Search:

Type: Posts; User: SandburRanch; Keyword(s):

Results 1 to 100 of 1367
Page 1 of 14 1 2 3 4

Search: Search took 0.07 seconds.

  1. Replies
    39
    Views
    6,129

    Re: Why left and right brakes?

    Anyone that ever operated a D John Deere then a tractor with L-R brakes knows the benefit of brakes.
  2. Re: How do you Sharpen your Knives and how often?

    This stone was my Grandfather's and I'm 76 so we can just assume it's about 100 + years old. I've had several in my life but this one is a favorite even though it appears to be worn out from...
  3. Replies
    44
    Views
    6,950

    Re: Repairing Hog Damage.

    I believe I stated a possible dog issue.

    To keep the dog issue as well as the hog issue at bay the ( trained ) dogs are within the confines of the electric fence with the trained hogs being on...
  4. Replies
    28
    Views
    5,900

    Re: Do It Yourself Counter tops

    Excellent Stimw.

    I have a sis that lives in a million dollar house. She had her kitchen re-done with Formica when the house was purchased. Said she would never have anything else for ease of...
  5. Re: Jacking up gravely zero-turn for blade removal and hydraulic fluid change

    If you have a truck to put it in the rear wheels can be rolled back out onto saw horses leaving the front wheels on the tail gate. The deck is then suspended in the gap between saw horses and tail...
  6. Replies
    44
    Views
    6,950

    Re: Repairing Hog Damage.

    A couple of choices for hogs is an electric fence or trained dogs. Hogs don't like either. A fence will need to be maintained on a regular basis as hogs will eventually root grounding material on...
  7. Re: Fencing my garden - how do deer react to string fence?

    I can see that being effective on a long list of pesky garden varmints.
  8. Re: Fencing my garden - how do deer react to string fence?

    For hot wire to be most effective the soil surface needs to be wet or damp at minimum. Deer do not like a electric fence that has an audible arc that sounds electrified. With that in mind, at a...
  9. Replies
    36
    Views
    2,980

    Re: Sharpened blades on mower deck

    This may not be your exact mower but it may be close enough for government work.
  10. Replies
    14
    Views
    1,407

    Re: Retiring my 2003 F150.

    Build a 5 gallon mouse trap to preserve the wiring, computer and all those things they want for nesting and nest sites.
  11. Replies
    44
    Views
    2,812

    Re: Cutting rubber horse stall mats

    There are knife blades made for Sabre saws that you might consider trying.
  12. Re: How do you repair a punctured tire filled with rimguard?

    If tubeless, and a puncture as in like a nail puncture, a pan head sheet metal screw will stop most leaks of that type. This even works on tires at highway speeds until it can be repaired correctly....
  13. Replies
    17
    Views
    2,916

    Re: JD LA135 Smoked on Start

    To the best of my knowledge, being the engine speed is controlled by a constant speed governor, the throttle plate will usually on most engines be wide open at cranking RPMs no matter where the...
  14. Re: How do you remove stuck wire from within conduit

    If I understand this correctly and being the damaged wire and conduit will both be replaced, consider taking it all out, straighten the bend in the conduit then pull the wire.
  15. Replies
    6
    Views
    2,079

    Re: Do it yourself drag harrow

    I made a couple of small ones for lawn tractors several years ago from frames I was given. IDK what they were originally but that's not important.
    I use one as a harrow by driving big bridge spikes...
  16. Replies
    3
    Views
    475

    Re: Cub Cadet LT1045 hard to start

    Before killing the engine, try loosening the gas tank cap. I've read where it was thought the tank was under a vacuum on their tractor for gas cap reasons and when killed the gas in the line was...
  17. Replies
    121
    Views
    11,230

    Re: John Deere X series lawn tractor

    You never need to get off to pick up, move anything, or inch your way back to an implement ?
  18. Replies
    121
    Views
    11,230

    Re: John Deere X series lawn tractor

    You won't need a hill. When loading or unloading try inching it up and down the loading ramp and I believe you'll get the picture.
  19. Replies
    121
    Views
    11,230

    Re: John Deere X series lawn tractor

    Same location as the X-380.
  20. Replies
    121
    Views
    11,230

    Re: John Deere X series lawn tractor

    I have a new X-350 with 0.9 hours that may soon be wearing a for sale sign. I had no idea the brake pedal arrangement would be so aggravating.
  21. Replies
    21
    Views
    5,527

    Re: Any well experts here?

    I know very little about wells and zero about packed wells but our well pumps a small amount of sand so early on I had to do something because the washing machine fill valve stuck in the fill...
  22. Replies
    37
    Views
    4,651

    Re: chain harrow question

    Anyone without art like that isn't using all their resources and I must admit I have some similar that evidently fell from the same family tree.

    I don't know bout mixing fertilizer but it must do...
  23. Re: How hard is it to repair the timer on a Maytag (Whirlpool) washing machine?

    Have you ever wondered what makes that screeching scratching sound when rotating those mechanical timers?

    About 40 years ago I stopped by my mother-inlaw's house and saw that her and my 10 year...
  24. Replies
    37
    Views
    4,651

    Re: chain harrow question

    **************************************************************************
    By throwing 2 counter clockwise loops in the chain and putting loop A on top of loop B you have succeeded in forming a...
  25. Replies
    169
    Views
    14,421

    Re: 2014+ Toyota Tundra 5.7.

    **************************************************************************
    You've owned more Toyota cars than I have owned total cars since 1957.
  26. Replies
    12
    Views
    2,838

    Re: Mower Deck Gauge Wheels and grease

    The dirt is there whether greased or not. So the question you have to answer for yourself is, would the shaft be better off with dry dirt or lubricated dirt. My mower wheels never touch the ground...
  27. Replies
    24
    Views
    4,509

    Re: Got a little carried away...

    Some charts show red oak weighing about 60lbs./cu.ft. at 70 percent moisture.
  28. Replies
    57
    Views
    7,158

    Re: Steel roof leaking

    They are correct. Air doesn't like changing directions and any bends that causes a direction change of air flow forms a partial seal that's known as a Labyrinth Seal.

    They did a good job.
  29. Replies
    8
    Views
    998

    Re: JD 4300 won't crank, but can jump it

    Led can oxidize so hard a common wire brush won't touch it. I either use a battery brush or scrape with my trusty pocket knife until the gray color leaves and bright silver lead is exposed, then I...
  30. Replies
    32
    Views
    1,846

    Re: Garage heating

    We have an LP vented convection wall furnace in our basement with thermopile so when electric fails because of ice, snow and wind storms we can still heat the whole house comfortably. Another...
  31. Re: Do I Need A Box Blade and Landscape Rake For My Use

    It looks to me all you need is a drag to knock high spots down, smooth and at the same time fill low areas .

    To move, level and smooth dirt, the box scraper will beat a box blade 7 days / week...
  32. Replies
    16
    Views
    1,729

    Re: Cub cadet wont start

    If it were mine I'd do a thorough cleaning of all passages, be certain the float will float, replace the needle valve, feel and listen for electric solenoid operation and check the oil level for...
  33. Replies
    57
    Views
    7,158

    Re: Steel roof leaking

    Condensation can easily be determined, when there is visible water, by taking an air dew point temperature reading at that level and comparing that DP temperature to the metal surface temperature.
    ...
  34. Re: What attachments do I need to keep my fields in good condition

    Locate your county Ag- extension service using the map and explain your situation to those folks. They are usually very helpful and most have published information from a university study such as...
  35. Replies
    169
    Views
    14,421

    Re: 2014+ Toyota Tundra 5.7.

    The PVC system and crankcase pressure can be monitored with a $2.00 shop made water manometer. Check the manual to determine what the pressure should be.
  36. Re: Adjusting the tension on mower deck ??????

    The operator's manual for adjustment instructions would be handy as you may already know. I have instructions for a JD LA-135 but I don't know if they are the same. Mine has a cable running down to...
  37. Re: What attachments do I need to keep my fields in good condition

    Texas has good county extension services for pasture management and possibly attachments necessary. Check with that available source your tax dollars has paid for in advance and they may first...
  38. Replies
    169
    Views
    14,421

    Re: 2014+ Toyota Tundra 5.7.

    My 2016 double cab is a nice truck but 6th gear doesn't get a chance to show what it can do because in hills and or a head wind I drive it in S-5 to stop all the up and down shifting.

    And I look...
  39. Replies
    39
    Views
    4,504

    Re: There's snow on the roof, who care's

    With living area heat loss, bath vent ducts through the roof, sewer pipe venting that's above freezing, dryer venting duct in the attic, outdoor air above 32F entering the soffit and directed along...
  40. Replies
    39
    Views
    4,504

    Re: There's snow on the roof, who care's

    What happens when air above 32F enters the vent system and supposedly travels the under side of the sheathing to the ridge vent while that insulating snow is on top? There are many people that...
  41. Replies
    39
    Views
    4,504

    Re: There's snow on the roof, who care's

    Those with snow remaining on the roof probably have a type of ice dam, very little is known about, and water is entering the walls of the structure. In this case on my house, the complete roof had a...
  42. Replies
    17
    Views
    2,567

    Re: Best crop for SANDY soil food plot

    After maturity maybe roto beating ( flail mowing ) to a desired height would be a solution. Wildlife would still be in there for the seed and you could walk it.
  43. Replies
    15
    Views
    3,199

    Re: Planting grass seed

    Some soil conservation districts have small drills for seeding grasses, alfalfa, clover etc. and can be rented usually at a insignificant fee.
  44. Replies
    17
    Views
    2,567

    Re: Best crop for SANDY soil food plot

    Consider contacting the extension service in that area and ask if Millet will do well enough there. It is grown in some harsh conditions world wide but it may not meet your height consideration of 2...
  45. Re: X350 John Deere - D140 Hydro Tranny Question

    Thanks from SandburRanch
  46. X350 John Deere - D140 Hydro Tranny Question

    The X350 specs lists a K46 hydro but the lowe's site that sells the lower class D140 tractors doesn't list the tranny number. Does anyone know which transmission is in the D140 or could link a spec...
  47. Replies
    16
    Views
    1,636

    Re: Cows in a horse trailer?

    Cattle may be a little difficult to load because of the trailer being short and the front being closed in. Cattle, as with most animals, don't like to go where they can't see into the future. ...
  48. Replies
    49
    Views
    4,841

    Re: Broken bolt

    The scary part is we are driving at turnpike speeds with that same bolt quality. Possibly flying with that same quality hardware too.
  49. Thread: Ouch!

    by SandburRanch
    Replies
    38
    Views
    2,646

    Re: Ouch!

    Welcome to the club, and OH, it gets worse.
  50. Replies
    6
    Views
    1,300

    Re: clearance measures for pin/ bushing

    If the bushing has a 0.001" press fit that 0.001" will need to be compensated for when the I D of the bushing is machined or the pin will be too tight. A thousandths per inch of diameter clearance...
  51. Replies
    40
    Views
    3,816

    Re: Zerk fittings

    A tap is less likely to break when a T-Handle can be used. That's probably why they were invented. If a T-Handle isn't available or close quarters inhibit its use, I've used 2 Cresent wrenches by...
  52. Replies
    12
    Views
    2,461

    Re: Cattle Panel Bending

    That's what I use. The 6x6 openings make for easy gathering and 24" diameter is easy adjustable. I two piece mine which makes then easy stacked storage by being cradled.

    You could bow the panels...
  53. Replies
    39
    Views
    6,639

    Re: Ridiculous! Thermostat help?

    If in certain winter weather conditions you see a creamy white mucus looking build up on the dip stick and the filler cap underside you'll know what not operating at recommended temperature does. ...
  54. Replies
    20
    Views
    3,816

    Re: Gutters and french drains

    Buy it for looks and a nightmare or buy it for life. Your choice but you can't have it both ways.
  55. Replies
    20
    Views
    3,816

    Re: Gutters and french drains

    Gutters and french drains are a maintenance nightmare. Consider using your tractor to form a swale for drainage that will handle water far superior to 10 french drains.

    Gutters: I have gutters...
  56. Re: cutting holes in steel gate post for hinge bolts

    Wooden gates my father made were sort of hinged without any hinges. They would slide or swing by setting 2 posts off set a little with a couple of short 2x4s across the posts and the gate rails...
  57. Replies
    87
    Views
    28,617

    Re: My wife wants a Gazebo, Help!

    The grain bin concept idea is great and I agree with the statement " useless gazebo " when they won't keep the rain, hail, bird crap or sun off of my ole body. Mine would have a roof and be called a...
  58. Re: cutting holes in steel gate post for hinge bolts

    Just as the bit is about to break through drive a tapered punch in to finish the hole and a large percent of the wrist twisting will be avoided.
  59. Replies
    20
    Views
    3,229

    Re: ice melting

    To prevent a slippery surface I'd use cat litter as opposed to any corrosive material and let the weather do the melting in the spring.
  60. Replies
    23
    Views
    5,064

    Re: Lifting Equipment safely

    I've put the lawn tractor up on the level for years.
  61. Replies
    25
    Views
    2,563

    Re: Ice in tires

    Soluble oil will alleviate your concerns about water corrosion.
  62. Replies
    64
    Views
    10,086

    Ballast Re: Can I do it Myself?

    If you don't have a valve stem retainer to pull the stem through, a strong string/cord can be attached to the stem threads with a clove hitch knot and the two ends brought through the hole for later...
  63. Replies
    206
    Views
    25,793

    Re: Lets see your Woodworking Skills

    _______________________________________________________________________
    Thanks for the compliment but I bout had to laugh when I read " exotic ". That wood came from a Oak stump after I took the...
  64. Replies
    136
    Views
    34,357

    Re: My shop build

    Is it a requirement to have the plumbing inspected in a rural area?
  65. Replies
    136
    Views
    34,357

    Re: My shop build

    Am I reading this right that the building is being built on fill dirt?
  66. Replies
    40
    Views
    3,816

    Re: Zerk fittings

    Drill diameter for 1/8" pipe tap.
  67. Replies
    206
    Views
    25,793

    Re: Lets see your Woodworking Skills

    In my later years I've reverted to smaller projects but they can also be fun. The jig to cut the spool notches ( which need to be a perfect book match ) was nearly as much fun as making tape...
  68. Replies
    40
    Views
    3,816

    Re: Zerk fittings

    If you are unable to use calipers to measure the hole diameter, try drill bits to measure with until you get close within a few thousandths, then compare 1/8" pipe tap drill size to determine if a...
  69. Replies
    137
    Views
    9,930

    Re: Chain saw sharpening advice sought

    I'll be looking for a diamond burr but i not putting it in my dremel that runs 20,000 rpm or whatever it is. I can't think of a faster way for me to screw up a chain. It'll be going in my variable...
  70. Replies
    137
    Views
    9,930

    Re: Chain saw sharpening advice sought

    For years I touched up my chains in the field by hand with an Oregon guide and file. Then a thought , and I took my DeWalt cordless drill motor, the file and guide with me. Chuck the file in the...
  71. Re: Check your hose clamps with or without a cab

    Loose clamps weren't a problem 50 years ago but it seems the invention was light years ahead of the general public and mechanics comprehension so failure to sell over the long term was inevitable.
  72. Replies
    39
    Views
    6,639

    Re: Ridiculous! Thermostat help?

    Without a temperature shut down, placing cardboard in front of the radiator is a quick to way to ruin an engine. Rates right up there with no oil or no water.

    A thermostat needs a gradual...
  73. Replies
    17
    Views
    2,272

    Wind Generation

    Has anyone ever seen evidence of a buried cable from any of the large wind generators in your area or a power sub-station to distribute electric power? I've driven by thousands and have never seen...
  74. Re: Let's post our Made in USA tool finds (yard sales, old store stock, auctions etc)

    An early Sears Roebuck Sabre saw I picked up at auction for a couple of bucks and it really doesn't like for people to change his name to jig saw.:laughing: Works like new. If someone knows how to...
  75. Replies
    48
    Views
    3,813

    Re: Craig's List: Is reading a lost art ?

    ******************************************
    I don't buy or sell on craig's but that's a good plan. Then about all that remains is watching for counterfeit money.
  76. Replies
    32
    Views
    3,139

    Re: Tire Pressure?

    Mowing side hills I keep my tractor tires inflated to maximum. The X-tra weight on an under inflated down hill tire cannot be good. If on a maximum slope and that tire should roll from the rim,...
  77. Replies
    70
    Views
    7,274

    Re: For the other retired guys::

    **********************************************************
    Retired in 1999 and was quickly asked; what are you going to do. My response was, " whatever is fun and irresponsible. "
  78. Replies
    59
    Views
    9,317

    Re: Best way to yank out shrubs? Etc..

    Cut the shrub off and drop a clove hitch knot over the stump. To do, form 2 loops with a counter clockwise motion, place loop A on top of loop B and drop this over the stump and you have a clove...
  79. Thread: Flat Tire

    by SandburRanch
    Replies
    35
    Views
    2,157

    Re: Flat Tire

    That recommended pressure on the door is for the best ride so it can possibly meet its competition and not best for the tire. Remember the Ford and Firestone story ? You've got something to learn...
  80. Thread: Flat Tire

    by SandburRanch
    Replies
    35
    Views
    2,157

    Re: Flat Tire

    *******************************************************
    I carry a couple of pan head sheet metal screws to plug the hole so I can get home or to a repair shop. Have driven a couple hundred miles...
  81. Replies
    663
    Views
    120,881

    Re: Critters captured on camera

    ********************************************************
    Has Mange
  82. Replies
    22
    Views
    3,479

    Re: Household Well Water Pump Troubles

    After replacing a bladder tank I decided to see just what replacing a bladder would involve. To get the old one out it had to be cut in sections with tin snips through the hole. I've read to...
  83. Replies
    21
    Views
    3,109

    Re: Steel Chain size and length

    1/4" grade 80 spinning chain is all anyone needs up to 70 hp 4x4 for pulling stumps, towing or transporting the tractor. You'll appreciate the weight at days end. This walnut tree was pulled with a...
  84. Replies
    124
    Views
    19,323

    Re: Compact Tractors are Designed All Wrong

    QUOTE:

    1. The 3ph is an abomination. It is an historical industry compromise that, like all compromises, is a mediocrity at best. It is the interface that has launched a thousand hernias (and a...
  85. Replies
    162
    Views
    11,135

    Re: Do we need a warm garage....

    We have 2 stainless sinks and the mounting flanges on both show magnetism traits while the main sink walls and bottoms do not.

    Below is an interesting read on stainless and magnetism.

    Why...
  86. Replies
    96
    Views
    8,235

    Re: Coyotes getting worrisome

    I have fun playing games with my coyotes. To my knowledge none are boy or girl scouts and know how to un-tie a Clove Hitch knot, but at least one sure knew where to chew the rope so he/she could...
  87. Replies
    17
    Views
    30,589

    Re: A couple of JD LA145 issues

    I'm very sorry to hear of those no longer with us.


    This post by " justwork "was in the back of my mind all the while I was locating the problem.

    Removed the manifold and found the carburetor...
  88. Replies
    17
    Views
    30,589

    Re: A couple of JD LA145 issues

    Is this the fuel shut off solenoid on your LA 145? I have a LA 135 with very similar fuel starvation symptoms. I've checked the fuel pump operation and my next step is to check the fuel cut off...
  89. Replies
    31
    Views
    1,901

    Re: To all the Vet's, THANK YOU!!!!

    Before Nam and thanks.
  90. Replies
    81
    Views
    9,675

    Re: PROPANE TANK OWNERSHIP

    Buried tanks are constructed to be buried and the purpose is to keep the gas pressure up to a usable pressure in colder climates.
  91. Replies
    192
    Views
    11,933

    Re: Your thoughts on my basement plans

    Eddie, my complete house HVAC supply ducts are PVC under slab. Return in attic. That's how it's cooled and heated for less with a 2.5 ton unit that's 32 years old and that's why my basement is inset...
  92. Replies
    192
    Views
    11,933

    Re: Your thoughts on my basement plans

    Check with your concrete supplier for vertical distance a pour can be dropped without separation and I'm sure a vibrator will be recommended with a qualified operator.
  93. Replies
    192
    Views
    11,933

    Re: Your thoughts on my basement plans

    Our finished basement / game room / storm shelter is 14x20 with walls inset from the exterior building line as follows. E wall about 20ft., W wall about 35 ft., N wall 3 ft. and S wall 5 ft. Egress...
  94. Replies
    98
    Views
    16,777

    Re: Thumb in the table saw. Warning - pictures

    If you'll make two, one of each method, I believe you'll quickly see why the heel is always glued on rather than cutting out.

    But of course if you need one immediately by all means cut it out...
  95. Replies
    98
    Views
    16,777

    Re: Thumb in the table saw. Warning - pictures

    If you'll make two, one of each method, I believe you'll quickly see why the heel is always glued on rather than cutting out.

    But of course if you need one immediately by all means cut it out...
  96. Replies
    98
    Views
    16,777

    Re: Thumb in the table saw. Warning - pictures

    As you realize you are very fortunate to still have the most of your full thumb so please build yourself at least one of these push shoes and use normal operating procedures.

    To make construction...
  97. Replies
    14
    Views
    1,405

    Re: Mesquite Growing on Dam - other places

    Yes it does and that's why nature lines the banks of streams and rivers with trees.
  98. Replies
    29
    Views
    3,135

    Re: Water Pump for Portable Water Tank

    When there isn't enough moisture to germinate seed a common farming practice is to " dust it in " shallow and wait on the rain.
  99. Replies
    5
    Views
    714

    Re: Engine Shutdown Systems

    ************************************************************************
    Exactly, and it seems a spring loaded toggle would be just the thing for a start bypass.
  100. Replies
    29
    Views
    3,135

    Re: Water Pump for Portable Water Tank

    You may want to just consider the dusty drive with the 55 gallon drum if my calculations of 1" of water on a food plot as small as 1 acre are correct because it is telling me it will take about...
Results 1 to 100 of 1367
Page 1 of 14 1 2 3 4
© 2017 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.