Results 1 to 3 of 3
01-18-2011, 04:40 PM #1
Building a pole barn/tractor shed
I am looking for some ideas on building a pole barn/shed for my equipment. Nothing too fancy...most likely a gravel floor and apron and if i get ambitious, i might add a workshop on the end. Anyone built anything similar?
01-18-2011, 04:46 PM #2
Re: Building a pole barn/tractor shed
Pleanty of members here have built pole barns. Do a search and you can spend hours reading and looking at pictures.
Best advice I can offer you is to build it as big as you possiblty can.
And once you do a search and read a lot, post back if you have any specific questions.".........there is only one way to find out."
"Ok, hold my beer and watch this.........."
NEW PROJECT: IH 300 Utility (any tips, parts sources, and words of wisdom are welcome)
Ford 5500 Backhoe
Kubota L3400GST W/LA463 FEL
2005 Dodge 3500 4x4 Diesel
8N Rebuilt and restored
3 Homemade wood hauling trailers
Dolmar 6400 84cc ported
Sachs-Dolmar 120SI Ported
(4) Sachs-Dolmar 116SI Ported
01-18-2011, 09:27 PM #3
- Join Date
- Mar 2002
- Central florida
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
By paulinkansas in forum Build-It YourselfReplies: 14Last Post: 04-28-2010, 01:34 AM
By BryanM in forum ProjectsReplies: 12Last Post: 06-20-2007, 08:47 PM
By mopower440 in forum ProjectsReplies: 87Last Post: 02-07-2004, 06:17 PM
By mopower440 in forum ProjectsReplies: 134Last Post: 01-14-2004, 01:45 AM
By s1120 in forum Rural LivingReplies: 68Last Post: 02-18-2001, 08:44 AM