NEW DUAL AXIS SLOPE INDICATOR

RBManufacturing · 05-23-2003, 10:48 AM

Ooops. Sorry - the picture didn't post. Here ya go!

Thanks
Rick [img]/forums/images/graemlins/blush.gif[/img]

MJones · 05-23-2003, 10:50 AM

I would be more than happy to test one and offer feedback.

Thanks!,

Mike

MikePA · 05-23-2003, 10:53 AM

Rick, I will test one!!!!

RobS · 05-23-2003, 10:55 AM

Hurry up with that testing Rick, I'm ready to BUY one! Looks very slick [img]/forums/images/graemlins/smile.gif[/img]

markie61 · 05-23-2003, 10:57 AM

I replied under your first post attempt and sent a PM. I have LOTS of hills and would be very happy to test and provide feedback. I am averaging about 25 hours a month and the only level areas on my property are the floors in my house!
Thanks for your consideration!
Mark

dourobob · 05-23-2003, 11:08 AM

Hello Rick
As I have already indicated I am interested in testing a unit.

I have three tractors at present. Will the mounting bracket be easily moved from one to another or would I require two or three mounting brackets?

Thanks.

Bob

RBManufacturing · 05-23-2003, 11:22 AM

HI GUYS,
I HAD TWO INQUIRIES WITHIN 5 MINUTES OF POST. I CAN
PROBABLY COME UP WITH A FEW MORE TO TEST. MY TESTS
HERE ON MY TRACTOR HAVE ALL BEEN GOOD. INDICATOR
POINTER MOVES DURING ACCELERATION, BUT NOT TOO
BAD DURING OPERATION. I CAN MAKE ONE THAT
COMPENSATES FOR ALL CONDITIONS, BUT PRICE WOULD
NOT BE ATTRACTIVE. TRIED TO MAKE ONE THAT WORKS
WELL, BUT NOT TOO EXPENSIVE. ONLY ONE MOVING
PART, AND WEATHER, ETC. HAS NO EFFECT ON INDICATOR.
HAVE NOT SET EXACT PRICE, BUT WILL BE VERY REASONABLE. PLEASE E-MAIL ADDRESSES TO ME FOR
SHIPPING TEST MODELS. RandBMfgInc@worldnet.att.net
I will only have a few to send for testing. first come first served. Mounting uses same bracket. New one attaches to
side of existing models using double sided adhesive. Thanks, Rick

Mike_Dumond · 05-24-2003, 09:45 AM

Cool, just what the doctor, (or paramedic) ordered. [img]/forums/images/graemlins/smile.gif[/img]

RBManufacturing · 05-26-2003, 09:57 AM

Hi Guys,
WOW, I have had 17 requests for test units so far. Problem is,
I only have 5-6 units available for testing. When we made the
mold for the parts, they were not kicking out of mold very
well. Lost alot of parts. Was only able to salvage a few good
ones. I will be adding more kick out pins to the mold next day
or two. Will not effect the models looks or operation. Will only
allow more parts with less loss. I have 10 more from a
previous run, being tested on construction equipment at a
large construction company. Also, I have one on an off-road
truck being tested. Should have a limited supply available
late this week for sale. All testing is very important to us.
What may affect a model on a truck, may not affect a model
on a tractor. All tests so far have been positive results.
To make fair, I will be sending out test models to the first
ones that asked. Sorry guys. Thanks, Rick

Chief · 05-27-2003, 01:54 AM

I think I am getting to the party late but if you need more testers; I would love to test the indicator on my 4410. [img]/forums/images/graemlins/smile.gif[/img]

05-23-2003, 10:50 AM	#2 (permalink)
MJones Join Date: Dec 2001 Location: SW Virginia Posts: 22	Re: NEW DUAL AXIS SLOPE INDICATOR I would be more than happy to test one and offer feedback. Thanks!, Mike

05-23-2003, 10:53 AM	#3 (permalink)
MikePA Super Member Join Date: Apr 2001 Posts: 9,368	Re: NEW DUAL AXIS SLOPE INDICATOR Rick, I will test one!!!!

05-23-2003, 10:55 AM	#4 (permalink)
RobS Super Member Join Date: Jun 2000 Location: SW Michigan Posts: 5,296	Re: NEW DUAL AXIS SLOPE INDICATOR Hurry up with that testing Rick, I'm ready to BUY one! Looks very slick [img]/forums/images/graemlins/smile.gif[/img]

05-23-2003, 10:57 AM	#5 (permalink)
markie61 Join Date: Mar 2001 Location: Northern Virginia Posts: 1,211	Re: NEW DUAL AXIS SLOPE INDICATOR I replied under your first post attempt and sent a PM. I have LOTS of hills and would be very happy to test and provide feedback. I am averaging about 25 hours a month and the only level areas on my property are the floors in my house! Thanks for your consideration! Mark

05-23-2003, 11:08 AM	#6 (permalink)
dourobob Gold Member Join Date: Mar 2002 Location: Douro, Ontario, Canada Posts: 401	Re: NEW DUAL AXIS SLOPE INDICATOR Hello Rick As I have already indicated I am interested in testing a unit. I have three tractors at present. Will the mounting bracket be easily moved from one to another or would I require two or three mounting brackets? Thanks. Bob

05-23-2003, 11:22 AM	#7 (permalink)
RBManufacturing Join Date: Oct 2000 Location: Riverside, MIssouri Posts: 281	Re: NEW DUAL AXIS SLOPE INDICATOR HI GUYS, I HAD TWO INQUIRIES WITHIN 5 MINUTES OF POST. I CAN PROBABLY COME UP WITH A FEW MORE TO TEST. MY TESTS HERE ON MY TRACTOR HAVE ALL BEEN GOOD. INDICATOR POINTER MOVES DURING ACCELERATION, BUT NOT TOO BAD DURING OPERATION. I CAN MAKE ONE THAT COMPENSATES FOR ALL CONDITIONS, BUT PRICE WOULD NOT BE ATTRACTIVE. TRIED TO MAKE ONE THAT WORKS WELL, BUT NOT TOO EXPENSIVE. ONLY ONE MOVING PART, AND WEATHER, ETC. HAS NO EFFECT ON INDICATOR. HAVE NOT SET EXACT PRICE, BUT WILL BE VERY REASONABLE. PLEASE E-MAIL ADDRESSES TO ME FOR SHIPPING TEST MODELS. RandBMfgInc@worldnet.att.net I will only have a few to send for testing. first come first served. Mounting uses same bracket. New one attaches to side of existing models using double sided adhesive. Thanks, Rick

05-24-2003, 09:45 AM	#8 (permalink)
Mike_Dumond Join Date: Jul 2001 Location: Fort Kent, Maine Posts: 477	Re: NEW DUAL AXIS SLOPE INDICATOR Cool, just what the doctor, (or paramedic) ordered. [img]/forums/images/graemlins/smile.gif[/img]

05-26-2003, 09:57 AM	#9 (permalink)
RBManufacturing Join Date: Oct 2000 Location: Riverside, MIssouri Posts: 281	Re: NEW DUAL AXIS SLOPE INDICATOR Hi Guys, WOW, I have had 17 requests for test units so far. Problem is, I only have 5-6 units available for testing. When we made the mold for the parts, they were not kicking out of mold very well. Lost alot of parts. Was only able to salvage a few good ones. I will be adding more kick out pins to the mold next day or two. Will not effect the models looks or operation. Will only allow more parts with less loss. I have 10 more from a previous run, being tested on construction equipment at a large construction company. Also, I have one on an off-road truck being tested. Should have a limited supply available late this week for sale. All testing is very important to us. What may affect a model on a truck, may not affect a model on a tractor. All tests so far have been positive results. To make fair, I will be sending out test models to the first ones that asked. Sorry guys. Thanks, Rick

05-27-2003, 01:54 AM	#10 (permalink)
Chief Gold Member Join Date: Oct 2002 Location: Middle Tennessee Posts: 317	Re: NEW DUAL AXIS SLOPE INDICATOR I think I am getting to the party late but if you need more testers; I would love to test the indicator on my 4410. [img]/forums/images/graemlins/smile.gif[/img]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode