Search:

Type: Posts; User: sandyc; Keyword(s):

Results 1 to 100 of 1404
Page 1 of 15 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    3
    Views
    208

    Re: Transmission filter on BX2370

    Next time will be a breeze. New machine's filters are painted on.
  2. Replies
    5
    Views
    312

    Loader Re: B2620 Steering Hesitation

    Believe turning the steering lock to lock a few times will get the air out
  3. Replies
    3
    Views
    239

    Re: changing tractor hydraulic dust covers

    Use wire ties?
  4. Re: LA211 Loader from tractor that burned down. Safe to use? (Pics inside)

    You might want to pull all the pins at the various pivot points and clean the pins as well as replace the grease zerks
  5. Replies
    4
    Views
    173

    Re: L2800 Starter Problem

    Could it be a sticky bendrix drive? At some point you might need to get either a new one or get it rebuilt.
  6. Replies
    29
    Views
    4,001

    Re: Engine RPM problem on my BX24

    If the filter change doesnít work try loosening the fuel filler cap. Sometimes they get plugged up .
  7. Snow Re: Quick attach Snow plow for B series tractor

    U canít have the sub frame quick attach on and also have the fel attached. The sub frame also connects the mid pto to the blower or sweeper . Not sure if torrin wants to convert a skid steer qa to...
  8. Replies
    22
    Views
    1,233

    3-Point Hitch Re: Hairpin Clip Mystery

    Amazon
  9. Replies
    9
    Views
    614

    Re: Kubota BX jack question

    I use the ramps I use on my cars.
  10. Replies
    8
    Views
    1,470

    Traction Re: Kubota on the news

    Maybe 20 here. I have a broken wrist and canít shovel but my3350 will blow the snow!
  11. Replies
    12
    Views
    608

    Re: B7100 Leaking Coolant From Overflow

    Head gasket ?
  12. Replies
    5
    Views
    499

    Re: B2650 PTO Gear Shift

    Had a similar problem on my 3350 and found that the problem was lack of lubrication on the right side of the case. Follow the linkage to where it connects to the left side of the and then look to...
  13. Replies
    13
    Views
    1,516

    Re: Snowblower Wings Homemade

    My 3350 with wings on the blower does not pull to one side when blowing snow on one side
  14. Replies
    11
    Views
    408

    Re: Fuel Filter Maintenance for L3200

    There might be two o rings, one on the clear cover and another for the center. At least thatís what my 3350 has. The larger o ring is sold separately.
  15. Replies
    12
    Views
    400

    Re: L5030 Three point hitch issue.

    On my 3350 the 3ph is gravity drop. Makes me think some of the linkages may need to be lubed. Just my 3cents
  16. Replies
    141
    Views
    11,794

    Re: outdoors with the Morgans

    Yup, tier 4 regens while it works. Just have to be mindful to keep rpms up until regen is finished.
  17. Re: Kubota BX1850 + BX2750D + hydraulic rotator stuck

    I have a sand driveway and found after a few years that the plastic ring bearing gets rather worn and that causes some gear mesh problems. A new plastic ring was a few bucks and helped my chute...
  18. Replies
    23
    Views
    2,491

    Re: Kubota VS WIX/NAPA oil filters

    This whole thing reminds me of an old expression......"penny wise, pound foolish".....
  19. Replies
    23
    Views
    2,491

    Re: Kubota VS WIX/NAPA oil filters

    Being an old guy I use motorcraft in my fords, kub ota on my tractors,
  20. Replies
    237
    Views
    85,334

    Re: Kubota B3350 tractor regeneration problems

    Trade you snow and the minus 22 we had the other day!
  21. Replies
    237
    Views
    85,334

    Re: Kubota B3350 tractor regeneration problems

    Went out to blow some snow today and thought about regens and had the feeling it was impending.
    I was right....worked great as usual. My 3350 was upgraded and I've had no problems because my dealer...
  22. Replies
    20
    Views
    1,521

    Re: Cold weather tractor problem

    You might want to look at getting/making a winter front for the rad. That might help to keep the heat in and the pcv free to operate.
  23. Replies
    23
    Views
    988

    Oil & Fuel Re: Kubota 1100VTX won't start

    There will be a lot of hard starts tomorrow in new England. Just changed my filter and dumped out a bunch of jelly. Added 911 to my tank, plugged in the block heater , started it up and ran it for...
  24. Replies
    24
    Views
    1,196

    Re: Coolant Leak from block heater? Kubota BX

    Teflon tape for the threaded kind works. I installed a threaded thermostat in a 2200 a few years ago and had to redo it using tape. Threads on castings are not that tight
  25. Replies
    83
    Views
    7,101

    Re: Starting Your Kubota in Cold Weather

    Always use power service in fuel, synthetic motor oil, battery tender, and block heater. My block heater is plugged into a WiFi plug such that I can schedule time to turn on or do it manually....
  26. Replies
    17
    Views
    1,043

    Re: Snowblower skids excessive wear?

    Maybe you mentioned it.....Are you using the float position. If not you should, I think...
  27. Re: HST Tractor, Transmission fluid 4 inches above full line on dipstick. Safe for us

    Low tire? Uneven ground? Doesnít make sense that youíd have such a large swing in volume.
  28. Thread: It's mine!

    by sandyc
    Replies
    9
    Views
    727

    Re: It's mine!

    Time for a new one! Congrats
  29. Thread: New BX2380

    by sandyc
    Replies
    26
    Views
    2,597

    New BX2380

    Donít know if you got shear pins/bolts or not for the blower. Might want to get a handful. Also, look at the instructions for replacing the shear pins before you have to replace a broken one.Just...
  30. Replies
    20
    Views
    1,718

    Re: Backhoes and rim guard

    When I had a tlb I asked the same question. My dealer filled my tires as part of the deal as well. I had no problems at all. The outriggers lifted the rear end and everything was stable .
  31. Re: Block heater or in line coolant heater for my BX2230

    Watch out removing the freeze plug. There was a thread last year about someone who drilled out the plug and put a whole into a cylinder. My 3350 has a screw in heater and when itís below zero it...
  32. Replies
    4
    Views
    1,721

    Re: L3000 won't start

    Safety switch. I did the same thing when I bumped the pto lever getting out of the cab and nothing would happen.
  33. Replies
    16
    Views
    2,908

    Re: bx LA 243 loader grease zerks

    Should be sae not sea. If I need to replace a zerk I match it up to a new one and install it gently to insure it is the right size and thread and then tighten it down.
  34. Replies
    16
    Views
    2,908

    Re: bx LA 243 loader grease zerks

    Some zerks are metric and some not. I think it depends on where the unit was made. Because of this I have assortments of both metric and sea.
  35. Replies
    4
    Views
    600

    Re: B2782B Front Mount Blower Maintenance

    I drilled a hole with a step drill at the cover top. Allows me to spray or use chain saw oil and pour it over the chain as necessary. I need to get a rubber grommet or stopper to prevent water...
  36. Re: Are the Zerk Fittings on the Tie Rods (L3800) PRESSED In or do they SCREW in?

    I'm guessing the zeros are threaded on.
  37. Replies
    51
    Views
    7,435

    Re: Noise Reduction - Cab vs No Cab

    I'll take a bit of noise over a face full of snow at zero degrees.
  38. Replies
    14
    Views
    2,273

    Re: Need to change hydraulic oil in L3430

    Lowes sells large plastic bins for mixing concrete and other stuff. Makes a cheap but large catch can for draining anything.
  39. Replies
    13
    Views
    3,134

    B2650 entry step

    I'm a petite 136 pounds and I can make the cab shake a bit. I agree that the cab's rubber isolater cause the motion but if the cab was solid mounted to the frame the noise would be terrible.
  40. Thread: Dpf issue.

    by sandyc
    Replies
    31
    Views
    7,741

    Re: Dpf issue.

    Mine is up to date and runs like a champ. Hardly notice Regen unless I happen to look at the dash
  41. Replies
    16
    Views
    2,262

    Re: BX2200 motor cutting out ??

    Check the fuel cap and make sure it is clean.
  42. Replies
    30
    Views
    7,163

    Re: Dolly for Backhoe?

    I had a lighter bh and made a dolly using 3 moving furniture dollies and some 2x4 to hold them together. The rig would move on cement if the floor was very clean Lowes sells the furniture dollies I...
  43. Replies
    20
    Views
    2,453

    Re: Snowblower for a Kubota L4610hsthc

    A couple of other things you should no is that a front mount blower requires a sub frame,with related drive shafts. You might want a hydraulic chute rotator ($800). All the pieces and parts add up...
  44. Replies
    20
    Views
    2,453

    Re: Snowblower for a Kubota L4610hsthc

    I have used front blowers/plows for years. The front, for me is a nobrainer. I can switch from plow to blower in a couple of minutes. On my 3350 you have to remove the feel in order to use the front...
  45. Thread: axle bolts

    by sandyc
    Replies
    20
    Views
    3,136

    Tires Re: axle bolts

    Ok. I traded in my 2920 and don't have a by. I wonder if I can read that in one of the manuals. Oh well, no problem. Time for my nap to get ready for some snow blowing tomorrow. + 20 inches expected...
  46. Thread: axle bolts

    by sandyc
    Replies
    20
    Views
    3,136

    Tires Re: axle bolts

    Maybe I missed something but I remember reading something about rear wheel fasteners would loosen if you used the backhoe and had the wheels off the ground and brake off. At my age who knows what I...
  47. Replies
    26
    Views
    3,013

    Re: L40 Cab owners-- what is this elec. connector?

    Just for grins, put a volt ohmmeter on it and see if it is 12 volt power. Also see if it is switched power. Previous owner may have had a fan or something like that.
  48. Re: New Kubota M7060 HD12 a (%&*$! to get out of Park

    Sounds like a dry link. Might want to look at linkage
  49. Replies
    100
    Views
    32,461

    Re: New Kubota with DPF Filter

    My 3350 has been upgraded and now I hardly notice regens
  50. Replies
    9
    Views
    1,420

    Re: B2150 Seat Replacement

    Ouch! Try your local farm store or maybe eBay or Amazon
  51. Re: B21 starts, stalls. Below freezing, Gelled fuel line?

    There is also a "911" product in a red bottle
  52. Replies
    13
    Views
    1,693

    Re: Kubota L4610HSTHC

    Welcome. Nice machine. Just checked your bio to confirm you are a Mainah as most folks might not understand "camp". We're near west side Sebago.
  53. Replies
    10
    Views
    2,282

    Re: Picked up my B2650HSTC

    Congrats. You'll enjoy the heat in the winter
  54. Replies
    130
    Views
    17,374

    Snow Re: Going through second stage bolts

    One other thought, make sure the front impellers are opposite on the shaft. If they aren't 180 degrees from each other they may be jamming too much snow in the impeller.
  55. Replies
    6
    Views
    877

    Re: MX4800 3pt lever getting stiff

    Follow the linkage and lube every connection
  56. Replies
    81
    Views
    47,745

    Regeneration Mode

    On my 3350 I don't really feel any change in power. The exhaust temperature is a lot hotter. At +5 it took almost 25 minutes even with the winter front on. Most of that time was getting up to temp.
  57. Replies
    7
    Views
    904

    Re: Float Switch 3430

    Sorry about that. You're right I should have said push forward beyond the detent. I guess I need a nap!
  58. Replies
    7
    Views
    904

    Re: Float Switch 3430

    Move the fel control firmly to the right like you u we're going to dump the bucket.
  59. Re: I bought a brand new tractor with rust, fading and electrical issue. Paranoid?

    My 3350's hst has to be warm before measuring. Also, you have to double dip the dipstick as air fills the tube on the first dipstick withdrawal and makes the level appear to be lower than it is.
  60. Replies
    87
    Views
    9,934

    Re: Fuel Additives for Kubotas

    Use power service all year. No problems!
  61. Thread: L3301 HST Leak

    by sandyc
    Replies
    18
    Views
    4,194

    Re: L3301 HST Leak

    Could be hydro fluid from connecting fittings for blower or loader. Just a thought.
  62. Replies
    4
    Views
    1,780

    Re: L5740HSTC mid-PTO stuck?

    My 3350 mid pto acted the same way. I followed the rods to the hst and sprayed the heck out of everything. No go. I looked at the parts list on merricks and noticed that the hst connection...
  63. Replies
    130
    Views
    17,374

    Snow Re: Going through second stage bolts

    Run wot and that should help. Slower rpms can put stress on the bolts
  64. Replies
    6
    Views
    1,058

    Re: Oil Consumption?

    My two cents. Did you verify that the oil level was at top level when del'd? If have found that the volume shown on the dipstick will show a bit low unless I double dip it as air builds up in the...
  65. Replies
    7
    Views
    1,213

    '96 L2900 front blade / plow

    Subframe has to be removed in order to use fel. On my 3350 it takes like 2 minutes to drop frame and plow/blower and another 2 minutes to install fel. Worst part of switch is unfreezing fel hydro...
  66. Re: BX2360 front snowblower - how to keep it from digging in?

    That pipe thing sounds interesting
  67. Re: BX2360 front snowblower - how to keep it from digging in?

    I plow my gravel drive til it freezes. From there on out or until the next thaw I use my blower. It takes but a minute to switch between those implements. Heck I'll even drop the subframe and put the...
  68. Replies
    4
    Views
    950

    Re: Kubota M110 Air conditioner

    My 3350 HSDC almost blows the doors open! The ac in the summer will freeze me out, the heater in the winter allows me to remove snow wearing just a t-shirt. I keep thinking the cab is overkill...
  69. Replies
    34
    Views
    5,784

    Re: L4400 cracked rear hubs

    I read somewhere that keeping the rear wheels elevated while using the backhoe will cause the lugs to back out. Don't know how that works and if that is valid but it might explain why the studs are...
  70. Replies
    8
    Views
    1,307

    Re: rolling enging on cold start

    I use power service in my fuel all year. That plus a block heater help mine to start up in the coldest weather.
  71. Thread: Grease Zerks?

    by sandyc
    Replies
    33
    Views
    6,044

    Re: Grease Zerks?

    Amazon sells them. I use them on the mid drive shaft u joints and snow blower shaft. Keeps dirt out until the ground freezes
  72. Re: changing frt-end-loaders hydraulic seals-fluid loss/replacement

    I thought I remember reading that turning the steering lock to lock a few times would also serve to purge air from the system. I an old guy so my forgetery might be off.
  73. Replies
    16
    Views
    3,145

    Re: BX25 vs. B3350HST

    The 3350's four cylinder turbo-charged motor gets the job done. The cab, if you get that model keeps you warm in the winter and cool in the summer.
  74. Replies
    3
    Views
    1,159

    Re: B2650 Mid PTO question

    I have a 3350 and there is a clicking sound coming from the rear pto area. Been there since day one and doesn't seem to effect anything. Got another year under warranty so we'll see. I only use the...
  75. Replies
    21
    Views
    3,516

    Re: Losing power and stalling

    You might want to see if the vent in the fuel cap is plugged. You mentioned lots of dust and that might have clogged the vent. Good luck
  76. Thread: New L2501 owner

    by sandyc
    Replies
    11
    Views
    3,373

    Oil & Fuel Re: New L2501 owner

    Been reading these posts regarding tipping. When I had a cabbed 2200 I thought it was really tippy. I removed the cab and even when mowing the same hill I thought it was more stable. The cab weighed...
  77. Re: Is joystick/valve wear normal? Dealership says it is?

    Had a similar issue and the valve was covered by Kubota even though it was out of warranty. Tells me that they had a known problem. Good luck.
  78. Replies
    6
    Views
    1,646

    Re: L3430 engine oil dipstick vs Specifications

    I've had these issues with all of my various kubotas. I think someone has a problem with metric conversions.
  79. Replies
    15
    Views
    2,854

    Re: Engine Break-In RPM

    If you have a tractor that has to regen that will mean that it has to go wot in order to maintain the heat needed to burn the crud out of the filter. If you do a parked regen the computer runs the...
  80. Replies
    3
    Views
    840

    Loader Re: hydraulic hose replacement

    Kubota suggests turning the steering wheel from lock to lock a few times to purge air in the system.
  81. Re: Just changed the hydraulic oil in my B7510 HST for the first time.

    The dip stick variations are, I think, caused because air bubbles from the previous run are trapped in the dip stick tube and push out fluid. Once you pull the stick the fluid rises to its proper...
  82. Thread: New to forum

    by sandyc
    Replies
    9
    Views
    934

    Re: New to forum

    Welcome to TBN . Like was said before. Low and slow!
  83. Thread: axle bolts

    by sandyc
    Replies
    20
    Views
    3,136

    Tires Re: axle bolts

    I remember reading somewhere that raising the rear wheels while back hoeing and not setting the brake will cause the rear wheels to become loose. Wonder if that started the issue?
    Agree that loctite...
  84. Replies
    13
    Views
    2,040

    Insurance Re: Kubota Buyer Protection Plan

    It's not a buyer protection plan. It's a seller protection plan. There are no titles and Kubota does need to file ucc's
  85. Replies
    11
    Views
    2,692

    Re: Get a BX25D through a 47" gate?

    Drop the bh next to the fence, drive through and then use a short chain to lift it. Might need a large weight box as a counter-weight.
  86. Thread: Oil leak

    by sandyc
    Replies
    9
    Views
    1,714

    Re: Oil leak

    Grey market are imported used from other countries. Kubota has some info on grey market on their site.
  87. Replies
    12
    Views
    3,115

    Re: BX 2350 Oil Question

    Once I hit 50 hours I change to Amsoil. I have found that the engine is much quieter in the winter with the synthetic. Just my 2 cents worth.
  88. Replies
    8
    Views
    1,962

    Re: Kubota B2650HSD Hydraulic Drain Points

    You might want to review your manual before you drain the hst. I think it requires filters only.
  89. Replies
    10
    Views
    1,893

    Re: BX2200 hydro pedal pivot access?

    I find that when a zerk won't take grease I put in a new one and that generally solves the problem. Doesn't cost much to try and may be easier than tearing the tractor apart. Just a thought.
  90. Thread: Turf Tires

    by sandyc
    Replies
    12
    Views
    2,991

    Re: Turf Tires

    Remember cost of beet juice for the rears if you are going to run loaded tires
  91. Replies
    12
    Views
    4,602

    Re: ? about HST/Hydraulic Oil for L3901

    One thing to note about reinstalling your FEL is that if it sits in the sun disconnected you may have to release pressure before the fittings will snap together. I use an old metal rod to push on the...
  92. Replies
    25
    Views
    4,788

    Re: After one year....

    Most of my hours are winter for plowing and blowing. In summer it is used just enough t o keep the mice from settling in! Bought it with 65 hours on it and it's been a year and I have added another...
  93. Replies
    284
    Views
    126,868

    Re: Kubota B2650 and B3350 info and hints

    I asked my dealer if he about the switch in the auto gen button and he didn't know about it. I haven't regenerate since the upgrade as we are between seasons. Guess I won't push the button and see...
  94. Replies
    237
    Views
    85,334

    Re: Kubota B3350 tractor regeneration problems

    10-4 on the over regulations. My 51 ford flat head had only a breather tube that emptied under the car. I could handle every repair with a screw driver and a hammer.
  95. Replies
    237
    Views
    85,334

    Re: Kubota B3350 tractor regeneration problems

    Thanks for the info and suggestions Bumperm. I agree about the parked regen and the waste of time and diesel. This whole system is a bit of overkill for someone like me who basically uses my 3350 for...
  96. Replies
    237
    Views
    85,334

    Re: Kubota B3350 tractor regeneration problems

    I sent an e-mail to my dealer asking him to let me know if the button function had been reversed. I'll advise his response. In the meantime I am not going to push the auto regen button when I start...
  97. Replies
    10
    Views
    3,218

    Re: Rust oleum Lobster Red - Search in Canada

    Try Amazon they show it on their site
  98. Replies
    237
    Views
    85,334

    Re: Kubota B3350 tractor regeneration problems

    Since my updates earlier this year I haven't run my 3350 much as we are between seasons and didn't get much snow at all. Seems to run great. Starts right up and warms up very quickly. I do not think...
  99. Replies
    44
    Views
    8,546

    Re: snow pusher vs. rear 3pt blower

    I use both a front blade and a front blower. Blade is used until ground freezes or small snows. Blower for everything else. The quick connect for the implements means I can change over in a couple of...
  100. Thread: chute rotation

    by sandyc
    Replies
    5
    Views
    1,016

    Snow Re: chute rotation

    Agree with the shovel! Spent too many years/hours digging out from under the white stuff.
Results 1 to 100 of 1404
Page 1 of 15 1 2 3 4
© 2018 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.