i kinda doubt the OP has the funds for geo textile fabrics too...
Printable View
i kinda doubt the OP has the funds for geo textile fabrics too...
Realize their is a huge difference in nonwoven geotextile fabrics that look like heavy felt and the structural fabric that looks like a snow fence (Tensar). They also perform completely different tasks. A nonwoven fabric adds zero stability to a road but will keep the granular material separated from the subgrade (mud).
Nice to hear an update. I have an area that's muddy, not really a swamp. I've been reading up on ideas so I can make a trail so I can get a tractor across it to skid logs. Over the last few years I've been putting rocks the size of a microwave into the ruts to fill them in. It's not too long, maybe 100 feet. The rocks have held up nicely to ATV traffic but they are too slippery for the tractor. I thought about putting down rough cut Hemlock and burying that but while I have lots of Hemlock I don't have a cheap quick way to turn logs into boards. After rereading this I'm thinking that maybe a grid of tires over the rocks filled with hard pan might work well. I'm sure I could get as many free used tires as I want and bolting them together shouldn't be too bad. Plus the tires would raise the trail up about 6" above everything else and help keep it dry.
Local DOT used shredded tires as a base for a swampy area. It worked, but it started to pollute the area. Generally people make corduroy roads in low lying swampy areas, logs side by side and across the roadway, and on top of that add gravel. Overtime, they just add more to the surface as it slowly sinks in.
Attachment 304036
(nice site)
Thoughts from the Woods: Corduroy Road Update
Attachment 304037Attachment 304038Attachment 304039