Search:

Type: Posts; User: Coyote machine; Keyword(s):

Results 1 to 100 of 4958
Page 1 of 50 1 2 3 4

Search: Search took 0.36 seconds.

  1. Replies
    5
    Views
    165

    Re: Tree removal.. help?

    A stump grinder would take the stump down as far as you pay for. There would be no hard stump left if done right, just dirt and chips.
  2. Re: Cold start issues, which fluid needs a heater?

    You are hijacking this thread; start your own thread.
  3. Re: Cold start issues, which fluid needs a heater?

    Most have stated fuel issues; and it isn't starting or running, only cranking currently- no fuel to the engine based on what the OP described.
  4. Re: Cold start issues, which fluid needs a heater?

    I can't believe this discussion is still going on with all kinds of different ways of doing what I suggested pages ago. You have already verified fuel at the base of the injection pump, where the...
  5. Re: Cold start issues, which fluid needs a heater?

    Solvent needs to be injected through the injector at very high pressure to clean them on a pop tester machine. This process cleans them out and verifies what pressure they open at, and whether their...
  6. Re: Cold start issues, which fluid needs a heater?

    TSO,

    It's NOT the glow plugs keeping it from starting, it IS fuel delivery. The glow plugs will help get it started if functioning, BUT without proper delivery of clean, properly atomized fuel...
  7. Re: Cold start issues, which fluid needs a heater?

    I'd have to imagine there is a fuse in the glow plug circuit. I suggest finding it, checking it, and going from there.
    Then, if no blown fuse, it's time to check the actual injectors. Remove them,...
  8. Replies
    28
    Views
    637

    Re: kioti 1200 backhoe hydraulics

    Thanks, I just wanted to clarify how my tractor/hoe works in case it might be useful to you in your attempts to solve your particular situation.
    I'm no hydraulics guru by any means, but I do know...
  9. Replies
    28
    Views
    637

    Re: kioti 1200 backhoe hydraulics

    BTW, I did not say the FEL has no power when the hoe circuit is in use; it has reduced lift as a result of most hydraulic flow being directed to the hoe's use.

    Have you removed the filter you put...
  10. Re: Cold start issues, which fluid needs a heater?

    I would try cracking open an injector line above the injector and see if cranking the engine delivers any fuel to the line/injector fitting. If not, when you've warmed up the IP and rest of the fuel...
  11. Re: How important is spelling and punctuation to you?

    Incorrect usage of weather above. Weather is cloudy. Whether is what you were trying to say. Put me on your ignore list; I have no patience for those who choose ignorance as a way of life. No one is...
  12. Re: How important is spelling and punctuation to you?

    Spelling, punctuation, and grammar are important to me. I often make mistakes here and try to minimize them by using spell checking, which is automatic red underlining of text as I write. I post then...
  13. Replies
    27
    Views
    1,013

    Re: Dealing with pipes freezing?

    Via a heat exchanger where each zone is isolated from the boiler's water, like I have with my solar domestic water, that has an exchanger in a separate tank. It gives up heat to the boiler water in...
  14. Thread: feleds

    by Coyote machine
    Replies
    10
    Views
    375

    re: feleds

    Welcome to TBN. You need to edit your post and remove your email address from it. NOT good having it there.
  15. Replies
    27
    Views
    1,013

    Re: Dealing with pipes freezing?

    If your system is zoned properly, you should be able to just add Propylene Glycol to that zone, and not to the entire system. It may require periodic draining and renewal to allow for proper heat...
  16. Sticky: Re: Repair Option for Kioti tractors with broken Injection Pumps

    It would depend on what parts it needs. I've spoken to the head guy, Joel a while back about an IP repair on a different brand tractor, where the IP was in need of hard to obtain parts. They did a...
  17. Replies
    27
    Views
    1,013

    Re: Dealing with pipes freezing?

    Propoylene Glycol, the non-toxic type anti-freeze used in the heating system and solar domestic water collectors does reduce the overall heat transfer more than just water, but it's a trade off. One...
  18. Replies
    73
    Views
    2,767

    Re: Heat pumps

    OldMcDonald,

    No problem. Terminology can get confusing, especially when there are lots of different types of 'heat pump' configurations available.
    I tend to agree that some, if not most...
  19. Replies
    28
    Views
    637

    Re: kioti 1200 backhoe hydraulics

    My DK-40 se/HST tractor, with Kioti hoe, KB-2485, uses the tractor's hydraulic pump, and is controlled by a detented lever that engages the hoe's hydraulics. If I try to use the FEL while the hoe...
  20. Replies
    73
    Views
    2,767

    Re: Heat pumps

    I live in wicked cold zone here in VT. Last week we had -27* in the area. I run two Fujitsu mini-splits that are rated to be able to produce heat to -15*. Our state's electric Co., GMP, was...
  21. Re: New CK35 Owner Cold weather question.

    Welcome to TBN and the Kioti O/Operating forum. I suggest going through the today's posts list at top of the page and read up on solutions to cold weather starting. It's diesel specific, not a brand...
  22. Replies
    28
    Views
    637

    Re: kioti 1200 backhoe hydraulics

    Welcome to TBN.:thumbsup: Sounds like Leejohn may be on the right track. PB=power beyond, BTW.
    I'm not a hydraulics guy so I'll bow out. Good luck.
  23. Re: Cold start issues, which fluid needs a heater?

    Could depend on how/where it was sitting; if the lines/filter were exposed to wind the freezing effect could have been significant. Changing the filter out by itself could help track back to cause....
  24. Re: cold weather problems regarding fuels.

    Milky indicates water in your fuel. You should change out your filters and make sure what is coming out of your tank is NOT milky. You should be using only cut fuel that is already set to handle...
  25. Replies
    30
    Views
    1,635

    Re: tires cut, but how?

    The local tire store's newest salesman?:)
    Is the tire useable?
  26. Replies
    25
    Views
    465

    Re: dk35 se not starting

    That schematic info is all in the service manuals, as it is for just about any tractor/vehicle.
  27. Replies
    25
    Views
    465

    Re: dk35 se not starting

    So it DOES start if you get the range selector in the 'sweet spot' close to either neutral?
    And when it starts, you're showing it's in gear on the display, even though it's actually in neutral?
    If...
  28. Replies
    25
    Views
    465

    Re: dk35 se not starting

    The "range selector" lever is read by a potentiometer, (similar to a switch, but it reads a scale from 0 to 5 Volts, rather than just on/off).
    If you move the range selector to the forward neutral...
  29. Replies
    11
    Views
    742

    Re: Washing nasty parts

    Scrape off crud, spray with Brakleen, use air to blow off residue. Funnel into used oil container, dispose of at TSC or similar waste disposal collector. Throw shop paper towels into trash. Done.
  30. Replies
    25
    Views
    465

    Re: dk35 se not starting

    Who told you that? What did 'they' say it was? Why ask here if you've already been told what it is?:confused2:
  31. Replies
    72
    Views
    12,243

    Re: what paint will hold up best

    Zar2usa, Can't access any of your attachments...
  32. Replies
    45
    Views
    4,313

    Re: Private Gravel Road Woes

    You need to figure out what base is already in place, where the most problematic sections are, what drainage, culverts, ditches, etc. already exist and what of those are actually functional. Then you...
  33. Replies
    17
    Views
    875

    Snow Re: Quick Attach Plow?

    I use a diverter valve from Brian at Fit-Rite-Hydraulics, an approved advertizer on TBN. It bolts to the existing bolt hole in the rear of my left rear fender and routes control of my front mounted...
  34. Replies
    17
    Views
    875

    Snow Re: Quick Attach Plow?

    Skip the pin routine, get a QA plate, and a crossover valve on your plow hydraulic lines to/from plow - once and done.:thumbsup:
  35. Re: Possible to over-rev my diesel tractor?

    Those are some of the reasons I bought the canopy, though I would caution against reliance of protection against widow makers, depending on size.
    Depending on tasks to be performed, a roll over box...
  36. Re: Possible to over-rev my diesel tractor?

    No, I bought the canopy from my Kioti dealer. He had a poly or fiberglass Kioti orange one that was old stock and scratched, and I didn't want it, even with $200 off.
    I found out he had the diamond...
  37. Re: Possible to over-rev my diesel tractor?

    Buggs,

    I have a radiant floor new barn with 2 full bays, 2 half bays, and a huge boat bay. The boat bay is the only cold bay- no heat, but well insulated. Two, 2 ton chainfalls and suspension...
  38. Re: Best garage floor tiles? Polypro or recycled rubber/plastic? Anyone use Swisstrax

    Thanks for the link. What type of 'shop' are you covering with the Flezco product?
    The Swistrax I've been looking at online is 3/4 inch thick. I'm considering various options, but the product I...
  39. Re: Best garage floor tiles? Polypro or recycled rubber/plastic? Anyone use Swisstrax

    Yah! Me very interested! Do you have any pics of your shop install? And please do shoot me the 2nds guy info.

    Thanks,

    CM
  40. Re: Possible to over-rev my diesel tractor?

    Thanks Don!:thumbsup:

    As we 'speak' I'm in the tail spin of one of these never quite ending storms. My contractor tried to get to my house today, and was only able to get to my driveway due to...
  41. Replies
    23
    Views
    1,631

    Re: Blizzard conditions and air filters

    Anything that has an air filter as part of it's engine assembly needs to have the air filter in place and functional, otherwise engine damage can occur. Frozen snow = water when thawed by engine...
  42. Replies
    5
    Views
    358

    Re: HELP before snow starts again

    Did it break off flush with the PS cylinder's threaded rod? If so, you may have to drill out the rod end and temporarily screw it back onto the remaining threads of the PS cylinder rod. It may not...
  43. Replies
    12
    Views
    685

    Re: Cutting edge protector

    If it is the correct edge for your bucket it will save the bucket's factory edge from wearing on the corners.
    Better to wear a reversible/replaceable edge than the bucket's original edge.
  44. Replies
    6
    Views
    405

    Re: injector pump internals stuck...

    You've succeeded in taking apart a very close tolerance IP that you say has sat for years with water in it's fuel tank. Do you even know which pump plunger goes with what cylinder? The questions you...
  45. Replies
    23
    Views
    1,631

    Re: Blizzard conditions and air filters

    Might have to make up a deflector/shield to restrict snow from being easily drawn into the intake, or better yet, not plow when the storm is forcing air into the air intake/filter and eventually your...
  46. Best garage floor tiles? Polypro or recycled rubber/plastic? Anyone use Swisstrax?

    Have been seriously thinking of using a recycled rubber or plastic type square tile to cover my concrete floors in my house and barn garage bays.
    I've considered paint, epoxy, etc. but have heard of...
  47. Re: Possible to over-rev my diesel tractor?

    Buggs67,

    Not to worry; I'm not seeing your wanting to know how to best use your tractor as being argumentative in any way.
    I made a mistake about your tractor's ranges and wanted to correct my...
  48. Re: Possible to over-rev my diesel tractor?

    I made a mistake in thinking this model tractor has 3 ranges, H, M, L, BUT the OP corrected me; It only has High and Low range.:duh:
    I apologize for my error in the original, unedited post below....
  49. Replies
    260
    Views
    9,708

    Re: Impact screw drivers?

    Trash it in my direction, along with any noisy circular saws, table saws, or other louder than a toaster oven, construction tools you hate for doing the job they were intended to do. Impact tools...
  50. Replies
    260
    Views
    9,708

    Re: Impact screw drivers?

    It's called caveat emptor ~ buyer beware. It the buyer's responsibility to READ the fine print, and if they don't like the deal, then don't buy the product. Surely you're not so naive as to think...
  51. Replies
    36
    Views
    2,495

    Re: Plow protection

    Varmit,
    Thanks. I found it on my own, but thanks for the link. I haven't figured out if that is an actual available model or something that used to be available.
    There is no reference to it in the...
  52. Replies
    36
    Views
    2,495

    Re: Plow protection

    Varmit, I can't locate the parts diagrams section. Do you have a link?

    Thanks,

    CM:thumbsup:
  53. Replies
    36
    Views
    2,495

    Re: Plow protection

    I'm ok with not relaying the tech's name back to Daryl, and I don't think it was about getting anyone in trouble - I had mentioned I would see who spoke to whom. No big deal- I also asked Daryl to...
  54. Replies
    36
    Views
    2,495

    Re: Plow protection

    Here is what Daryl at horst welding, HLA told me. Daryl is the parts manager. He said the 1000 series is the economy plow and does not need a crossover valve and does not come with one because of the...
  55. Replies
    20
    Views
    725

    Re: CK35 Temp Gauge Not Moving

    Hill Billy Bob,

    Did you add oil temp gauge? If so, can you give us a pic of the install/dash?

    Thx,

    CM
  56. Replies
    36
    Views
    2,495

    Re: Plow protection

    Got it. Just suprised that they would dis their own equipment design? I will follow-up with them about this. I read LD1's post already.
  57. Replies
    36
    Views
    2,495

    Re: Plow protection

    Are you saying that HLA told you the crossover on my model snowblade 'serves no purpose'?
    Why would they say that about a design that is their own?
  58. Replies
    20
    Views
    725

    Re: CK35 Temp Gauge Not Moving

    Probably a stuck stat. Better to replace it under warranty at 50 hr svc. Check coolant rating too! What kind of ambient temps you having up there these days?
    The rise, then drop on the gauge could...
  59. Replies
    36
    Views
    2,495

    Re: Plow protection

    I have a HLA 2000 snowblade. I believe the black valve your hoses are connected into currently may be a crossover valve, but I'm not familiar with your model in particular. I suggest contacting...
  60. Re: BX25 quit running, almost starts, fires black smoke and sounds mad.

    Forget the air filter. Go get some 'cut' winter diesel from someone who sells diesel year round and cuts their fuel for winter use. Change both fuel filters and drain out the crap fuel you have in...
  61. Replies
    260
    Views
    9,708

    Re: Impact screw drivers?

    Everything should be that easy, it's not. Almost anything with a warranty of any kind has fine print clauses, meant to limit who, what when and how one can make a claim on the warranty.
    That's just...
  62. Replies
    72
    Views
    12,243

    Re: what paint will hold up best

    That's great. Name of paint, please.
  63. Replies
    260
    Views
    9,708

    Re: Impact screw drivers?

    So your expectation is the manufacturer/tool seller should be on the hook forever for tools you buy used, or without any proof of ownership, for whatever reason?! That seems reasonable to you? No...
  64. Replies
    260
    Views
    9,708

    Re: Impact screw drivers?

    Yes, I gave copious detail of my liking them, especially because of their LIFETIME guarantee on everything, batteries, tool(s), chargers; backward compatibility of the chargers/batteries. Also their...
  65. Replies
    61
    Views
    2,228

    Re: JD 110 tlb vs. Kioti dk40

    I think the answer to the OP's question is no, they're not in the same class; but what does that mean? To me, having used a Kioti KB-2485, Kioti's largest backhoe on a DK-40 for a number of years, it...
  66. Replies
    21
    Views
    1,249

    Re: February 1-2 snowstorm

    Amvcane, no prob. I often misunderstand what I'm trying to say. It's the internet- a place of confusion.
    Thunderstorms...don't give the geniuses any fuel.:laughing:
  67. Replies
    21
    Views
    1,249

    Re: February 1-2 snowstorm

    You forgot: Bozo - a clown from the 20th century. Born & bred in America, from the TV mindset, also largely made up of clowns, many of whom became weathermen on the channel of the same name. Hence...
  68. Replies
    260
    Views
    9,708

    Re: Impact screw drivers?

    Did you fab the dock framework or was it a 'kit'? What did you use to anchor the pivot point on shore?
    Where's the speedboat?
  69. Replies
    21
    Views
    1,249

    Re: February 1-2 snowstorm

    Scientists are the ones who determine long term climate patterns, not 'weathermen'.



    I hear they're hiring!



    Correct again, and I don't remember saying they were the weather people,...
  70. Replies
    25
    Views
    1,272

    Re: Use of chains on concrete floors ??

    Hey Coobie, get some Aquiline MPC chains like mine.
    Cheers!
  71. Replies
    21
    Views
    1,249

    Re: February 1-2 snowstorm

    Better tell the weather people. 'Cause they're naming 'em.:confused3::eek:
  72. Replies
    72
    Views
    12,243

    Re: what paint will hold up best

    What Ray66v said. There is no reason to use Imron today, unless you have a death wish. It's old tech and can easily be beat by today's products.
    TSC paint?! No way! They can't even keep the same...
  73. Replies
    260
    Views
    9,708

    Re: Impact screw drivers?

    I've used a bunch of different brand impact drivers. 1st was Makita 14.4V kit with drill and utility light. Still have it. One of 2 batteries is still alive. Next gen was 18V, tried my electrician's....
  74. Re: diesel stalls and sometimes engine revs super high RPMs even if I turn off igniti

    These are NOT a turbo engine. The IPs ARE susceptible to the rack jamming and the teeth breaking, making the engine rev to infinity. They can be rebuilt for way less then a new pump, but we're not...
  75. Re: Fuel Cap on 4520 (another dumb question)

    Here's the caddy I use for gasoline, but I believe they make ones for diesel too.
    Todd Gas Kart
    I throw a rope over my overhead door track and lift it high enough to use gravity feed to my...
  76. Replies
    9
    Views
    504

    Snow Attachments Re: Over a foot of snow coming to CT Today LET IT SNOW!!!!

    Permission to shift to Miller Time.
  77. Re: Fuel Cap on 4520 (another dumb question)

    Can you spray some WD-40 or similar under where it torques onto the filler tube? Or how bout a hair dryer near the cap but not too close. Strap 'wench', or a big Channel lock plier? If all else fails...
  78. Replies
    9
    Views
    504

    Snow Attachments Re: Over a foot of snow coming to CT Today LET IT SNOW!!!!

    No need to repeat yourself!:laughing:
  79. Replies
    5
    Views
    202

    Re: fuel in oil

    Stop using it until the problem is solved, otherwise the oil dilution will kill the engine. How many hours and what year tractor?
    cvettekid65 and GManBart could be right; you will have to identify...
  80. Oil & Fuel Re: Transfer tank water separator recommendations please, just got a new GPI 12v pump

    Separate out any water first after the pump, then the can filter, IMHO. That works well for me.
  81. Re: diesel stalls and sometimes engine revs super high RPMs even if I turn off igniti

    Yes, unfortunately, especially since the OP mentioned super high revs, even after turning off the keyswitch. But because of known ignition switch issues, stop solenoid failures, etc. all being...
  82. Replies
    13
    Views
    587

    Oil & Fuel Re: Anti freeze leak when really cold

    So it seems a random drop in RPMs that sometimes can recover on it's own, and sometimes, unless you drop the clutch, she stalls.
    It could still be fuel related. I would try changing the fuel filter...
  83. Replies
    13
    Views
    587

    Oil & Fuel Re: Anti freeze leak when really cold

    What do you mean by 'cutout'? I think you need to determine where the coolant leak is. Meantime, what is you coolant mixed at? Rated to -? Try cleaning the area around the dipstick tube and then try...
  84. Replies
    13
    Views
    587

    Oil & Fuel Re: Anti freeze leak when really cold

    The coolant was getting blown by the radiator fan when the engine was running. It would likely stop leaking when the engine heated up enough to swell the hose against the clamp, and the engine...
  85. Re: diesel stalls and sometimes engine revs super high RPMs even if I turn off igniti

    This thread would be better attended to if posted in the Kioti owner/operator forum. More Kioti team members will likely see it and respond. What EXACT model do you have? DK? Sounds like the fuel...
  86. Replies
    13
    Views
    587

    Oil & Fuel Re: Anti freeze leak when really cold

    Your tractor should not be leaking any antifreeze, period. Where are you located? What temps are we talking about? Is the antifreeze level dropping? Is there evidence of antifreeze in the oil? Is the...
  87. Oil & Fuel Re: Transfer tank water separator recommendations please, just got a new GPI 12v pump

    I use two Goldenrod filters, both are metal can type, one is a water separator, the second a particulate filter. I mark the date and number of gallons on them, and then run them for time or hours...
  88. Re: Advice wanted on new 2013 kioti dk40se hst cab vs 2015 LS xr4046hc

    Yes, the pedal is counterintuitive, as PDPappy said, and you will adjust to it over time. Cold is a factor too, until the hydro fluid reaches NOT, (normal op temp). And, as you use the tractor you'll...
  89. Re: Heres things the kioti wouldnt do that the kubota can

    You just need enough square footage to support the tires and you're good to go.:laughing: Six steps to the operator platform, that's how you know it cost big $$$$!:eek:
  90. Re: Blizzard 2015 What I Learned about LED Lights

    Try Strobes-n-more, I have one of their dash type strobes facing rearward under the canopy on my Kioti. And they have the CREE LED lights, the best quality, made in USA lights. These guys are law...
  91. Re: Credit card has my last name spelled wrong..

    He made one up, according to the story. He was a real shady guy, the owner, not the dog.
  92. Re: Credit card has my last name spelled wrong..

    The 'Buck the dog' credit card reminds me of a friend's BIL claimed his dog as a dependant on his taxes! True story.
  93. Re: Advice wanted on new 2013 kioti dk40se hst cab vs 2015 LS xr4046hc

    The 45 or 50 won't make any real difference, except more $$ up front. Too many $$ for just the small increase in HP, IMO.
    Compare loader lift capacities on the DK vs. the LS, and if the LS is Tier 4...
  94. Replies
    20
    Views
    901

    Re: Best way to treat tree wound?

    It's hard to tell from the picture, but it looks like the leader was cut too close to the remaining trunk of the tree. It would have been better if the final cut allowed the trunk and cut to shed...
  95. Replies
    80
    Views
    2,194

    Re: Advice on a new computer

    You guys just aren't getting it!:shocked: It's not about how many buttons; it's about the size of the buttons!:laughing::thumbsup:
  96. Replies
    33
    Views
    11,446

    Re: A question regarding purple wood.

    It's Albino Cedar. It is born purple and turns red when exposed to light.
  97. Replies
    4
    Views
    280

    Re: Replacing radiator in DK40

    Unless it has plastic headers, any good rad shop should be able to fix/recore it for you.
  98. Re: Mouse poop? Bat poop? What else looks like mouse poop?

    Get some mice for your plane?!:laughing:
    Squirrels? Set some traps and see what you catch.
    Bats are nocturnal, have you looked at night?
    What do other plane owners say is in the hangars?
    If bats...
  99. Replies
    80
    Views
    2,194

    Re: Advice on a new computer

    I've had PCs since the DOS days. Run every OS, up to Win7, currently in use on my Dell Studio 17 laptop, which I added various options to up to $4,000 price tag.
    It works perfectly, has no crashes,...
  100. Replies
    21
    Views
    1,488

    Tractor Sizing Re: New to Branson Tractors

    Congrats on your big red! What's the story with the power coat vs. paint you mentioned? Power coating is just a way of applying paint, no?
Results 1 to 100 of 4958
Page 1 of 50 1 2 3 4
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.