all we were busy they year and would like to share what we finished.
We needed a new bridge to cross a sometimes creek. sometimes it rains and when it does sometimes it runs.

These are the connectors they are pallet shims i picked up off ebay.


The bridge will have a roof put on it next year. The decking is hemlock to give us some traction in the winter. Its 6' wide by 20' long.


Next the green house was finished. I start a lot of the seeds inside and only needed a place to harden off my plants. I also wanted to be able to store the lawn tractor there in the winter time.




also cut a lot of firewood, all beech the round stack holds about 2 1/2 cords is 7' high and will shrink to 5'8


next we poured a pad, installed the roof, and laid the blocks for a bbq and a bread oven.
the bread oven will be done next year.


field stone was then placed over the blocks



we also had time to build a sandbox and make some doors for our little one.



the final project was to finish my homebrewing stand. This has electronicly controlled temp sensors, pumps to move the beer, and i can make 10 gallons at a time.

I am trying to finish two other projects before next week. I made kitchen doors and need to sand and stain them and will be landscaping around the bbq.

Enjoy
Forgeblast
forgeblast is offline   Reply With Quote
Old 08-22-2009, 07:36 AM   #2 (permalink)
Platinum Member
 
lhfarm's Avatar
 
Join Date: May 2002
Location: Central Indiana
Posts: 558
Default Re: Projects that are done!

Do you have time to drink any of the beer? Very impressive collection. I have a bread/pizza oven in my to-do book (past the list stage years ago). I'd like to see more pictures of your BBQ and oven base.

Thanks for sharing.
__________________
Barry
Lawson Hill Farm
NH TC40DA
'64 IH Cub Lo-Boy
'47 Willys Jeep CJ2a w/ PTO
'49 Willys Jeep CJ3a w/ PTO & 3pt lift
http://www.farmjeep.com/
lhfarm is offline   Reply With Quote
Old 08-22-2009, 04:15 PM   #3 (permalink)
Super Member
 
Thomas's Avatar
 
Join Date: Apr 2000
Location: Lebanon,NH.
Posts: 8,220
Default Re: Projects that are done!

Sure hope that was end of list and now your getting R&R...nice.
__________________
Thomas..NH
Thomas is offline   Reply With Quote
Old 08-22-2009, 06:27 PM   #4 (permalink)
Platinum Member
 
Join Date: Apr 2005
Location: nicholson, pa
Posts: 522
Default Re: Projects that are done!

Well, I teach so I am going back to work this week. I enjoy being outside and I was able to put my 10mt old in our baby backpack and do a lot of the work. Although my wife said that the to do list for next summer is going to be much much smaller. (finish the shed, and maby the bbq, and cut firewood).
Ill run and go and get some pics tommorrow, but the base is 6' of 2b gravel compacted with draintile in it with a 4'' poured concrete base that has rebar in it i had left over styrofoam insulation and that is directly under the concrete. I also have the property sloped away from the oven and some drain tile guiding any water away from the base.
The oven will be 32 w x 36 l and the bbq is 32 w by 4 l. I basically used the metal i had as a guide for the bbq, and the base of the bread oven came from the Brick Oven Plans | Build an Italian Brick Oven site.
you can get free downloads that show you how to make the entire oven for free!
All the block is dry stacked and then filled with concrete and rebar.
forgeblast is offline   Reply With Quote
Old 08-22-2009, 11:22 PM   #5 (permalink)
Gold Member
 
Join Date: Jan 2008
Location: mountain valley near Tahoe
Posts: 480
Default Re: Projects that are done!

I really like your bridge. We'ed love to have a creek, even a sometimes creek.
valley is offline   Reply With Quote
Old 08-23-2009, 09:14 AM   #6 (permalink)
Super Star Member
 
jinman's Avatar
 
Join Date: Feb 2001
Location: Texas - Wise County - Sunset
Posts: 10,912
Default Re: Projects that are done!

I love all your projects and your using what you have to build with. Using those turkey fryer pots to make beer is a great idea. I admit to being lazy and loving my propane grill, but in the winter an open pit grill would be ideal to cook and keep warm. Sitting around the grill/campfire would make lots of pleasant evenings. You can go back to school knowing that you've sure had some productive time over the summer.

BTW: I'm having a really hard time seeing the dimensions you mentioned for your bridge. My eyes want to believe that bridge is 4' wide instead of 6' wide. I don't know if it is an optical illusion, but those boards look 6" wide and 8 of them side-by-side would be 4' instead of 6'. It doesn't really matter because it looks very nice and strong.
__________________
Jim

jinman is online now   Reply With Quote
Old 08-23-2009, 10:48 AM   #7 (permalink)
Platinum Member
 
Join Date: Apr 2005
Location: nicholson, pa
Posts: 522
Default Re: Projects that are done!

From the angle they look off but its 8'' rough cut hemlock, plus the uprights being 4x4's make it look a bit smaller. I made it 6' just incase i ever need to get my truck up to the back part of out property.
Tommorrow i am having ten ton of #1 stone delivered and it will be used to cover the ground around the bbq and firepit, after i put down landscapers fabric.
forgeblast is offline   Reply With Quote
Old 08-23-2009, 04:26 PM   #8 (permalink)
Platinum Member
 
Join Date: Apr 2005
Location: nicholson, pa
Posts: 522
Default Re: Projects that are done!

Here are some pictures of the floor, this shows the breadoven (left) and bbq floor (right). the bbq floor has field stone that was put into cement. I did this so that it would slope away from the base of the block. I also did it because we have a fire pit and i wont be throwing logs in the bbq, it will be strickly for cooking. I also forgot that I made the picknick table and landscaped where it is, basically sloped the property, put landscape fabric down, #1 stone on that and built a low step to connect it to the bbq/firering. A stone wall goes all around it. Being in PA anyhole we dig we find tons of stone. Any time i put a fence post in i have to take my jackhammer bits and smash through stone.

Here is the grove, being preped for the stone coming tommorrow.the two trees close in the picture are perfect for a hammock.

This shows the step and our fire pit and bbq

This shows the back corner that has a faucet on it for any cleaning.

Here is a picture of the floor doesnt look too great there but once i cast the pad that the bread oven will sit on i will go in and put field stone all ove it too.

forgeblast is offline   Reply With Quote
Old 11-19-2009, 10:16 PM   #9 (permalink)
Gold Member
 
Join Date: Jan 2008
Location: mountain valley near Tahoe
Posts: 480
Default Re: Projects that are done!

Some great stuff! I Partitularly like that bridge. I wouldn't mind one of thoes ovens. I'd like to know how they do with bread. Oh! and the pond, like to do one here, would have to be smallish like a swiming pool.
Great to see what you guys are doing!
valley is offline   Reply With Quote
Old 11-20-2009, 08:13 PM   #10 (permalink)
Platinum Member
 
Join Date: Apr 2005
Location: nicholson, pa
Posts: 522
Default Re: Projects that are done!

Last major thing for this year was redoing the kitchen doors. The where the white formica coated doors.
Well 2 years ago sears had a sale on routers and tables, 70 for both. I then got the bits through rockler when ever they would have a sale. I also got the ratchet clamps from hf for 4.99, the hardest part was finding the stain. I had almost all the boards done when i ran out it took a month of caling around to find it again.

before


The wood is poplar it took the stain so nice.



the last thing to do is the countertop, sink, and backsplash.
forgeblast is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off
Forum Jump


All times are GMT -4. The time now is 02:15 PM.


Page generated in 0.10487 seconds with 8 queries