Search:

Type: Posts; User: Acky; Keyword(s):

Results 1 to 15 of 16

Search: Search took 0.00 seconds.

  1. Replies
    8
    Views
    1,207

    Oil & Fuel Re: Spin on Fuel Filter

    Adjusted pedal play and tractor seems to be working fine.

    Thanks to all for your guidance and help with this issue. A Happy New Year to all.

    Acky (Frank)
  2. Replies
    14
    Views
    2,688

    Re: Foton 404 looses ground speed

    Adjusted the pedal free play and that seems to have done the trick. Tractor is performing OK. Many thanks to all for your great suggestions and help with this issue.

    The warm weather can't come...
  3. Replies
    14
    Views
    2,688

    Re: Foton 404 looses ground speed

    Rick,

    Thanks so much for your suggestions. When I get to my daughters house next weekend, the first thing I'll do is look at pedal free play. If it's an issue, I'll do an adjustment. You're right,...
  4. Replies
    14
    Views
    2,688

    Re: Foton 404 looses ground speed

    Rick,

    If you can give any tips on how you adjusted your clutch, I'd sure appreciate it. Daughter's Foton engages at the very top of the pedal travel and has virtually no power whatsoever. It...
  5. Replies
    8
    Views
    1,207

    Oil & Fuel Re: Spin on Fuel Filter

    Mark,
    The tractor will rev up with no problem in either the low or high range but will only operate at a crawl. It idles perfectly and has not stalled. No matter how much throttle, the machine...
  6. Replies
    8
    Views
    1,207

    Oil & Fuel Re: Spin on Fuel Filter

    Many thanks, Mark and Ron. Filter went on easy and no bleeding was required.

    Now, here's one for you: On my daughter's 10 yr. old Foton, when she puts it in 1st gear (either low or high) and lets...
  7. Replies
    8
    Views
    1,207

    Oil & Fuel Spin on Fuel Filter

    Hey Guys and Gals,

    I need to replace the spin on fuel filter on my daughter's Foton 404. I'll be replacing the CX7085 with a Napa 3195. Frankly, I have no idea when or if the present filter has...
  8. Replies
    23
    Views
    3,197

    Re: Opening hood on Foton 404

    Guys,

    Thanks so much for all the tips and advice on the Foton. I was at my daughter's the other day and her machine has the hydraulic filter in the same location as yours. But, since it was below...
  9. Replies
    23
    Views
    3,197

    Re: Opening hood on Foton 404

    Zonta and Rick ,

    Her machine is a 2006 FT404. Hopefully, it's about the same as the ones you guys own.

    After replacing the hydraulic cartridge was there a need to bleed the system or just...
  10. Replies
    23
    Views
    3,197

    Re: Opening hood on Foton 404

    Rick,

    You're the best. Many thanks for the pix.
    Next time I'm at my daughter's place, I'll check out her machine and see if there's a filter in the same place as yours. Any idea of the part #?...
  11. Replies
    23
    Views
    3,197

    Re: Opening hood on Foton 404

    Thanks guys for opening of the hood info. Actually, on her machine it's located just over the front left wheel (on the frame). Interestingly, the hood only opens about half way since it binds on the...
  12. Replies
    23
    Views
    3,197

    Opening hood on Foton 404

    My daughter, recently separated, has asked me to do some maintenance on her Foton 404 tractor. Her ex used to take care of all this .

    It sure would be good if I knew how to get the hood raised so...
  13. Replies
    5
    Views
    2,225

    Loader Re: cx 200 bucket won't tilt

    Hey Guys,

    Thanks for all the good info. After going through the checklist of possible malfunctions, it came down to the male fitting on the bucket hose. Swapped that one out and all is good. ...
  14. Replies
    5
    Views
    2,225

    Loader cx 200 bucket won't tilt

    Have a 2520 compact JD with a cx 200 bucket. Unit is 6 years old.

    Today I removed the snowblower and attached the bucket. Had to struggle a bit with the 4 hydraulic hoses getting them to snap into...
  15. Replies
    9
    Views
    358

    New Member from Roseneath, Ontario

    Hey All,

    Just discovered this excellent site and joined immediately. Have already found some very useful info here.

    We have a John Deere 2520 purchased new in 2008. Great machine !!
    Frankly,...
Results 1 to 15 of 16
© 2017 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.