DaveNH
Gold Member
Does any one have any experience with Northern Tool and Equipment's power tools? In a recent catalog they have a 1" Rotary hammer for $129. If you recall I was going to do some granite slabbing and asked who made a good hammer drill. That is what I thought I could get away with but was strongly advised to get or rent a rotary hammer. I rented one for $56 for a full day and only got about 1/10 of the holes I needed drilled. I saw this tool advertised and figured ......
For $129, that about what I'd be into the project if rented the tool again.
Catalog says it will accept SDS bit, 0-800 RPM, 2800 BPM
Catalog Number 143384
Thanks
We're all in this together! (3)
For $129, that about what I'd be into the project if rented the tool again.
Catalog says it will accept SDS bit, 0-800 RPM, 2800 BPM
Catalog Number 143384
Thanks
We're all in this together! (3)