My Place: a CAT, Mahindra, and Ducks

[bindian]

Brandi, I saw that Texas State Rifle Association sticker on the tool box too!

Haven't seen one that big in a long time.

I have another one laying on my dresser. Send me a PM with address and I will snail mail it to you.
hugs, Brandi

 

[bindian]

Here are my other tin signs. I will put them in rouch cut hickory frames.
They will be on a wall in a house like this...
hugs, Brandi

 

[Wagtail]

We will get a winter blast here next week. Goodbye 90 degree or higher days for a hand full of days.

How many hay cuttings do Y'all get in a good year?
hugs, Brandi

Typically only one cutting, late November to late December. There's usually not enough time for a second cut so those paddocks are used for grazing until they're prep'd for the next crop.

Wallabies & pademelons take their 'share' of the yield too... mind you, wallaby is good eating.

 

[two_bit_score]

Typically only one cutting, late November to late December. There's usually not enough time for a second cut so those paddocks are used for grazing until they're prep'd for the next crop.

Wallabies & pademelons take their 'share' of the yield too... mind you, wallaby is good eating.

Do they taste like chicken?

 

[MagicMM]

Brandi, I'm sorry that I was working (sawing) and missed your party, but I want to add my Congratulations. Retirement may not be and easy job but at least you are punching your own clock. MM

 

[bindian]

Typically only one cutting, late November to late December. There's usually not enough time for a second cut so those paddocks are used for grazing until they're prep'd for the next crop.

Wallabies & pademelons take their 'share' of the yield too... mind you, wallaby is good eating.

Oh wow. One cutting isn't good at all here.
hugs, Brandi

 

[bindian]

Brandi, I'm sorry that I was working (sawing) and missed your party, but I want to add my Congratulations. Retirement may not be and easy job but at least you are punching your own clock. MM

Thanks MMM. I am trying to reorganize my work tool boxes with my home tool box. Lots of emotion there, as my dog box had photos of the kids (when way younger) taped into the lids. That box is stored above my shop now. Just too many years of experience working out of these boxes. Seems every little thing in them, which I may never used again, bring back floods of memories.
hugs, Brandi

 

[bindian]

Brandi, I'm sorry that I was working (sawing) and missed your party, but I want to add my Congratulations. Retirement may not be and easy job but at least you are punching your own clock. MM

Thanks MMM. I am trying to reorganize my work tool boxes with my home tool box. Lots of emotion there, as my dog box had photos of the kids (when way younger) taped into the lids. That box is stored above my shop now. Just too many years of experience working out of these boxes. Seems every little thing in them, which I may never used again, bring back floods of memories.
hugs, Brandi

 

[bindian]

MMM,
I'm having difficulty getting onto the Forestry Forum. Can you get on? It says service unavailable.
hugs, Brandi

 

[bindian]

Do they taste like chicken?

Good question. Or rabbit?
hugs, Brandi

 

[bindian]

My Mahindra is down. After 13 years of carrying heavy weight on the loader, the front R1s just flexed too much. On July 29th, this year, I had a tube put into the right front tire. The sidewalls had just too many cracks from flexing under those heavy loads. One crack finally blew out. I had a tube put in and it lasted until today. A little over a month. Wish I had went ahead then and bit the bullet and bought two new tires. They are 6 ply, but I think I can get the same size in 8 ply. Tuesday we will know.
Sadness Prevails.
hugs, Brandi

 

[Wagtail]

Do they taste like chicken?

It's a VERY lean dark red meat... perhaps venison would be closest.

Typically cooked in strips. It may be in your supermarkets as "Kangaroo", which, generically, a wallaby is.

So is a pademelon, but they're too little to do anything with.

 

[two_bit_score]

It's a VERY lean dark red meat... perhaps venison would be closest.

Typically cooked in strips. It may be in your supermarkets as "Kangaroo", which, generically, a wallaby is.

So is a pademelon, but they're too little to do anything with.

Their front legs look like they would be like chicken wings.

 

[MagicMM]

I talked to Jeff early this morning. The FF was down last night, OK now.

 

[MagicMM]

I replaced my fronts with 8 ply. You will be good with them.

 

[bindian]

I talked to Jeff early this morning. The FF was down last night, OK now.

Thanks.
hugs, Brandi:thumbsup:

 

[Kyle_in_Tex]

..........the barbers sons have no haircuts.:laughing: No 3 phase service sucks.:thumbdown: It's expensive to get. Maybe I need to store your lathe for you. Yeah...........that's the ticket.:drink:
I have been known to machine my own parts, but did that mostly in the hangar when the plane was finished and I didn't feel like sleeping. Slow with hand tools, but doable.:dance1: Like in post #1 here....... https://www.tractorbynet.com/forums/build-yourself/229883-hydraulic-auger-mount.html?highlight=
hugs, Brandi

Watch craigslist for a used rotary phase converter. You won't get true horsepower out of your motor (unless you get a really good one) but it will be close. I used to run a couple of big CNC machines off of one as well as the rest of my home shop. 3 phase is so much nicer for motors - no more starting and run caps that always go out at the worst times.

Dang it MickeyDBC. I offered to store it for him.:thumbsup: Now he won't let me store it for him.
:laughing::laughing::laughing:
hugs, Brandi

It was a kind offer, but I like to keep it here for future use.

My Mahindra is down. After 13 years of carrying heavy weight on the loader, the front R1s just flexed too much. On July 29th, this year, I had a tube put into the right front tire. The sidewalls had just too many cracks from flexing under those heavy loads. One crack finally blew out. I had a tube put in and it lasted until today. A little over a month. Wish I had went ahead then and bit the bullet and bought two new tires. They are 6 ply, but I think I can get the same size in 8 ply. Tuesday we will know.
Sadness Prevails.
hugs, Brandi

sorry 'bout that. Our tractor's front tires are long in the tooth.

 

[bindian]

It was a kind offer, but I like to keep it here for future use.
.

:laughing::laughing::laughing::thumbsup:
hugs, Brandi

 

[bcp]

Now that you have your tools at home, all the neighbors will be bringing their aircraft by for you to work on.



Bruce

 

[bindian]

Now that you have your tools at home, all the neighbors will be bringing their aircraft by for you to work on.



Bruce

True...........I need to hang a sign that says.................Floatplanes and Amphibians only.:thumbsup::licking::laughing::dance1:
hugs, Brandi