|
|
|
|
|
|||||||||||||||
|
|
|||||||||||||||
|
|
#1 (permalink) |
|
Super Star Member
Join Date: Aug 2001
Location: South Bend, Indiana (near)
Posts: 12,336
|
Here is a link to the tractor rollover demo pictures and videos that we keep talking about in many forums here on TBN. There are five pages of information there, many pictures and videos. Please read them all, look at the pictures and watch the videos. I'll make this a sticky post for now so that it stays at the top of the Safety Forum for a while.
![]() Tractor Overturn, H.J. Sommer III |
|
|
|
|
|
#3 (permalink) |
|
Platinum Member
Join Date: Feb 2008
Location: Orstraya , mate .
Posts: 733
|
Never drive across a slope with the nose pointed down hill , NEVER . As the front axle pivots in the centre it is like having a tractor with one front wheel in the middle . The weight is transfered to the low front corner and is taken away from the high side rear wheel . The front axle offers no resistance at all until the axle hits the stops by which time its all over . Thats why i mow steep embankments with the nose steering up hill , the rear axle being rigid stabilizes the tractor .
|
|
|
|
|
|
#5 (permalink) |
|
Platinum Member
Join Date: Feb 2008
Location: Orstraya , mate .
Posts: 733
|
Im talking about mowing levy banks lengthways , not up and down . When i say never drive across a slope with the nose pointing down hill i mean if you have too . Drive with the nose elevated a minnimum 5 degrees + from horizontal which utilizes the rigidity of the chassis and rear axle for stability . If you come down to 0 degrees (horizontal) you start to loose this effect . If you go further below horizontal to say 5 degrees- you will do as i said before and roll the tractor .
|
|
|
|
|
|
#7 (permalink) |
|
Platinum Member
Join Date: Jun 2005
Location: Ohio
Posts: 893
|
Pretty scary stuff. After I installed a tilt meter I confirmed that my own sense of impending doom mirrored the meter. At 15 degrees I get that feeling. Once I mowed a few times with the meter I have the spots identified where I am particularly careful. Looking at the posted rollover site really drives the point home.
Thanks, John
__________________
Farmtrac 270 DTC |
|
|
|
|
|
#8 (permalink) |
|
Silver Member
Join Date: Mar 2008
Location: Enfiled, NH
Posts: 177
|
Nice video but I noticed everytime the tractor flipped they were turning the wheels up hill. Thats definatly going to cause an unstable condition. I suspect the tractor would have traversed the slope had they not turned the wheels up hill. Don't get me wrong I am not bashing the video just making an observation.
__________________
Kubota BX24 Enfield, NH |
|
|
|
|
|
#9 (permalink) | |
|
Gold Member
Join Date: Nov 2007
Location: Sands Township, Marquette Co, Michigan
Posts: 326
|
Quote:
|
|
|
|
|
|
|
#10 (permalink) | |
|
Silver Member
Join Date: Mar 2008
Location: Enfiled, NH
Posts: 177
|
Quote:
![]()
__________________
Kubota BX24 Enfield, NH |
|
|
|
|
![]() |
||
| Thread Tools | |
| Display Modes | |
|
|
|
||||||||||||||||||||||
| About TractorByNet.com | Terms of Service | Advertise | © 2008 TractorByNet.com |