Search:

Type: Posts; User: beenthere; Keyword(s):

Results 1 to 100 of 5000
Page 1 of 50 1 2 3 4

Search: Search took 0.76 seconds.

  1. Re: How much slop should be in gearbox on deck of 425?

    Do you suspect slop for some reason?

    As far as I have heard, there is no repair or rebuild in those deck gear boxes. Others may know better and can advise.

    Assume your "450" is a typo and...
  2. Replies
    12
    Views
    237

    Re: 110 TLB Box Blade Operation?

    :welcome: to TBN

    A JD box blade ?? and if so what is the model number?
  3. Replies
    6
    Views
    1,017

    Re: 4310 Price Check

    '98 4300 here, and no plastic problems so far. Very solid tractor, but closer to 1200 hours.
    When new, the instrument panel was replaced for fogging problem, and the dealer mechanic broke a plastic...
  4. Replies
    22
    Views
    5,441

    Re: John Deere 455 Attachments

    For #40 FEL, check the Beloit, WI CL (not my listing as I don't have the FEL.. )
  5. Re: John Deere 5310 Hydraulic Brakes - Any Brake Discs less sensitive to water in flu

    :welcome: to TBN
    Sounds like a round-about-way to solve the problem.. Maybe a method to drain the water accumulation before running the tractor would be the easier solution.
    Know of no disc...
  6. Replies
    3
    Views
    176

    Re: Looking for feedback

    All I can add is my JD 4300 has been great..

    I'd be hard pressed to update to another one with a computer involved or worse yet, the new diesels with the EPA requirements.. But these new diesels...
  7. Replies
    8
    Views
    252

    Re: Gator 6x4 dip stick tube snapped

    Schematic on jdparts
    John Deere - Parts Catalog

    Found this for the tube.. looks like there is a bracket to bolt it on, and an 0-ring to seal it. Your new part should give you a good clue to how...
  8. Replies
    25
    Views
    1,964

    Re: X744 PTO Generator

    SR
    :thumbsup:
  9. Replies
    15
    Views
    11,814

    Re: JD 455 Fuel Pump

    Edward
    Thanks for those pics.. very helpful and now will take your advice as well as Spanner's

    I keep that area blown out with the air hose on a regular basis.. and don't let water get in there...
  10. Thread: New Member

    by beenthere
    Replies
    7
    Views
    659

    Re: New Member

    woodchuck
    :welcome: to TBN

    A good place to start is to get a copy of the service tech manual, which will have schematics and the entire contents for working on your 650. Go online, or to your...
  11. Replies
    25
    Views
    1,964

    Re: X744 PTO Generator

    If you just use 9KW, wouldn't the 18hp work even tho it is a 10KW ?? i.e. I'm thinking it will work
  12. Replies
    15
    Views
    11,814

    Re: JD 455 Fuel Pump

    :welcome: to TBN
    Glad you posted your result, but now I need to locate what you refer to as the "inline fuse".. Have not had that experience .. yet.

    Can you post a pic of your fix? thanks
  13. Re: New member JD 4100 Compact tractor owner

    jackwarner
    Get the service tech manual to help your SIL diagnose and track down the problem, and then hopefully fix it.

    :welcome: to TBN
  14. Replies
    8
    Views
    429

    Re: LA 105 Mower Stalls at WOT

    Is there directional flow to the fuel filter, that it is in wrong..?? just a WAG

    But given that it probably was doing this before replacing the filter, likely not the problem.
  15. Replies
    6
    Views
    391

    Re: John deere 265

    Time for a call to the dealer.. being as they just did the work on it.

    :welcome: to TBN
  16. Replies
    7
    Views
    485

    Re: John Deere 8300 Wiring Diagrams

    Another option is to ask the deere dealer to bring it up, and make a printed copy for you.
  17. Replies
    7
    Views
    485

    Re: John Deere 8300 Wiring Diagrams

    Have you considered getting the service tech manual for the 8300? I find them worth every penny.. for just the things you are looking for plus a lot more. Bought mine at the Deere dealer. There are...
  18. Replies
    14
    Views
    5,538

    Re: 4100 hydraulic problems

    :thumbsup:
    Glad you are on it Joe
  19. Replies
    14
    Views
    5,538

    Re: 4100 hydraulic problems

    jack
    Sent outlander54 a pm and it will get to his email that way.. may not catch a hit if he/she doesn't see this thread after 8 years.

    :welcome: to TBN
  20. Replies
    5
    Views
    469

    Re: Any way to clean yellow seats?

    I use Simple Green... no mold on my yellow seats.. but I don't live in FL either.. ;)
    They are all yellow.. no stains... was a melt spot from a burning ember but have replaced that seat due to a...
  21. Replies
    5
    Views
    407

    Re: Adding horn (backup alarm) circuit

    Then all you need is the alarm, a switch and some wire.. grab a wire from the ignition switch that is 12v when key is on.. and you should be good to go.
  22. Replies
    2
    Views
    1,116

    Re: JD 5303 pto shaft

    Do you have the manual?

    Is there something like this on the pto clutch?
    OMRE268160: 5103, 5203, 5303 and 5403 Tractors, Block File: SA61034_0000064_19_22NOV07.htm
  23. Replies
    3
    Views
    614

    Re: Ballast for 4720

    popsie
    Don't know of a reason that it wouldn't work well for you.
  24. Re: Jd 6110 swapped computer, inst pnl dark won't move.

    :welcome: to TBN

    Some history of the swap to a new computer would help..
  25. Replies
    4
    Views
    446

    Re: JD4300 and Marvel Mystery Oil

    Additive to accomplish a problem you are having?
  26. Replies
    8
    Views
    464

    Re: How do I attach fuel fill door?

    By jd parts, looks like it is a bit different from my 4300, and may be different at a s/n break for the 4310

    Take a few pics to post of the parts you are working with... then maybe we can point...
  27. Replies
    15
    Views
    1,015

    Re: John Deere 855

    :welcome: to TBN

    Think you should go for it. And post a pic or two.. will help answer some of your questions. Good tractors,
  28. Replies
    2
    Views
    387

    Re: Gator HPX Steel Cargo Box

    What happened to yours? Are they all steel, or some made of something else?
  29. Replies
    5
    Views
    375

    Re: JD4300 and Marvel Mystery Oil

    Using the marvel oil to do what? Are you having a problem that leads you to using this addative?
  30. Re: JD 5603 Cab blows fuse upon starting and won't start

    Steve15
    :welcome: to TBN

    For a fuse blowing, rig up a 12v light bulb on an old fuse and plug into the fuse holder.. the bulb will light when there is a short to ground.
    Move wires or lift them...
  31. Replies
    21
    Views
    1,838

    Re: JD 755 Project

    If me, I'd get a cow magnet and feed it up through the drain plug in the tranny.. with the hopes that over time it would attract the loose washer and bolt head.
    Cow Magnet Choices - Master...
  32. Replies
    5
    Views
    289

    Tires Re: 4200 rear wheel spacers

    The 4200 op manual shows the tire sizes on the 4200 model.

    The 13.6-16. 6 ply, R3, ------- narrow is 41.7", turned is 45.4"
    The 12.4-16, 6 ply, R1, --------narrow is 40.1", turned is 45.4"
    The...
  33. Replies
    7
    Views
    465

    Re: 755 Headlight fuse keeps blowing

    kmmn
    :welcome: to TBN

    To find a short, make up a 12 v bulb to put in the fuse slot.. the short will cause the bulb to light and allow you to lift and trace/move wires around to locate the short...
  34. Replies
    5
    Views
    289

    Tires Re: 4200 rear wheel spacers

    What tires do you have on the 4200 now? R-4's ? or turf? or ag ?

    I turned my R-4's around and made my chains, but for stability in the woods I added spacers. IIRC around $400.
  35. Replies
    6
    Views
    474

    Re: Jd 6400 electrical issues

    Just a guess on my part, but I'd 1st check out the battery... may have shorted it out and killed it internally.

    If not the battery, start with a charged one, and lift the connections to follow...
  36. Replies
    13
    Views
    550

    Re: JD 855 with no electrical power

    :thumbsup: :thumbsup:
  37. Re: This Mower Deck is The best John Deere can come up with

    jon
    Turn the one arm to match the other..

    And agree, the right front gauge wheel is just one notch (hole) to lower the wheel.
  38. Replies
    10
    Views
    4,459

    Re: John Deere 210

    GRL
    :welcome: to TBN

    Note that the quoted post is from 12 yrs ago. Might send that OP a personal message to see if still looking.
  39. Replies
    57
    Views
    24,946

    Re: 3 Point Turbo Saw

    Here is a video of taking out a 10" spruce tree.. am very happy with this attachment. Have a couple dozen or more spruce out, and when weather cools a bit, there will be many more.
    Having stumps...
  40. Replies
    22
    Views
    1,728

    Re: What's a good JD model 30-35hp, 4wd?

    I have the JD 4300.. best compact utility JD made IMO. Have looked to trade up, but don't find something better than the 4300. No computer, tough, and has good hood/panel arrangement for air flow,...
  41. Re: This Mower Deck is The best John Deere can come up with

    Yes, believe power flow manual says right front gauge wheel at the ground.. to support the weight of the power flow. Otherwise, add weight to the opposite side to "balance" the load. Works for me.. I...
  42. Replies
    13
    Views
    550

    Re: JD 855 with no electrical power

    Clean the cable connections to the battery and at both ends.. may just be corrosion.

    Then evaluate the age of the battery.. if 6 or more years, I'd replace it with new (or at least get it load...
  43. Replies
    10
    Views
    811

    Re: 5400 gas tank imploded

    Might be worth a try to set it empty in the hot sun.. and plug the outlet and vent to enable putting a small amount of air pressure to pop it back out.
    But a replacement may be less work in the...
  44. Replies
    20
    Views
    1,203

    Re: TurboSaw on JD 4300

    The TurboSaw is perfect for what I need done.. and just it's ability to saw off the stumps at ground level would worth it alone.
    Pls don't fret about it.
  45. Replies
    48
    Views
    1,372

    Re: Database Errors Again?

    Will come back in an hour.. see if the problem is cleared up. tks
  46. Replies
    20
    Views
    1,203

    Re: TurboSaw on JD 4300

    4570
    The teeth are about 1" squares, and allows shaving the height of the stump about 1/4" a pass by moving back and forth over the top. When down to ground level, I stop "shaving".. less power...
  47. Replies
    20
    Views
    1,203

    Re: TurboSaw on JD 4300

    atsah
    Everything has its limits. You shouldn't attempt to use this tool on something it wasn't meant for.. ;)
  48. Replies
    9
    Views
    644

    Re: 4105 Fluid leak when running PTO

    Looking at the schematic for the tranny case of the 4105, is it possible that the "cap" key #10 is missing?
    Part # M808502
  49. Replies
    20
    Views
    1,203

    Re: TurboSaw on JD 4300

    After a few weeks cutting down spruce trees, small walnut trees, and a few dead oak and elm.. report that this tool is doing what I'd never be getting done with just a chainsaw.
    Yesterday set up...
  50. Replies
    2
    Views
    226

    Re: JD 318 - Hydraulic steering question

    I wouldn't think anything particularly wrong.. but I would not be pushing the hydraulics against a dead stop.. may just be what stresses the seals so whoever suggested a problem, caused it to happen....
  51. Replies
    2
    Views
    593

    Re: 6310 fault codes wanted

    Reminds me of another thread about the reverse lever not staying engaged.
    http://www.tractorbynet.com/forums/john-deere-owning-operating/382133-6410-jd-power-reversing.html
  52. Re: 3520 AutoHST No reverse - everything else works - 2008 140 hours

    :welcome: to TBN

    I'd start with removing the neg cable to battery and let set for 20-30 minutes. See if re-setting the computer (whatever that might be) will bring you up from scratch. And if the...
  53. Replies
    10
    Views
    814

    Re: 6410 JD power reversing

    Maybe this? shows the "lever" with control box.. might need replacement..
  54. Replies
    10
    Views
    1,061

    Re: X748 stalling problem

    Suspect fuel related.. not knowing the history of the fuel supply nor what Deere checked out.. no immediate ideas to help. Doubt it is an X series problem.. the Yanmar's have a long solid history.
  55. Replies
    10
    Views
    814

    Re: 6410 JD power reversing

    Post a pic of yours.. pls
  56. Replies
    12
    Views
    1,355

    Re: First Oil Change X590 -- Oil Filter Wrench?

    I use a large channel lock wrench to remove.. hand tighten tho.
  57. Re: Hydraulic leak problem JD 300 Industrial

    Without checking further, but reminds me of the fitting someone was talking about a couple days ago.. that had a couple o-rings between the casting and the fitting.
    The OP was asking to help...
  58. Replies
    10
    Views
    811

    Re: 5400 gas tank imploded

    :welcome: to TBN
  59. Replies
    25
    Views
    2,117

    Re: Back up switch for JD LT150

    My RIO are disconnected immediately too... I couldn't operate with them functioning.

    But I never mow when anyone else is around.. danger of throwing sticks, etc. higher than mowing in reverse.....
  60. Replies
    25
    Views
    2,117

    Re: Back up switch for JD LT150

    Must press, then start backwards, then release after moving.
  61. Replies
    22
    Views
    1,468

    Re: Diagnose"pulley" noise; R&R main pulley?

    Agree 100% with the "no water" theory.. only air, AND after every mowing.

    Don't put 'em away wet.
  62. Replies
    4
    Views
    356

    Re: temperatur gauge

    As I understand, there should always be some coolant in the reservoir. Give that a try... just as txranger suggested in reply 2
  63. Replies
    22
    Views
    1,468

    Re: Diagnose"pulley" noise; R&R main pulley?

    Moe
    You can go to jdparts
    John Deere - Parts Catalog

    and see schematics of the parts by putting in the model #, then browsing the alphabetic listing. Here may be a shot of your parts.
  64. Oil & Fuel Re: 130 hours on 5055e, changing hydraulic filter

    Go by the book, and be careful not to mix the non-compatible coolants..

    Did the dealer explain to you about the two different hyd filters?
  65. Replies
    17
    Views
    34,385

    Re: Learned big lesson on j20d hy-gard fluid

    I pay the piper for the real hyd. oil.. to me, not worth the risk when it comes to oil.
    To me, cheap enough as one doesn't have to change oil very often.
    I'd not want to "pay the piper" for any...
  66. Replies
    15
    Views
    1,058

    Re: JD 4210 - bogging down ?

    Will have less HP in high "C" range, should have more in "B" range and more yet in "A"

    "C" is only for road travel.. no engagement of attachments.

    Are you using "load match" ?

    Also look for...
  67. Replies
    10
    Views
    814

    Re: 6410 JD power reversing

    :welcome: to TBN
    Does it look like this schematic? Maybe the springs don't hold the lever in the notch.. just a guess, after looking at jdparts.

    John Deere - Parts Catalog
  68. Thread: 4410 codes

    by beenthere
    Replies
    3
    Views
    502

    Re: 4410 codes

    Maybe problem related to this other thread.. about codes.

    http://www.tractorbynet.com/forums/john-deere-owning-operating/382137-jd-4210-bogging-down.html
  69. Replies
    15
    Views
    1,058

    Re: JD 4210 - bogging down ?

    kidsdad
    What gear range are you mowing in, when you sense the lack of power?
  70. Oil & Fuel Re: 130 hours on 5055e, changing hydraulic filter

    What are the numbers on the filters?

    It's fair for you to ask the dealer..
    and as for the hydraulics.. the pumps are pumping fluid all the time and the filters will keep it clean (er). ...
  71. Replies
    15
    Views
    1,058

    Re: JD 4210 - bogging down ?

    Are you familiar with all the different ehydro settings on the 4210?

    I am not anymore, but recall that some of them can be a bit confusing and conflicting.

    :welcome: to TBN
  72. Replies
    5
    Views
    493

    Re: Oil plug 3720

    Snug ;)
  73. Replies
    27
    Views
    1,124

    Re: 1520 John Deere pto

    In this reply #2, TxJim explained the side lever (left heel) to engage/disengage the PTO using the foot clutch pedal, as well as the top lever (between the gear shifters) that operates the PTO clutch...
  74. Replies
    3
    Views
    1,204

    Re: 1948 JD A New to Me

    Steering may be normal, and to get the wheels to turn, best to be moving. Pretty tough to turn the wheels at a stand-still.
    But you may need to check the grease/oil in the top of the steering...
  75. Replies
    14
    Views
    952

    Loader Re: Converting 300cx loader to solid mount?

    For a compact utility tractor, you may be working beyond its design limits. Which I do on occasion too, but realize there are limits that could prove costly.

    Maybe a heavier duty tractor is what...
  76. Backhoe Re: Hydraulic sag, Power beyond, MMM, 485 backhoe

    Do you see any reason why that would not be wise? seems something is needed to hold it up.

    :welcome: to TBN
  77. Replies
    7
    Views
    648

    Re: 4x4 front axle seals leaking...

    Might I suggest if you are going to tackle repairs, that you would be helped by getting a copy of the service tech manual.
    An hours worth of mechanic labor charge will pay for the service tech...
  78. Replies
    7
    Views
    648

    Re: 4x4 front axle seals leaking...

    Do you have the service tech manual for your JD 5325?
  79. Re: John Deere 955 with FEL..... I want to install a grapple

    The total amount of hand work in that single grapple load is indeed immeasurable. :thumbsup:
  80. Replies
    24
    Views
    3,508

    Re: Battery goes dead

    k0ua
    No need to beat on Bob.
    I sent him a PM asking what was up.. and hope I did it politely.
    Maybe Bob couldn't find his original post or this thread. Some are not savvy to the mind of the...
  81. Replies
    13
    Views
    3,297

    Re: 5093E radio installation

    Inger
    So what is in the pic that you attached? just curious..
  82. Re: This Mower Deck is The best John Deere can come up with

    Make a mark on your adjusters, and determine what it is that is moving.

    Can't understand why so many complaints from one owner. Sorry, don't mean to offend the OP.
  83. Replies
    14
    Views
    952

    Loader Re: Converting 300cx loader to solid mount?

    My 430 FEL on the 4300 works great.. not too loose. Comes off at least once a year for mounting the snow plow blade. Love the quick tach system.
    Wouldn't want it difficult to remove if ever the time...
  84. Re: John Deere 955 with FEL..... I want to install a grapple

    That's cool. Thanks for posting and the pics.

    A bit envious, as I'd like to put a single thumb on my Deere forks. Will have to fabricate, as cannot find a single thumb.
  85. Replies
    20
    Views
    1,203

    Re: TurboSaw on JD 4300

    atsah
    You don't leave the tractor. Obvious you've not figured out how this works or how well it works. My poor explanation maybe.
    But best you don't get one.. :D

    It is a perfect fit for what I...
  86. Replies
    20
    Views
    1,203

    Re: TurboSaw on JD 4300

    i.e. don't try to fall trees leaning toward the tractor.. not a hard one to figure out. ;)

    I was concerned that the 4300 might not have the hp to run this saw blade.. but it handles it quite...
  87. Replies
    20
    Views
    1,203

    Re: TurboSaw on JD 4300

    Has not proven to be "very dangerous" for the 75-100 stumps cut off at and below ground level so far.
    And due diligence and using what is between the ears (as with most equipment we operate or...
  88. Replies
    16
    Views
    1,004

    Re: Key won't turn in Ignition

    mularski
    :welcome: to TBN

    Stick with us, and we'll give you some better help than the dealer.. but suspect the new battery response was based on thinking the wrong thing.

    If lubricant won't...
  89. Replies
    27
    Views
    1,124

    Re: 1520 John Deere pto

    junkin
    Post a few pics of the levers, and may inform others as well as enlist some answers for you two.
  90. Replies
    7
    Views
    1,476

    Re: Battery Size Question - John Deere B

    :thumbsup:

    A pic or two would be great, and would like to see it.

    That 5v was a new one to me.
  91. Replies
    3
    Views
    595

    Re: POWER FLOW CHUTE PROBLEMS

    Does your old one have the same door?

    Part breakdown can be found with model no. by going to jdparts
    John Deere - Parts Catalog
  92. Replies
    10
    Views
    830

    Re: How to adjust governor arm and lifters ?

    Rob
    Is this a new thread on which engine? Maybe the 425 lawn tractor?

    Or a continuation from another thread?
  93. Thread: New Deere

    by beenthere
    Replies
    8
    Views
    1,537

    Re: New Deere

    If clutch is smokin, then yes, you need to tighten the bolts equally all around.
  94. Re: 2006 2305 - need socket size for front wheel removal

    Your set of metrics should cover you
  95. Replies
    20
    Views
    1,203

    TurboSaw on JD 4300

    Received a new TurboSaw LT3200 and used it on my JD 4300 today to lower the height of 50 or more spruce stumps, cleaning up a red oak/ white spruce plantation after 18 years since planting. Need to...
  96. Replies
    57
    Views
    24,946

    Re: 3 Point Turbo Saw

    Bought the LT3200 TurboSaw, and it fit right up to my iMatch with very little re-rigging of the lower and upper connection bushings.
    Was hesitant about the HP of the JD 4300 to power this...
  97. Replies
    25
    Views
    2,160

    Re: One more chance for John Deere

    Go for it..
  98. Replies
    17
    Views
    1,230

    Re: New John Deere X590 Smokes When Starting??

    Those selling additives will tell us anything... ;)
  99. Replies
    12
    Views
    1,031

    Re: JOHN DEERE THREE BAG LEAF VACUUM PARTS

    Post a pic or two of the holes you found in the PFB. Puzzles me that you could get holes from normal use. My Power Flow on one tractor is near 20 years of use. Would like to see what holes you have...
  100. Replies
    4
    Views
    2,750

    Oil & Fuel Re: bleeding fuel line on 5205

    :thumbsup: that you got it running.

    You can see the fuel lines, etc. in schematics on jdparts.com.
    John Deere - Parts Catalog
    Put in your model number, then go to "F" under alphabetical...
Results 1 to 100 of 5000
Page 1 of 50 1 2 3 4
© 2017 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.