Joe Dirt
New member
- Joined
- Apr 10, 2011
- Messages
- 23
- Tractor
- John Deere, Belarus, LS3010
had some things that I wanted to move and build in the future and I built this to help me work easier, built this out of things that I had laying around the shop, its 2 3/8" oil filed tubing, stinger is six foot long, the flat strap is 1/2"X 3 1/2" with 25 holes 3/4" Dia. on 3" centers, I will use a clevis in these holes, I welded a hook on the end and two near the tractor for heavy load, that is 3"X3"x1/2" angle iron on each side, I was going to cut the excess of then decided to add the shoes on the bottom, make is easy to latch and unlatch, it will lift 12 foot, this works much better that the boom on the rear of the tractor, can see better and can tilt it, hope U enjoy, Joe Dirt