Search:

Type: Posts; User: oldmech; Keyword(s):

Results 1 to 100 of 425
Page 1 of 5 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    3
    Views
    273

    Re: Grillo 107d Fuel Usage

    Hi! Hi! I have a Grillo 107d with Honda GX340 11 HP. Easy to start, quiet take about two liters hour(half gal.) I have also a BCS 735 Diesel with Acme 377 cc 8.8 HP Hard to start with hand rope...
  2. Re: yanmar L100 problems (replacement engine in a John deere 110 lawn mower)

    Hi! I think May be .your engine is too tight. New piston and rings. Do you have check rings gap in the cylinder before install. So for connecting rod and bearing Do you have check clearance (with...
  3. Replies
    4
    Views
    183

    Re: Gravely 7.6 super - NO SPARK

    Hi! Check first the wiring to ground with no sparkplug. Inside magneto. They are a breaker point set. Clean or remove carbon with a file. The point set must be bright. Then adjust to .015 in. Good...
  4. Replies
    3
    Views
    546

    Grillo with Gravely rotary plow

    379041379040Hi! I can use Old Gravely implements with my Grillo via my homemade adaptor.
    I try the rotary plow for first time this year. Run pretty well.. I like old Gravely implements. They have...
  5. Replies
    7
    Views
    640

    Re: GRAHAM-PAGE Rototiller

    Hi! May be you can replace your missing magneto by Gravely L model magneto.
    Inside magneto they are breaker point. These one must be clean and bright and adjusted to .015 in.
    Magneto must be timed...
  6. Replies
    22
    Views
    1,234

    Re: Grillo g107d tire size

    Hi! For differential lock it takes about half turn of wheel for engage. For free the wheels I must sometime swing the handle bar at left and right for free the wheels. All these are normal Inside...
  7. Replies
    3
    Views
    376

    Re: Help with identifying model

    Hi I am very sorry my first thread is false or 375177wrong. You have two idle pulleys one for the short belt and other for the long belt this one go from engine to front spindle then the left spindle...
  8. Replies
    3
    Views
    376

    Re: Help with identifying model

    Hi! For Belts help . The short belt for top pulley is for power from engine to front spindle. I make a fast draw (pict) for the long belt Between 3 spindles mower. Good luck Oldmech375147
  9. Thread: Mowing 2 acres

    by oldmech
    Replies
    25
    Views
    7,023

    Re: Mowing 2 acres

    Hi! Gravely and Grillo have the same rotation. BCS Wrong or bad rotation. I can use Gravely implements with my Grillo I make a special adaptor. I dont have the 50 inch Gravely rotary mower but make...
  10. Replies
    22
    Views
    1,234

    Re: Grillo g107d tire size

    Hi! I own a Grillo 107d for now more five years. The 5-10 tire are ok for the most use. 5-12 add some height more clearance but add speed no always a good thing. I think 5-10 are a good choice ....
  11. Thread: BCS Tracks

    by oldmech
    Replies
    9
    Views
    3,481

    Re: BCS Tracks

    Hi! A Quebec BCS dealer Has one 853 with tracks. You can see on You Tube BCS tracks. I think these tracks are from ATV tracks. Expensive. But the speed are not very low. Good Luck ! Oldmech
  12. Replies
    13
    Views
    1,293

    Re: BCS Upgrade Suggestions

    Hi! For me the best upgrade was weight in wheels. BCS and Grillo are too light. The first time use with Grillo 107d and tiller. The tiller tines in soil push the tractor. I add over 80 lbs weight in...
  13. Thread: BCS 715 manual

    by oldmech
    Replies
    11
    Views
    4,496

    Re: BCS 715 manual

    Hi! For the small ACME diesel engine. For start. Look Pict 1 . You must pull speed lever at half or more 2. You must pull up the small button for (fuel primer) 3. Pull starter rope very hard and...
  14. Replies
    6
    Views
    567

    Re: Aldo Biagioli Implements - better pics

    Hi! Some years ago I make one and try it. For first 8 in. no problem but for more. Hardpan is very hard to penetrate need lot of weight then wheels spins. Too hard.
    A neighbour farmer use a John...
  15. Re: Over 2200 rpm engine huffs and puffs, blue smoke

    Hi! A man write: My diesel makes lots of blue smoke, but does not burn oil. My problem is that it makes a lot of blue smoke at anything over 1800 rpm. none below that It is never black or white...
  16. Re: Over 2200 rpm engine huffs and puffs, blue smoke

    Hi! I think Blue smoke is poor combustion in Diesel. Check fuel filter (replace by new) first. Just drain is not enough I think this is your trouble. If not. Your engine is missing fuel (Can be fuel...
  17. Thread: grillo 107d

    by oldmech
    Replies
    14
    Views
    1,179

    Re: grillo 107d

    Hi! I have a Grillo 107d for now over five years. Run fine. At first I had some clay soil. With tiller tines in soil look for push the tractor. BCS and Grillo are too light. I add weight in wheels...
  18. Replies
    33
    Views
    3,601

    Re: Lets see your machines...

    Hi! I read Gravely 5200 serie start 355 lbs to 476 lbs. First L model start 275 lbs if you add governor and starter over 300 lbs.
    Dont forget Gravely are cast iron. My Gravely L model : 275...
  19. Thread: BCS VS Gravely

    by oldmech
    Replies
    11
    Views
    1,111

    Re: BCS VS Gravely

    Hi .For mowing or snowblowing Gravely are a lot better than any BCS or Grillo Because Gravely PTO are LIVE and with two speeds one for each gear.
    Transmission with planetary and bands as automatic...
  20. Replies
    33
    Views
    3,601

    Re: Lets see your machines...

    Hi! I use a Quick Coupling. For center I make a special bushing between adaptor(quick coupling) and the SEP casing.

    The big problem is the SEP spline shaft. I make a 18x15 Din 5482 special spline...
  21. Replies
    33
    Views
    3,601

    Re: Lets see your machines...

    Hi I have a 735 diesel with ACME ADN 37/2 377cc I think 8.8 hp Very powerful because long stroke . Hard to vrank I add a compression release lever. Take about one liter hour. I use it a lot in...
  22. Replies
    234
    Views
    117,048

    Re: 2 Wheel Tractors - Buying & Using

    Hi! I like walk behind! Here we have two kinds. One is without differential as Troy-Bilt Horse BCS 710-720 etc... And Bcs Grillo etc with differential and lock.
    But They are one other. Walk behind...
  23. Replies
    2
    Views
    266

    Re: fod 4000 regulator/dynamo problems

    Hi! Generator need to be Polarized When you disconnect the battery . They are two systems One is You connect a jumper(Wire) at regulator posts between Bat terminal to Gen terminal You start engine...
  24. Re: Help with fuel consumption of 6 HP engine.

    Hi! Honda engine burns 330 gr Hp Hour. 6 Hp about 2 liters hour or half us gal. Good luck Oldmech
  25. Replies
    14
    Views
    1,549

    Re: Didn't realise what I had

    Hi! I think Your tractor has no differential and you dont need. When you squeeze one hand lever you free this wheel no power on and you can turn very thigh and easy act as steering clutch some have...
  26. Replies
    14
    Views
    1,549

    Re: Didn't realise what I had

    Hi! Beautiful tractor. We dont have here in america. Kubota and Yanmar make. But In China many companies clone them. I want know. Is your tractor have a differential. May be not. No brake. But very...
  27. Replies
    4
    Views
    1,193

    Re: Walk behind tractor trailer ideas?

    Hi! I use a modified home made VTT trailer I add a seat and a feet rest and also a special tongue for use pto water pump. This trailer dump and can load 800lbs I add a pict Good Luck Oldmech344327
  28. Replies
    2
    Views
    495

    Re: 1966 L8 oil filter

    Hi! I remember I replace it by a Fram PH8 as for Ford. But if you can find the OEM. Good luck! Oldmech
  29. Replies
    1
    Views
    624

    Re: gas or diesel ?

    Hi! AiN 330 is gas engine. I think this tag is for engine oil So AGIP is one Italy oil company. Diesel is for diesel oil grade. and MIL 1204b is certification. Good Luck! Oldmech
  30. Replies
    1
    Views
    380

    Re: Grillo OPC lever

    Hi! First try to adjust clutch cable Very important you must to have 1/8-1/4 in. play. MAY BE this could correct your trouble.I add a pict.Good luck! Oldmech319555
  31. Replies
    12
    Views
    2,037

    Re: Got a 605 BCS With 5 attachments

    Hi! I am sorry. The part number for the compression release lever kit is 492.215 I have more old engine. I have the more old head. Good luck Oldmech
  32. Replies
    12
    Views
    2,037

    Re: Got a 605 BCS With 5 attachments

    Hi! I have this engine on my BCS 735. I add the compression release lever. Small kit available parts no: 492.012 May be you can order from Earthtools. About $25 Easy to install. Good luck Oldmech
  33. Replies
    6
    Views
    1,629

    Re: Redoing ignition on Gravely walk behind

    Hi! The best is original or OEM part but I add a pict of Kohler wiring (Magneto electric start) engine. Good luck. Oldmech318437
  34. Replies
    6
    Views
    1,526

    Re: Old BCS 725 Acme Diesel

    Hi! I have and use this engine on my 735 BCS. Powerful small diesel engine (long stroke)
    You can have parts from Earthtools.
    Mine at first was stop running when fuel tank was half or less. I change...
  35. Thread: Grillo vs BCS

    by oldmech
    Replies
    40
    Views
    20,613

    Re: Grillo vs BCS

    Hi! Gas or diesel. If you plan use less 200 hrs year. Take Honda 11hp. I Have a Grillo 107d with Honda take about 2 liters hour. My BCS diesel 735 with 8hp diesel about 1 liter hour. I use the...
  36. Replies
    8
    Views
    1,454

    Re: Arien Tractor .. will not move ..?

    Hi! First look for the relief valve. The best for you look for a good Shop Manual at MTD dealer. May be air in the system. May be bad oil or bad oil filter. I know better Cub Cadet. I have some...
  37. Replies
    9
    Views
    1,347

    Re: Adapting a trailer for use with Grillo G85

    Hi! For trailer the more simple and less expensive is garden trailer . I add a pict. No problem for turn and very stable. You can add a step for foot . Now I use a Home made VTT trailer bigger load...
  38. Replies
    4
    Views
    787

    Re: BCS 715 Clutch is stuck

    Hi ! Remove or loose the nut first and remove all ( nut and hex together) and spray loose nut in the bolt hole. The hex and nut are on the key shaft motor. Good luck Oldmech
  39. Replies
    17
    Views
    2,340

    Re: run away bcs tiller problem

    Hi! I use a long time ago a front tines tiller ARIENS . We adjust the rear long coulter in soil and we can till in very hard soil. May be add a rear coulter at the BCS tiller could help for reduce...
  40. Replies
    26
    Views
    2,330

    Re: new to sight and bcs

    Hi. I have a 735 BCS as yours ( 61858 is the serial number) Mine is a 1982 sold by Mainline Before BCS America. I have a diesel and rope start. I add a pict of Wiring. This is a Charge and start...
  41. Replies
    8
    Views
    1,010

    Re: I got my Gravely home today

    HI ! For magneto turn magneto cam for maximum open you adjust .015 you turn half turn cam breaker must close (if not no spark)
    For timing They are two methods You have the first You need to remove...
  42. Replies
    12
    Views
    1,413

    Re: Maybe I'll be a Gravely owner now....

    Hi! Yes For yard jobs as Mowing or snowblowing. Gravely are a lot better than any BCS or Grillo. Gravely has the best tranny. A true shuttle no stop no clutch A planetary system as automatic. With...
  43. Replies
    8
    Views
    1,010

    Re: I got my Gravely home today

    Hi! For magneto Clean or remove all carbon on contacts Must be bright adjust to .015
    If you remove magneto You must adjust the timing
    For timing. First crank by hands until you feel compression....
  44. Replies
    7
    Views
    1,423

    Re: No first or second gear on Grillo G85

    HI! Sorry for the pict. Also you can check if PTO is running. I think you can repair for 100-200 or less. And you have good small tractor. Good luck Oldmech
  45. Replies
    7
    Views
    1,423

    Re: No first or second gear on Grillo G85

    Hi! You can first check the inverser lever . I joint a pict. Second.and not very expensive t Engine OFF You turn by hand crank You push the gearshift lever to neutral You crank tractor do not move....
  46. Replies
    8
    Views
    3,689

    Re: Goldoni better than BCS

    HI. I like the small backhoe. I just read something. On Goldoni handlebar at right one lever. Wheel release lever simply allows you to free wheel the front axle while the PTO for implement is still...
  47. Replies
    8
    Views
    3,689

    Goldoni better than BCS

    Yes For gearing.Some Goldoni have four front speeds as Jokers 11ds or 11s model or one working speed more than 740 BCS
    All Goldoni two wheels tractors are now supplied with a patented GEARSTOP...
  48. Replies
    13
    Views
    756

    Re: 2 questions I need help with???

    Hi ! For your battery you have a record. 7 years life is normal. On small lawn mower 3 years is normal .
    For your tire I think no enough pressure or tire beads are damaged. Tubes with good pressure...
  49. Replies
    11
    Views
    1,681

    Re: Any GX gurus out there?

    Hi! Before start. Drain carburator (six month) and tank (year) for remove water and dirt. With time condensation make water this one go down in tank and carb. You can use gas stabilizer. I add a pict...
  50. Replies
    4
    Views
    1,223

    Re: My Pasquali 2 wheeler

    Hi! Very good tractor. I own a Pasquali 15 years ago. This one was the better . A lot better than BCS or Grillo because more heavy Mine was all iron casting casing. not the light alum alloy they use...
  51. Replies
    4
    Views
    625

    Re: Briggs 21 hp vertical shaft question

    Hi! If you have Jump cable. Try boost battery with a good one . I think your tractor battery is over 3 years for these battery is old. A battery can have a good voltage but cannot turn engine. No...
  52. Replies
    4
    Views
    625

    Re: Briggs 21 hp vertical shaft question

    Hi! First Try to turn engine by hands if you can. If engine turn. Remove battery connectors at post Clean and remove all dirty as glaze .Connectors and posts must be brights. Bolts must be tights If...
  53. Re: Gas prices again, What's the price in your area for unleaded? What's happening?

    Hi! I paid 1.33 a liter or (1.33x3.68) 4.89 US gal. Here in Quebec we have some record. Diesel is 1.35 a liter near 5.00 Us gal Merry Chrismas and Happy New Year. Oldmech
  54. Replies
    7
    Views
    1,248

    Re: Diesel compliance ends December 31, 2012

    Hi! I know one air and oil cooled small diesel engine. This engine complies EPA Tier 4. The Kubota OC- 95 E3 . Heavy 123lbs and expensive about 3K. I ask me if new law are very good. I think small...
  55. Replies
    2
    Views
    775

    Re: BCS 715 Spline specs?

    Hi! I have a Grillo 107d The pto spline shaft is as 715-735 BCS. Spine shaft is DIN 5482 18x15 18 mm x 15 mm. Hard to find in America but easy in Europa. Personal I use Grillo fast hitch adapter....
  56. Re: Grillo 107d is the hitch plate strong enough?

    Hi! I have a 15 cu ft trailer with front seat. I load it with sand + me more 800 lbs. I use this set up for more 3 years with no problem. My Grillo 107 d with weights in wheels and chains pull very...
  57. Replies
    17
    Views
    1,697

    Re: log splitter not splitting well this year.

    Hi! I had this trouble. Was Air in valve. Oil levell was too low. take some air. Check oil input Levell ,filter for good oil input. Bleed at cylinder for remove air. Mine run very good now. Good...
  58. Replies
    7
    Views
    1,030

    Re: Tiller Question

    Hi! For your carburator the needle valve go up but they are a slot on the needle valve this slot slide on the float . a little tricky for put inside carb. Good luck Oldmech
  59. Replies
    2
    Views
    1,040

    Re: weighted tires on grillo 107d

    Hi! No problem for tranny . They are built for pull. They use worm gear very strong. More weight more traction. Yes I put glycol in my Grillo tires but I think less two gals each. For plowing I built...
  60. Thread: Drive belt 212

    by oldmech
    Replies
    7
    Views
    912

    Re: Drive belt 212

    Hi! If belts (2) are in good condition. The variator does not work well. May be spray some W40 on variator bushing. Good luck! Oldmech
  61. Replies
    18
    Views
    2,889

    Re: "Don't pulverize the soil...."

    Hi! Soil is life. Plant need air water and food for grownt . For me less is sometime better. For your soil. Look for correct the PH. If you can add some lime this can improve quality of soil. More...
  62. Replies
    17
    Views
    2,982

    Re: Cub Cadet RT65 Problem

    Hi! May be a lot of oil or gas in cylinder . Gas or oil are not compressible. So when you remove plug you can start. Shut off the line of gas Remove the spark plug reverse down engine and crank for...
  63. Replies
    5
    Views
    1,857

    Re: BCS tiller starts but won't stay running

    Hi! If you can just drain carburator. Often they are under carburator bowl a drain plug. This can remove dirt water etc, Good luck Oldmech
  64. Re: electric motor conversion for a BCS or Gravely?

    Hi! For now! Sun and Wind are FREE here. But I must pay for gas and diesel. Energy from Sun is fabulous. As one kwhr by square meter. No more oil in 20-30 years. We must import a lot of oil now. We...
  65. Replies
    2
    Views
    822

    Re: Subaru 7HP Engine 2 Year Warranty

    Hi! Honda have now 3 years warranty on GX Honda. This engine is OHV very reliable The best I think (expensive) But Subaru (Robin) EX21 OHC are very good. They have steel timing chain. This engine is...
  66. Re: electric motor conversion for a BCS or Gravely?

    Hi! We can have electricity FREE from sun or wind and FOR EVER .I have now a electric tricycle for five weeks. I make 16 kms for .03 electricity is about .06 kwhr here . Hydro use electric car...
  67. Replies
    97
    Views
    18,092

    Re: "Powersafe" clutch on BCS

    Hi! I remimber I read the new EU rules . The maximum speed for two wheels tractors is 8 kmh or 5 mph. I think in near futur company as BCS or Grillo remove the 4th gear. Good luck Oldmech
  68. Replies
    10
    Views
    1,597

    Re: Anybody identify or have info on this one?

    Hi! You can add a reduction shaft with two pulleys. You keep do not change engine and tiller pulleys. The new shaft with a large pulley 10 in. and a smaller 3 in. can be fit over the tiller pulley,...
  69. Replies
    3
    Views
    1,296

    Re: gx390 oil in cylinder, what else?

    Hi. OK You must change oil. No Problem later. Your engine can smoke for less one hour and all be fine after. Worse. A lawn mower Honda turn over in running. I change oil . This engine is running...
  70. Replies
    10
    Views
    1,597

    Re: Anybody identify or have info on this one?

    Hi! You must change engine and trans. pulleys for more high ratio. Or a smaller pulley on engine and more large on trans. Good luck! Oldmech
  71. Replies
    13
    Views
    2,183

    Re: Hatz diesel on 850 BCS

    Hi! Look for SAE flange with one inch keyed straight shaft. Often on sale are long taped shaft engine. These engines are for generator or pumps. No suitable for two-wheels tractor. Good luck Oldmech
  72. Replies
    13
    Views
    2,183

    Re: Hatz diesel on 850 BCS

    Hi! I think Goldoni use Hatz diesel engine .May be the best for reliabily but very expensive (From Germany) One very good engine is The Yanmar with new fuel injection may be the best for fuel...
  73. Replies
    4
    Views
    1,306

    Re: Gravely Li loosing power

    Hi! I want help you. I read your thread. Not easy to find. Can be many. First= Check your gas cap. Air must to go in gas tank . Clean the small hole in gas cap. I think this is your trouble . But...
  74. Thread: Should i buy?

    by oldmech
    Replies
    27
    Views
    3,117

    Re: Should i buy?

    Hi! I think you have a good tractor. Now first. Remove sparkplug and You must take compression .If very low add one teaspoon of engine oil. Start again if compression get more high. Valve are good....
  75. Replies
    4
    Views
    2,117

    Re: AGRITEC Rotary Tiller AT20

    Hi! For your At-20 tiller. At top is the oil filler bolts or hole. at bottom is the oli level plug. You can run the tiller. Stop the tiller remove bottom plug add oil until oil escape. you screw the...
  76. Re: What is considered "normal" oil consumption for a CUT diesel?

    HI! One quart or less is normal for 50 or 100 hrs. But we must check and add oil more often on some engine each is different one can take one quart and other same model can take half . All engines...
  77. Replies
    6
    Views
    1,788

    Re: Grillo G85D differential question

    Hi! I have a Grillo 107d. Sometime one Wheel spin half turn (Normal) sometimes 1-2 turns . I think the slider Inside tranny past over the slot because no time for to get in . May be release the...
  78. Replies
    5
    Views
    876

    Re: Transmission problem?

    Hi Spray some penetrating oil on shifter. May be some rust on shift shaft inside tranny .This can be better later with use. May be you can change oil. Sometimes water in oil from condensation. Good...
  79. Thread: Should i buy?

    by oldmech
    Replies
    27
    Views
    3,117

    Re: Should i buy?

    Hi! Solenoid is between battery and starter. it connect battery to starter. On L model at right gas cap they are a square black panel with model and serial number. as on your last pict no 2. but on...
  80. Thread: Should i buy?

    by oldmech
    Replies
    27
    Views
    3,117

    Re: Should i buy?

    Hi| This tractor is not a pro 12. A true Gravely with last 7.6 hp Gravely engine. Why need new magneto. Inside magneto they are a breaker point. You can clean and adjust point at .015 if coil is...
  81. Replies
    57
    Views
    4,764

    Re: spring project, VAC

    Hi! May be the VAC available without PTO. Less expensive. I would like buy this tractor. It was not for sale. Thank! Oldmech
  82. Replies
    57
    Views
    4,764

    Re: spring project, VAC

    Hi! Some years ago I seen a VAC . But this one dont have a PTO . Is PTO optional on these tractors. May be can expensive ta add now. But Beautiful small tractor. Good Luck ! Oldmech
  83. Replies
    97
    Views
    18,092

    Re: "Powersafe" clutch on BCS

    Hi! Gravely L model have true shuttle since 1950 they use planetary and band in oil very reliable mine is sixty years old and run very well. Gravely have live PTO. You can change gear and reverse...
  84. Replies
    7
    Views
    1,208

    Re: Monster Walk Behind

    Hi! For you Here some specifications for one walk behind China tractor . (They are alot)
    Model 12 Weight 360 kgs (792 lbs)
    Tires 6x 12
    Speeds front 1.4 - 2.5 - 4.1 - 5.3 - 9.4 - 15.3 Kms ...
  85. Replies
    7
    Views
    1,208

    Re: Monster Walk Behind

    Hi! This walk behind tractor is from China. Some very big as 12-14 hp water cooled slow diesel engine belt drive . Very popular in Asia. Good luck ! Oldmech
  86. Replies
    97
    Views
    18,092

    Re: "Powersafe" clutch on BCS

    HI. New Powersafe clutch are 5 years warranty. Probably you cannot burnt this clutch. Because multidisc run in oil. But You have a pump a valve a piston . A lot of oil seals . May be with time can...
  87. Replies
    97
    Views
    18,092

    Re: "Powersafe" clutch on BCS

    Hi! If you ask for new range BCS Powersafe. I am going from bcsagri.it .
    The new 750 have reduction gear as 948. Speed 3+3 Front .98-2.27-3.34 Reverse 1.03-2.39-3.51 Look as No More road speed
    740...
  88. Replies
    97
    Views
    18,092

    Re: "Powersafe" clutch on BCS

    Hi! I make some search. I find New 740 powersafe (Look as 853) have 3 speeds front and 3 speeds rear instant reverse but NO MORE road high speed. as 852-853 . The new powersafe clutch is 5 years...
  89. Replies
    97
    Views
    18,092

    Re: "Powersafe" clutch on BCS

    Hi! I must to apologize here! Because I was wrong. I go on BCS web site. bcsagri.it . This mutidiscs clutch use hydraulic pressure with pump and oil filter . Very innovative. More safe for...
  90. Replies
    97
    Views
    18,092

    Re: "Powersafe" clutch on BCS

    Hi! The Powersafe clutch. on BCS are not Hydrolic. This clutch is a multi-disc in oil bath. The handle with two cables drive a cam for press the multi-disc. The multi disc clutch in oil bath casing...
  91. Replies
    5
    Views
    2,056

    Re: ignition wires mixed up on my Ford 1900 4WD

    Hi! The best is check wires and switch with a volmeter. Work with battery ground disconnected. Check the switch first in all positions with ohmsmeter.May be bad or different Go with wires color so...
  92. Replies
    18
    Views
    1,585

    Re: roller bearing question - cups and cones

    Hi! Shure The best is replace cup with bearing. Sometimes not very easy to remove. Heat ,punch with big hammer. But if cup look not very used. you can take a chance. For replace cup and seal . I put...
  93. Replies
    12
    Views
    2,153

    Re: Diesel Engine Opinions

    Hi! Please read on other thread Other page (2) Problem on a step hill(diesel) by Clytle. Good luck! Oldmech
  94. Replies
    1
    Views
    958

    Re: Honda iGX Motors

    Hi! I have a GX340. I read info. on Honda web site .These new engines have elecronic SELF regulator variable ignition timing . Better fuel economy and more quiet. electric starter. No problem engines...
  95. Replies
    12
    Views
    977

    Re: X728 John Deere tilling straw

    Hi! Thanks for Beautiful Pictures of peoples and tractor! If you plant blueberries This is very good. But for garden. I could add a lot of lime and till again and wait . Because straw can add...
  96. Thread: monster tiller

    by oldmech
    Replies
    6
    Views
    2,820

    Re: monster tiller

    HI! I want add this. You know. Big heavy Tiller with high speed rear tines are more easy to run than light low speed front tines tiller. Front tines tiller are very tough for humain body. I had (...
  97. Thread: monster tiller

    by oldmech
    Replies
    6
    Views
    2,820

    Re: monster tiller

    Hi! I seen the big two cylinders on Ariens dealer more 50 years ago. But my father had one Ariens 9 cv Wisconsin two speeds one reverse with bigs springs tines. No differential but ratchets in...
  98. Thread: X540 Fuel Use.

    by oldmech
    Replies
    33
    Views
    3,468

    Re: X540 Fuel Use.

    Hi! No Miracle! A GX Honda engine need 230 Grams H P Hour. So 2.3 liters hour for 10 HP or 4.6 liters ( 1.3 Gal hour) for 20 HP This are the best Some engine take more. My John Deere 317 was near 2...
  99. Replies
    12
    Views
    2,153

    Re: Diesel Engine Opinions

    Hi! I have two diesels one gas. BCS 735 diesel take about one liter hour as the Gravely diesel. The Grillo 107d with GX340 Honda can take more two liters hour. For long job 2-3 hours I use the 735...
  100. Re: New clutch installed and wont dis-engage the engine

    Hi! The best Oem Disk from Pasquali Italy . But you have one now. I just seen your pressure plate. This clutch look very small. I think the best is circular shim. I write 16 Ga .059 Metal sheet But...
Results 1 to 100 of 425
Page 1 of 5 1 2 3 4
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.