Search:

Type: Posts; User: SPMMD; Keyword(s):

Results 1 to 72 of 75

Search: Search took 0.01 seconds.

  1. Replies
    23
    Views
    1,572

    Boy did you do well with that Wallenstein...

    Boy did you do well with that Wallenstein purchase! I have been hoping to find a used one in good condition. Is it the one previously on CL from PA or CT?
  2. Thread: ZTT 1046

    by SPMMD
    Replies
    3
    Views
    277

    Gone through all of that without improvement. Was...

    Gone through all of that without improvement. Was hoping to hear of different Shute design or something else to prevent the lower clogs! Couldn't drive any slower! Double cut, even triple cut lawn...
  3. Thread: ZTT 1046

    by SPMMD
    Replies
    3
    Views
    277

    ZTT 1046

    Have owned this and used it for almost 7 years. The first season the transmission when bad locking both rear wheels, but cub cadet replaced it without charge. 7 years later, after just cutting the...
  4. Replies
    9
    Views
    689

    Tree/ beetles hardwood, not pine. Part of my...

    Tree/ beetles hardwood, not pine. Part of my question was whether the larva or beetles would remain alive living off the now dead/split wood and would attack the other seasoning wood? Naturally I...
  5. Replies
    9
    Views
    689

    Firewood/splitting wood and Beetles?

    Growing up I manually split wood with a sledge hammer and a wedge.

    Most of the wood split was from felled tree hardwood left over from clearing my parents building lot. Through the years I dealt...
  6. Replies
    186
    Views
    15,375

    I installed a block heater, did 50 hr service...

    I installed a block heater, did 50 hr service with fuel filter change an completely removed the diesel from the tank, and filled up with fresh winter mix diesel with cold/winter additive. The fuel in...
  7. Replies
    186
    Views
    15,375

    Yesterday 5-8 degrees, no start. Turns over quite...

    Yesterday 5-8 degrees, no start. Turns over quite nicely, just doesn't fire!. This mourning, outside temperature up to 23 degrees F. Fires up almost immediately smooth running, almost no smoke! Will...
  8. Replies
    186
    Views
    15,375

    Yesterday 5-8 degrees, no start. Turns over quite...

    Yesterday 5-8 degrees, no start. Turns over quite nicely, just doesn't fire!. This mourning, outside temperature up to 23 degrees F. Fires up almost immediately smooth running, almost no smoke! Will...
  9. Replies
    186
    Views
    15,375

    My 2011 B3200 won't start under 20 degrees! I run...

    My 2011 B3200 won't start under 20 degrees! I run the same diesel fuel my truck runs on, and untill this year I haven't had any problems starting. Now however, forget it. My tractor lives outdoors,...
  10. Replies
    12
    Views
    2,303

    I think this is supposed to replicate a test from...

    I think this is supposed to replicate a test from medicine, trauma. After a head injury, if there was a nosebleed, a drop of the blood on filter paper or paper towel would just be red homogenous...
  11. Thread: 3pt splitter

    by SPMMD
    Replies
    44
    Views
    4,830

    I went trough all the same thoughts before buying...

    I went trough all the same thoughts before buying my splitter! Gas powered, stand alone, or 3PH mount. After about 4 mos of study, I opted for a stand alone Honda powered Wallenstein. I couldn't be...
  12. Sure enough, 107,000 mi on Bridgestone Duravis...

    Sure enough, 107,000 mi on Bridgestone Duravis commercial tires. I do rotate tires with each oil change. My Sierra 2500 diesel is my daily driver, and easily 90-95 percent of mileage has been and...
  13. My 2007 2500 duramax crew cab Sierra SLT now has...

    My 2007 2500 duramax crew cab Sierra SLT now has 157,000 miles. Oil changes, diesel fuel filter changes, initial tire replacement at 107,000. I haul everything from my tractor to my wife's Yukon XLT...
  14. Replies
    13
    Views
    1,305

    I have as well been considering the wallenstein...

    I have as well been considering the wallenstein BX 42 for use with my B3200. Any of you out there with experience with mounting it to a B3200?
  15. Replies
    16
    Views
    3,336

    Oh yea, I forgot to mention, no block heater or...

    Oh yea, I forgot to mention, no block heater or special starting measures, just glow plugs and start with the key! My dealer told me I didn't need a block heater or to pre warm my Kubota, and thus...
  16. Replies
    16
    Views
    3,336

    I have owned my B3200 since accepting delivery...

    I have owned my B3200 since accepting delivery November 2011. I do not have a garage, and my Kubota lives in the woods of Upstate NY. While my original plan included a mid mount mower deck, I instead...
  17. Replies
    75
    Views
    9,928

    My GMC 2500 duramx has a Rhini-liner beg and rail...

    My GMC 2500 duramx has a Rhini-liner beg and rail coating. Had it installed just after purchase of truck In 2007. Faded a little( no cover of any kind or garage). When one year old had new quarter...
  18. Replies
    19
    Views
    1,631

    Attaching and removing my front end loader has...

    Attaching and removing my front end loader has left me fighting the same fight 2 seasons in a row. Dismounting the FEL in winter to put on front mount snowblower easy. In spring however, impossible...
  19. Thread: hydraulic Oil

    by SPMMD
    Replies
    12
    Views
    1,392

    Silly me, here I thought the question was if the...

    Silly me, here I thought the question was if the t-shirt could then be reworn ?
  20. Replies
    52
    Views
    1,937

    I frequently worry about my dogs when I move the...

    I frequently worry about my dogs when I move the Kubota or put other vehicles. I have often laughed at my wife whom will often park at the entrance of our driveway if I'm out with the dogs for her...
  21. Replies
    26
    Views
    3,568

    I have seen far too many slip on joints cold weld...

    I have seen far too many slip on joints cold weld and become near impossible to take apart. Add exhaust gas temperatures, a little moisture(rust ), and break out the sawzall!!!!
  22. Replies
    26
    Views
    3,568

    With the upright through the tractor hood, how do...

    With the upright through the tractor hood, how do you do your routine oil lever and fluid check? Do you have to disassemble the exhaust stack to open the hood?
  23. Replies
    38
    Views
    3,320

    Since the blowout, I have invested in a infra red...

    Since the blowout, I have invested in a infra red temperature gauge, and have paid close attention to tire pressures. I have gotten into the habit of documenting my loaded, tied down trailer loads...
  24. Replies
    19
    Views
    2,297

    Ummmm snow?

    Ummmm snow?
  25. Replies
    18
    Views
    1,225

    Interestingly, after calling AAA last week, the...

    Interestingly, after calling AAA last week, the dispatched tow truck refused to help change a flat on my trailer! I'm triple A, triple A doesn't service trailers he said. I was towing withy truck, on...
  26. Replies
    19
    Views
    2,297

    In Upstate NY in the snow belt, I have R4's on my...

    In Upstate NY in the snow belt, I have R4's on my B3200. I don't have chains, and while I admit our last two winters were probably the mildest winters in recent history, I haven't had any problems...
  27. Replies
    38
    Views
    3,320

    Wow, I didn't know TPMS was even available on...

    Wow, I didn't know TPMS was even available on trailer wheels/tires! Is it very expensive and easy to retrofit?
  28. Replies
    38
    Views
    3,320

    This trailer was last used 3 months before, which...

    This trailer was last used 3 months before, which was also the last time tire pressures were measured and were appropriate. The trailer was dug out of 2 feet of snow for use, visual inspection,...
  29. Replies
    38
    Views
    3,320

    Trailer was manufactured by All Pro Trailers Fla,...

    Trailer was manufactured by All Pro Trailers Fla, 7000 lb rated with electric brakes on all wheels.
  30. Replies
    38
    Views
    3,320

    Tandom trailer blowout

    I had the great displeasure of having a blowout Friday while traveling 60 MPH on the freeway transporting one of my vehicles. I was towing with a GMC Sierra 2500 on I495 with most of my family in the...
  31. Replies
    7
    Views
    1,049

    I pull a SQ 160 BushHog twin blade rotary (5')...

    I pull a SQ 160 BushHog twin blade rotary (5') with a slip clutch, and a BushHog SBX 72 (6') box blade wit my B3200 this far without any problems. This past week I had to tow out my Sierra 2500 from...
  32. Replies
    50
    Views
    5,130

    The smoke on a very cold startup and initial ruff...

    The smoke on a very cold startup and initial ruff ideal smoothing out over 10-15 seconds is normal for a B3200 under very cold startup, this is minimally improved if you fire the glow plugs and extra...
  33. Snow No, watching my son and his best friend play in...

    No, watching my son and his best friend play in it is the best part!

    302299



    302300
  34. Snow So far, loaded R4s with the ballast of the box...

    So far, loaded R4s with the ballast of the box blade on my B3200 and I haven't run into a traction problem yet. My surface beneath the snow is gravel/ dirt.

    302273
  35. Replies
    16
    Views
    3,336

    Hey Brimfield, did you get any real snow? How...

    Hey Brimfield, did you get any real snow? How well did it go clearing the snow? With the drive you describe I would be ready to clear downed trees or limbs as well! I found the drawbar very useful,...
  36. Snow Depending on the surface under the snow...

    Depending on the surface under the snow (pavement, gravel or stow drive or dirt) you will either want to push the snow with the loader on "float", or you may need to play close attention to the...
  37. Replies
    16
    Views
    3,336

    After plowing/ blowing out the 6 inches of snow...

    After plowing/ blowing out the 6 inches of snow that fell Friday night here in Oswego, I tried making a sledding course down the side of the driveway, then down the hill past the side of my house for...
  38. Replies
    16
    Views
    3,336

    Since I've owned my B3200 it has lived outdoors....

    Since I've owned my B3200 it has lived outdoors. While I initially kept I covered with a tarp, the winds coming off Lake Ontario made the tarp dangerous! She has always started despite the cold, but...
  39. Replies
    16
    Views
    3,336

    A foot of lake effect snow was little effort for...

    A foot of lake effect snow was little effort for my B3200 with front mount blower and box blade! But I will say, those of you with cabs/ enclosures are missing out on that hot shower experience ...
  40. Replies
    89
    Views
    8,358

    If the bottom of the raycor had ice in it, you...

    If the bottom of the raycor had ice in it, you have 2 problems. The fuel gelling is one, which should well respond to winter antigell/ diesel fuel "heat" provided the gel hasn't clogged the diesel...
  41. Thread: Seat for a BX23

    by SPMMD
    Replies
    6
    Views
    1,090

    I couldn't tell you for sure, but last time I was...

    I couldn't tell you for sure, but last time I was at my local tractor supply company store (TSC) the had both Kubota and JD replacement seats on the shelf! Their on line store should list the prices!
  42. Replies
    16
    Views
    3,336

    Kubota B3200 clearing snow!

    Christmas week came our first real snow! Last year was such a disappointment! Now, with the front mount Kubota snowblower, and the box blade on the rear, our first real snows have been little...
  43. Replies
    11
    Views
    2,093

    Snow Thanks for all the advice. It seems to me I will...

    Thanks for all the advice. It seems to me I will be laying on the ground to put on and take off the blower mount, or I'll just have to do without the FEL until spring!!!!!!
  44. Replies
    11
    Views
    2,093

    Snow Yes, that's exactly the question. With the...

    Yes, that's exactly the question. With the hydraulic lines reattached to the FEL, and the quick attach for the blower left on, is there enough room to fit and operate the FEL? I don't have a garage,...
  45. Replies
    11
    Views
    2,093

    Snow Front mount Kubota blower

    I have only owned my B3200 with FEL and front mount Kubota snow blower for 1year. Last year was a joke for snow fall in Upstate NY. I saw picture of FEL and blower mount on at same time! Can you...
  46. Replies
    16
    Views
    1,046

    Knowing these vehicles and the experience I have...

    Knowing these vehicles and the experience I have had buying them, I know you can do much better. All of mine had leather or combination leather and vinyl interiors, air conditioning that worked, and...
  47. Replies
    16
    Views
    1,046

    PS, this was my oldest daughters '99 after she...

    PS, this was my oldest daughters '99 after she decided to suddenly make a U-turn across Grandin rd in Roanoke (5 lanes) after missing her turn and was broadsided by a car parts delivery truck at 40...
  48. Replies
    16
    Views
    1,046

    I have owned for myself a Cherokee pioneer with...

    I have owned for myself a Cherokee pioneer with the manual transmission(Olympic edition), a Cherokee sport '95, Grand Cherokee limited v8, as well as 4.0l, a grand Cherokee TSI, and currently a...
  49. Replies
    9
    Views
    757

    286762 So here is what I found ! The actuator...

    286762

    So here is what I found ! The actuator rod is completely detached, who knows where the spring clip and washer went!!!!

    286765

    Yes it is a paper clip! But it will work fine untill I...
  50. Replies
    9
    Views
    757

    Great! Later today or tonight I'll get under and...

    Great! Later today or tonight I'll get under and hopefully fix the problem. If I can I'll post some pictures for the member that runs into this! Thanks for all the responses and advice!!!
  51. Replies
    9
    Views
    757

    So I should look underneath the tractor, not...

    So I should look underneath the tractor, not behind the panel with the brake lever?
  52. Replies
    9
    Views
    757

    B3200 parking brake failure

    I went to put on the parking brake after leveling a pad for my son's basketball backboard, stepped hard on the brake, and as I pushed down on the lever it suddenly gave way. I don't have a shop...
  53. Replies
    33
    Views
    2,408

    There are trailer fabricators whom build trailers...

    There are trailer fabricators whom build trailers from scratch, and are registered, licensed by the state/DOT whom produce weight certified trailers . I would reccommend you contact one of them to...
  54. Did it come with a dozen eggs and the coffee? Or...

    Did it come with a dozen eggs and the coffee? Or did you do what my wife says I do? Return 4 hrs later after leaving to buy eggs and surprise! "honey look what I found next to the egg store !" Of...
  55. Driving from Houston to Galveston in 1987 we lost...

    Driving from Houston to Galveston in 1987 we lost a surfboard onto I45 south of Clearlake. The only thing scarier than seeing that surfboard take flight and land in the middle of 4 lanes of oncoming...
  56. Replies
    16
    Views
    1,705

    Just towed my wife's Yukon XL on my tandem axle...

    Just towed my wife's Yukon XL on my tandem axle trailer with a combined weight of 15500# and trailer weight (without tongue weight) 7080# as measured on my local aggregate hauler's digital scale 400...
  57. Replies
    41
    Views
    3,828

    Following this thread, it has become clear to me...

    Following this thread, it has become clear to me that the installer may be more important than the product when considering Rhino-liner vs. Linex. In the southeastern MA/Capecod market, Rhino-liner...
  58. Replies
    41
    Views
    3,828

    I added a rhino-liner to my gmc2500 shortly after...

    I added a rhino-liner to my gmc2500 shortly after delivery when new in 2007. The bed and sidewalls still look like new despite almost 5 years of boat equiptment, agricultural tools, kennels and...
  59. Replies
    46
    Views
    5,793

    After following this thread from the beginning, I...

    After following this thread from the beginning, I moved forward and now have 2 trailers registered in Maine! It couldn't have been any easier. 2 trailers, registered for 5 years each, all costs...
  60. What we need to do is to set up a loan/ barrow/...

    What we need to do is to set up a loan/ barrow/ lend/co-op to use to get the most out of our ( and our neighbors ) attachments!!!!! This should be locally referenced of course!!!!
  61. I began surfing the site almost 6 months before I...

    I began surfing the site almost 6 months before I bought my first tractor, a Kubota B3200 in November 2011. I found I have been able to learn a great deal on this site. Not only did it help me decide...
  62. Thread: Ball hitch

    by SPMMD
    Replies
    3
    Views
    946

    Thanks Bruce, I new it would be simple, just...

    Thanks Bruce, I new it would be simple, just couln't believe no one stocked 3/4 or 5/8" shank 2" balls !!! Shawn
  63. Thread: Ball hitch

    by SPMMD
    Replies
    3
    Views
    946

    Ball hitch

    Am adding a hitch to the draw bar on the back of my Kubota B3200. But every time I have gone by the "trailering" section at TSC or my car parts places, the balls mount with a larger diameter fitting...
  64. Replies
    46
    Views
    5,793

    I can't see how it would be a problem or legal...

    I can't see how it would be a problem or legal issue. The new car dealerships, as well as the trailer shops and virtually every commercial/ landscape trailer( that carries tags) all have Maine ...
  65. My b3200 was delivered thanksgiving and now has...

    My b3200 was delivered thanksgiving and now has 16 hrs on the clock. I have the 504 loader and the BJ77 which I removed for the 1st time 2 weeks ago to start bush hogging. My property is heavily...
  66. Thread: Car trailer

    by SPMMD
    Replies
    0
    Views
    415

    Car trailer

    I found an 18 foot wooden deck car trailer with a Warn 9000# winch mounted on the tongue, that I picked up online used, but haven't taken delivery yet. It is only 2 years old, 7000# GVR with twin...
  67. Thread: Quick hitch

    by SPMMD
    Replies
    10
    Views
    1,593

    Quick Hitches If Pat's adds 4 inches, will the drive shaft for...

    If Pat's adds 4 inches, will the drive shaft for the bush hog be too short? Going with the Speeco or other type quick hitch do they also lengthen the lift arms that much?
  68. Thread: Quick hitch

    by SPMMD
    Replies
    10
    Views
    1,593

    Quick Hitches Quick hitch

    After wrestling together a bush hog SQ160 onto the 3 pt hitch of my Kubota 3200, I have been thinking about a quick hitch.

    I have looked on line at Speeco and Land pride, and have looked at...
  69. Thread: 3 pt hitch

    by SPMMD
    Replies
    7
    Views
    1,244

    3-Point Hitch That would be great, it took me a little while to...

    That would be great, it took me a little while to be able to finesse off the backhoe for the first time ! Spent a couple of hours with the ground hog for the first time use today after getting the 3...
  70. Thread: 3 pt hitch

    by SPMMD
    Replies
    7
    Views
    1,244

    3-Point Hitch Thanks for the advice, sure enough, once the bolt...

    Thanks for the advice, sure enough, once the bolt was completely removed, and with the assistance of a pry bar, I did just as you said and eureka!! Done !! Thanks for the advice, Kubota should...
  71. Thread: 3 pt hitch

    by SPMMD
    Replies
    7
    Views
    1,244

    3-Point Hitch Pictures 261938

    Pictures

    261938
  72. Thread: 3 pt hitch

    by SPMMD
    Replies
    7
    Views
    1,244

    3-Point Hitch 3 pt hitch

    Good afternoon. I recently purchased a B3200 with FEL and BH 77 for maintenance of my 9 acre wooded overgrown home lot. Because of the expected 20' snowfall, I purchased a kubota front mount blower,...
Results 1 to 72 of 75
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.