Search:

Type: Posts; User: carmedic310; Keyword(s):

Results 1 to 100 of 160
Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    5
    Views
    1,170

    Re: Tire ballast.

    38.4 gallons per tire and will add 410lbs per tire
  2. Replies
    40
    Views
    4,061

    Re: Temp gauge question.

    oops didnt realize this was a new tractor
  3. Replies
    52
    Views
    7,710

    Re: Brush Grapple Preferred Width?

    My bucket is also 72.I tried a 72 in grapple on mine I thought it felt a little heavy once loaded so I ended up buying a 60inch works great
  4. Replies
    40
    Views
    4,061

    Re: Temp gauge question.

    Most dealers will not answer any questions they will just tell you to bring it in.Your other option is to find a place to put a new gauge in with a mechanical type sending unit instead of...
  5. Replies
    38
    Views
    4,140

    Re: 3 ponit hitch will not operate

    had that happen on a mahindra I had .Turned out to be the knob under the front of the seat.kids were playing around the tractor and must have turned it
  6. Replies
    15
    Views
    1,907

    Re: lift arms too short?

    I had the same problem with a ford 800 when I put the ford finish mower on.(you would think ford made them both so they should fit)I ended up removing the hitch pins from the finish mower and welding...
  7. Replies
    40
    Views
    4,061

    Re: Temp gauge question.

    Usually the temp sending unit for the gauge is not the same coolant temp sensor for the ecm Most have 2 different sensors not sure on your model
  8. Re: Need to override L3400 seat safety switch circuit

    If its a 2 wire switch all you have to do is jump the 2 wires together to make the circuit
  9. Replies
    63
    Views
    6,318

    Re: What to look for in a compound miter saw?

    I bought the ridgid 12" compound miter saw with stand about 12 years ago.I love it.Their lifetime warrantee is awesome and they do stand behind it no problem.Usually they have a promotion to get the...
  10. Replies
    63
    Views
    8,012

    Re: Replacing Gc1700 series rear lights

    4X Red Waterproof Brake Stop Turn ID Light Bar Trailer Truck Multifunction | eBay These would be great on your rops.I used a set on the guide post on my boat trailer work awesome
  11. Replies
    18
    Views
    2,378

    Re: New MIG welder

    I see tractor supply has a Hobart 210 mig welder for 899.00
  12. Replies
    63
    Views
    8,012

    Re: Replacing Gc1700 series rear lights

    You could mount one of these on top of your rops 2inch 12W Combo LED Work Light Bar Offroad Driving Lamp SUV Car Boat 4WD Truck | eBay
  13. Replies
    13
    Views
    2,795

    Re: Drilling a small hole thru backhoe boom?

    I would weld some bolts to the arm rather than drill
  14. Replies
    2
    Views
    643

    Tiller Re: Tiller make model

    Looks like the ones from Tractor supply.Think they are made by King kutter
  15. Replies
    27
    Views
    3,545

    Re: Socket Organizer

    Pittsburgh 68100 3 Piece SAE Socket Tray/Organizer
    3 Pc SAE Socket Tray/Organizer

    Rated #1 in performance
    Truckin' Magazine
    Pittsburgh - Item#68100

    Read 57 ReviewsWrite A Review
    Organize...
  16. Re: Tiller Slip Clutch: is it working to protect my L2501?

    If something gets caught in the tines and actually stops them the slip clutch will smoke.Shut PTO off as soon as you can.Smoking slip clutch means you are overheating the friction material.If You hit...
  17. Replies
    12
    Views
    1,783

    Re: What do you use to ... ?

    I have used silicone rtv to do things like this.Works great and if you need to take it back off no problem
  18. Replies
    80
    Views
    9,619

    Re: Full synthetic

    My TYM has the kubota engine in it I changed over to full synthetic at 60 hours.I use Rotella synthetic in all my diesels
  19. Replies
    21
    Views
    3,739

    Re: How to move a 2-ton block of concrete?

    I have a medium duty International 4700 car carrier its rated for 9000lbs I have hauled 5 of these at a time before @2000 lbs each
  20. Replies
    137
    Views
    13,410

    Re: How much rust can under-body spray stop?

    To answer the question there is nothing you can do to actually stop rust on a used vehicle.You can slow it down.Years ago rusty jones and ziebart offered undercoating guarantee's neither one is still...
  21. Replies
    11
    Views
    1,764

    Re: PTO adapter sliding off

    OOps my bad didn't realize this adapter was going on a smooth non splined shaft.I would put the adapter on your gearbox. Take the set screw out of the adapter,find a center punch that will fit in the...
  22. Replies
    11
    Views
    1,764

    Re: PTO adapter sliding off

    You should have an adapter with the Quick release.Looks like your adapter has the hole for the roll pin type retainer which would work also.If there is nothing to lock the adapter to your PTO shaft...
  23. Thread: Bolt size

    by carmedic310
    Replies
    3
    Views
    642

    Re: Bolt size

    Why can't you just order these bolts from Ford im sure they can look up the manifold bolts.I haven't heard of a M5.5 but I do know the most common pitch are 1.00,1.25 and 1.50.You should also be able...
  24. Replies
    112
    Views
    19,791

    Re: Bye, Bye Branson???

    TYM also uses Kubota,and Cat engines as well
  25. Replies
    8
    Views
    1,017

    Chipper Re: Jinma 6" pto chipper, seized bolts

    Remember to coat the new bolts with never sieze before replacing them
  26. Replies
    5
    Views
    814

    Re: Can't get flywheel off Deere L118

    I haven,t seen a flywheel yet I couldn't get off with someones help to hold 2 pry bars under the flywheel with some pressure and striking the top of the crankshaft. key is not too excessive force on...
  27. Replies
    15
    Views
    2,246

    Re: Welding broken cast iron coat rack.

    Fusor made by the lord company would work.You can get it at any parts store that carries body shop supplies.They have used this stuff to actually glue water tanks to concrete mixer trucks.They used...
  28. Re: Can't remove PTO shaft from auger's gear shaft

    I would not use heat it will damage your gearbox seal.I agree with some here that say chain to a tree.I would use a come along hooked to the tractor apply pressure and hit coupler with a hammer to...
  29. Replies
    17
    Views
    2,764

    Re: bent hydraulic lines

    I would never put heat to a steel line with anything in it.i also agree with oldnslo that you should be able to bend the line by hand you dont actually want to bend it as much as you do twist it at...
  30. Re: Ordered a Pat痴 Easy Change Hitch System for my 861D Ford

    I have had pats easy change on my tractor 3 years now and love it.I also ordered the alighnment bar but very seldom use it.Best thing i ever bought.Only problem I ever had is where your equipment...
  31. Replies
    5
    Views
    1,784

    Re: TYM 1003CAB

    cant comment on the 100hp model but my T451 has been a good machine.I have the glass cab model other than a few relatively small problems(which ive posted in forums here) Im overly pleased with my...
  32. Replies
    3
    Views
    829

    Re: Trans knocking, no reverse.

    Is the noise there when in neutral and tractor not moving at all?Is this hydro or gear driven?
  33. Replies
    5
    Views
    1,325

    Re: TYM Fuel Filter urgrade

    My question would be where are you getting your fuel?Is it always from the same place?The only reason I have a water separator on mine is this is the filter my parts guy found to fit the fuel housing...
  34. Replies
    7
    Views
    1,045

    Re: 4690A Kubota backhoe help

    Keep in mind kubota does not make its own implements as far as I know.Probably it is a woods backhoe
  35. Replies
    9
    Views
    1,129

    Re: Any one with a A&I account?

    Usually any company that sells wholesale wants a copy of you resale certificate.I know here in Maine the state wants to make sure they get their fair share.
  36. Re: New to tractor painting: question #3-How to prepare gloss base coat for clear coa

    Although lacquer paints go on easy dry fast and look great when buffed to a mirror shine they are not used for automotive applications very much anymore as they are not a long lasting paint in...
  37. Re: New to tractor painting: question #3-How to prepare gloss base coat for clear coa

    You should use a scotchbrite pad to prepare the gloss finish for clear to get proper adhesion it will look good even if you don't but can peal down the road a bit.As far as waxing 100 percent carnuba...
  38. Replies
    8
    Views
    860

    Re: over head valve

    could be the valve seal or guide.How much oil we talking??
  39. Re: Anyone Have Any Experience With This Pallet Fork Grapple?

    I have purchased Pallet forks and Grapple buckets from Titan made very well for the money
  40. Replies
    81
    Views
    10,575

    Re: Pin Hole Too Big

    I buy a lot of equipment at auctions.I never buy anything at an auction with the pretense there is nothing wrong with it.I fully expect to find some issues.If I do not find anything I look at it as a...
  41. Replies
    8
    Views
    1,145

    Re: Tracking down coolant leak

    Take a flashlight look under the water pump where the shaft goes in you should see a vent hole for the bearing>It the shaft seal is bad it would be wet there at the bearing vent hole.If it has been...
  42. Replies
    36
    Views
    5,050

    Re: Quick easy ballast fill

    I loaded mine with antifreeze from the junk yard good for -35.Went to TSC got the fitting for 6.00 bought pond pump on e-bay for 23.00 and a well footvalve to go on hose in the barrell 8.00 a few...
  43. Replies
    12
    Views
    1,087

    Re: 4410 electrical problem

    Not sure what a mfwd switch is but if you have a fuse that keeps burning up it would have to be either a bad switch,bare wire,bad ground or something letting too many amps to that fuse.Time to start...
  44. Replies
    8
    Views
    452

    Re: balancing cylinder

    I put these on my stump grinder to slow the movement down they work great.Without them my grinder swings way too fast
  45. Replies
    6
    Views
    776

    Buying Advice Re: Backhoe for B2400

    The BX80 is def too big for your 2400.Also woods numbers their hoes as to dig depth the bx60 digs aprox 6ft the BX70 7ft and the BX80 8ft Ive had a woods 650 old number for the BX60 on a Iseki Bolens...
  46. Replies
    39
    Views
    7,600

    Re: stump removal

    Problem with burning is sometimes the roots will burn underground.If a root burns anywhere something could catch fire it could turn into more of a hassle than its worth.I have a shaver SC25 grinder...
  47. Replies
    2
    Views
    1,236

    Re: Bolens G274 front wheel drive problem

    Had the same problem with a G214 turned out to be a broken stub shaft in the front knuckle.Had trouble finding one.Had to go to a machine shop and have one made.It was an easy fix
  48. Replies
    6
    Views
    1,227

    Buying Advice Re: TYM 293HST TLB

    All the good backhoe manufacturers offer the subframe for their hoes to fit most tractors if you do not want it 3ph.Woods,Bradco,Ameriquip
  49. Replies
    2
    Views
    972

    Re: Replacing Fuel Filter

    The other option is to replace the whole unit with a spin on filter style look under TYM owning on here and I posted pics on what I did to my TYM what a huge difference in time and mess to change out...
  50. Re: Alternator is overcharging, need to rebuild it!!!

    I agree with the baking soda in warm water to clean up all the corrosion.Been doing this for years.I also coat my terminals with either grease or silicone dieletric compound.As far as the corrosion...
  51. Replies
    12
    Views
    1,719

    Re: Why to only use OEM paint.

    If your painting something you want to last use acrylic enamel with the hardener (catalyst).Alkyd enamel is inexpensive equipment enamel with poor color holdout especially in reds and orange's.It...
  52. Replies
    12
    Views
    1,719

    Re: Why to only use OEM paint.

    The problem isn't "cheaper paint" persay Its not even comparing apples to apples.The farm store equipment paint is most often an alkyd based paint or a synthetic enamel which pigments used do not...
  53. Replies
    44
    Views
    4,855

    Re: Need help sizing a rotary cutter

    Im thinking you should stay with a 5' as far as the woods brand goes.They are very heavy cutters to begin with.Word to the wise if you purchase a woods and do a lot of mowing.Weld plates from the...
  54. Replies
    27
    Views
    3,720

    Re: John Deere Riding mower advice

    I have seen on the net that someone is trying to bring a class action law suit to address the K46 transaxle issue.Not sure where its going or if it has happened.We have 2- 100 series riding mowers...
  55. Replies
    5
    Views
    995

    Re: 786 wiring problem

    Xfaxman is right.Could be a feedback issue.Check grounds.I once had a vehicle that when you pushed the window button for the left door the right door window would work.Turned out to be a bad ground
  56. Replies
    5
    Views
    995

    Re: 786 wiring problem

    What have You done to check it out?Fuses? corrosion in connectors?
  57. Replies
    5
    Views
    1,325

    TYM Fuel Filter urgrade

    Noticed fuel dripping from the bottom of my TYM T451 fuel sediment bowl.The original filter isn't very big.Upon inspection found the plastic sediment bowl cracked.Called the dealer and was told it...
  58. Replies
    1
    Views
    1,041

    Fuel Filter upgrade

    So my fuel filter sediment bowl started dripping.Took it off and noticed the bottom of the plastic bowl was cracked.Called the dealer and was told we can have a new one for ya in about 2and a half...
  59. Re: 1979 ISEKI TX1500F / G174 SAFETY FEATURES

    For my tractor I went to local junk yard and got 2 55 gallon drums of used antifreeze.Then tractor suppy carries the adapter to fit on valve stems and attach a hose.Got a pond pump on ebay for 23...
  60. Replies
    8
    Views
    1,276

    Re: "New" tractor owner ISEKI TX1500F / G174

    These are tough little tractors.Iseki also made these and branded them for Bolens.I had a bolens g214 for a number of years.Only problem is finding parts.
  61. Replies
    2
    Views
    1,021

    Re: TYM brake rod boots T451

    Thanks for the feedback.The last set I put on was 2 years ago and it was the 4th set in 5 years
  62. Replies
    20
    Views
    2,831

    Re: B2650 protecting paint job from fading?

    Wax will definitely help.problem is the type of paint being used to start with.Usually on tractors they use an equipment enamel which is a synthetic enamel not very good for longevity.Cars these days...
  63. Replies
    24
    Views
    3,031

    Re: Steps to remove hydraulic cylindar

    You need to remove any pressure that may be in the cylinder before disconnecting any fluid lines.Do this by actuating cylinder with unit shut off.always use safety goggles and gloves just in case...
  64. Replies
    2
    Views
    1,021

    TYM brake rod boots T451

    Has anyone else had problems with the brake rod boots bolted to the rear axle rotting prematurely?I have had to replace mine 3 years in a row.last time I replaced them over 2 years ago and seem to be...
  65. Re: 72" Woods Brushbull Extreme or 72" JD Frontier

    Word of advice if you purchase the woods.I would cut some plate and weld it from the frame to the deck underside of the mower(if you hit something they are very prone for the blade to flex and cut...
  66. Replies
    4
    Views
    611

    Re: Mahindra E350 steering

    I believe this unit is hydrostatic is it not?If so probably the steering box as I had trouble also
  67. Replies
    37
    Views
    5,758

    Re: Does ethanol blended gas gel?

    ethanol will not cause a gel situation but it will seperate with gas.They make a product you can get at the parts stores called K40 that is supposed to eliminate this.Ethanol can cause moisture to...
  68. Re: Hard starting in cool weather I thought was a common problem to the TYM tractor .

    My 451 starts up even on the coldest days on just one glow plug cycle.It has the Kubota engine in it.When real cold she will sputter for 10-15 seconds after start but then takes right off
  69. Tires Re: can I replace front tires w/1/2" smaller diameter on Kubota 4wd/hydrostatic?

    The gearing is different from front to rear on tractors to compensate for tire size.I would not change tire size.different manufacturers can be different sizes even though they have the same number...
  70. Re: Bolens G152 TX1502 Iseki 2140T Mitsu K3A Glow plugs

    John what is the part number on one of your old glow plugs?
  71. Replies
    8
    Views
    992

    Re: branson 4220 glow

    I found the plugs the part # is NGK y112ts
  72. Re: Advice on bush hog width vs rear tire width

    Correct me if Im wrong but what would it matter if the mower covers the tire tracks when indeed the tires are before the mower unless mowing in reverse.I can understand wanting a mower that protrudes...
  73. Replies
    8
    Views
    992

    Re: branson 4220 glow

    We need a little more info........Welome to TBN
  74. Re: Bolens G152 TX1502 Iseki 2140T Mitsu K3A Glow plugs

    John I have 3 glow plugs for an iseki.brand new.I bought them for mine but I found out iseki has at least 2 different glow plugs used in their bolens branded tractors.These are a little long for...
  75. Replies
    65
    Views
    9,311

    Re: Maine Trailer Registration

    I saw in the news paper where other states are complaining to maine government about their lost revenues from trailer registration.Maine is supposed to address this issue.Didn't specify as of yey...
  76. Replies
    12
    Views
    4,460

    Re: Quick Attach / Snow Pusher build

    Awesome job.Ive got a couple 9' fisher power angle plow blades.Thinking about converting one this summer to quick attach and installing a 12v diverter valve
  77. Replies
    17
    Views
    1,830

    Re: Can you find the leopard

    creekbend the head is not in the top left corner
  78. Thread: Howdy

    by carmedic310
    Replies
    8
    Views
    244

    Re: Howdy

    Howdy great to have ya here
  79. Replies
    8
    Views
    218

    Re: Hi everyone

    Welcome from Maine rickv3
  80. Replies
    9
    Views
    273

    Re: Hello from new member DHB

    Welcome from Maine
  81. Replies
    17
    Views
    1,830

    Can you find the leopard

    can you find the leopard in this photo
  82. Replies
    23
    Views
    5,589

    Re: Riding Lawn mower rim is rusted on axel.

    Sounds like you need a heat wrench.Heat the hub with a torch
  83. Replies
    88
    Views
    15,266

    Re: Synthetic vs. Dino. By a Mechanic.

    oops didn't know there was a rocket scientist on board
  84. Replies
    62
    Views
    8,094

    Re: How To Cut Half Inch Steel?

    Just a suggestion.When ya don't have the means you do what ya gotta do.I would cut it for free with my plasma cutter if he were close enough.
  85. Replies
    62
    Views
    8,094

    Re: How To Cut Half Inch Steel?

    Take a 1/8 drill bit. drill a series of holes then use your cut off wheel lot less time you have to dodge sparks
  86. Replies
    42
    Views
    9,526

    Re: Enjoying my David Brown 780 Selectomatic

    Welcome from Maine
  87. Replies
    88
    Views
    15,266

    Re: Synthetic vs. Dino. By a Mechanic.

    Amsoil has a so called warrantee.If you first run their brand engine cleaner thru your engine.Then change to their synthetic oil(very pricy)and use their filter.Change the filter every 3000 miles and...
  88. Replies
    31
    Views
    10,187

    Re: Painting and working on old tractor

    I would use a 2k urethane primer.PPG also has a primer called DP40 or dupont variprime all excelent primers.As far as topcoat a synthetic enamel wont last as long as a acrylic enamel.A urethane...
  89. Replies
    45
    Views
    3,635

    Re: No hydraulics... GAH!!!

    You could use a bullet heater to warm her up
  90. Replies
    6
    Views
    1,644

    Re: TO-20 Clutch / Brakes

    I would replace the clutch pressure plate and release bearing at the same time also the pilot bearing too.If you can the flywheel should be resurfaced but its not critical on a tractor as much as a...
  91. Re: Shop Floor Epoxy's, Which ones to use/stay away from. Also Drylok ?

    Sherwim Williams makes an awesome epoxy floor coating tough as nails after it cures
  92. Replies
    9
    Views
    584

    Re: TC35HD leaky hydro filter

    Never put a spin on filter tighter than you can get it with your hands.You will pay for it when its time to change it again if you dont mess the thread up first
  93. Replies
    10
    Views
    2,230

    Re: Kioti lk 3054 hard start

    Block heater that goes in one of the expansion plugs"freeze plugs"are the best ones to use if you can.You could also consider a magnetic oil pan heater if your oil pan is steel
  94. Replies
    24
    Views
    2,568

    Re: F350 running problems

    Thats what I thought also"if the cam sensor is bad it wont run at all"NOT TRUE my truck ran and would quit wait a while it would start again.sometimes it would go days without bothering and others it...
  95. Replies
    24
    Views
    2,568

    Re: F350 running problems

    I was having the same problem with my international 4700 with 7.3 turned out to be the cam sensor 23.00 and easy to get at on mine anyway
  96. Replies
    16
    Views
    5,144

    Re: Countyline tiller

    Awesome buy.Just make sure you check those gearbox mounting bolts.Definatly the deal of the day.
  97. Replies
    5
    Views
    2,027

    Re: Hazard lights not working

    I was going to suggest you check for power with a test lite on back of your switch.Glad ya found the problem
  98. Replies
    6
    Views
    1,644

    Re: TO-20 Clutch / Brakes

    Replacing the clutch isn't a hard job just time consuming.I suggest you get a repair manuel look it over first then determin if you think its something you can handle.Your the only one who knows what...
  99. Replies
    5
    Views
    2,027

    Re: Hazard lights not working

    could be a flasher some units use 2 flashers one for turn signals and one for emergency flashers
  100. Replies
    46
    Views
    2,810

    Re: Shielding gases

    Stargon gets better penetration than argonco2
Results 1 to 100 of 160
Page 1 of 2 1 2
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.