Results 1 to 3 of 3
-
04-09-2000, 12:34 AM #1
- Join Date
- Apr 2000
- Posts
- 26
- Location
- SW Va.
- Tractor
- Kubota B7100 w/lots of attachments
Troy Built Horse Tiller
I had a leak in the tiller housing (the gear box that transfers tha power from the transmission to the shafts that hold the tines). The manual gave good instructions on troubleshooting and fixing the leak, which I did. There was obviously gear oil in the case, but I don't see a filler port. Anyone know if this case gets its' lubrication from the transmission gearbox? The manual is unclear.
Chris in SW Va.
-
04-09-2000, 02:14 PM #2New Member
- Join Date
- Sep 2005
- Posts
- 0
Re: Troy Built Horse Tiller
Chris on my 8hp Horse tiller the filler plug is on the top front of the case between the 2 shield mounting bolts. Chris
-
04-09-2000, 09:05 PM #3
- Join Date
- Apr 2000
- Posts
- 26
- Location
- SW Va.
- Tractor
- Kubota B7100 w/lots of attachments
Re: Troy Built Horse Tiller
Chris: Thanks, I will look there. I didn't see any reference to it in the manual.
Chris in SW Va
Reply With Quote
