I recommend any tractor that has a dual speed hydro.
Type: Posts; User: 94BULLITT; Keyword(s):
I recommend any tractor that has a dual speed hydro.
A tractor engine is different than an engine a light duty truck.
The 5.0 mustang has a higher rev limiter than 5.0 F-150. I think the manufacters take into account what the engine is going into...
I bet that would have been fun ride.
Are you running .043 or .050 chain on you 192? I have .043 on my 170 and it bent a cutter.
I think he ran 056's back then. He still has some but he said he is afraid to run a big saw since he is older now, he said he can't hold them.
Does it burn your hands when you use it?
What is the difference in a gas powered truck running at red line and a diesel powered truck running at red line?
I like that seat. maybe someday I'll put one on the BX.
I like the looks of this one
Michigan Seat Highback Suspension Seat — Black, Model# V-5300 | Suspension Seats| Northern Tool + Equipment
I know a guy that rented a John Deere 310 from Sunbelt and drove it over 20 miles to his house:laughing:
I know an old guy that is a logger. He said he never ran a saw with a bar larger than 20.'' He told me he took down a tree that was over 5' in diameter with the 20'' bar. I think cutting something...
I bet the camera is nice for mowing.
I think the lines are built into the camera.
I like how the lines are adjustable on yours and you have 4 different views.
or if he had $2,000 to spend on a backhoe he could just rent for a while for that kind of money.
The stiff arm backhoe would not work good on a tractor.
The 12v power port on my Kubota's were not on with the key off. They are now. I maintain my batteries through the 12v power port.
You wiring work looks good.
He may be talking about a backhoe like this
CE Attachments BH609 Skid Steer Backhoe for sale | Don Allison Equipment
Do you like the trailet other than the problem and poor support? I would try to figure out what is wrong with it, it would be cheaper than a new trailer.
Here is some stuff you can check:
You never went into detail on what is wrong with the trailer. If you explain maybe someone here can help.
I saw a Datsun pickup at the track one time. It had skinnies on the front, huge slicks on the rear, a cage, and wheelie bars. Just looking at it, it looked like it would run a 9.50. He pulled up to...
I wonder if the sidelink needed adjusted?
Here is my Kaufman. I'm happy with it.
How many of them drive a 3rd gen Camaro?
I loaded some brush and moved a trailer today.
Cool! I hope it works out good for you.
add tractor attachments to the list. The only time it is acceptable to get rid of an attachment is if you are going to upgrade.
You would wear a tractor out here trying to dig a pond. The ground is rally hard!
A couple things you all may want to consider are a place to store the pins when the tailgate is not locked in. For the locking tailgate you may want have the pins in location so they will not be...
You would be better off pulling the stuff out instead of cutting it off like I suggested earlier. If you pull it out you will get the root and it will be less likely to grow back.
I really like your whole setup, the grapple looks great on that size tractor:thumbsup:
A regular old chain will do the job.
Ford has been using aluminum hoods since the early/mid 90's. They also used an aluminum bed on the Raptors that ran Baja.
I bet if he tried to move the truck he put a nice wrinkle in the bed side.
I would use a trimmer and put a brush cutting blade on it. Once it is cut down you can push it into piles with the loader on your tractor and burn it.
Thanks for the kind words on my installation.
I was using the tractor some this evening. The sun was very strong. I had the back of the tractor facing the sun and there was not any glare, I even...
That is the one:rotfl:
It is the new 25K Haulmaster deckover trailer from Harbor Freight.
It is the new 25K Haulmaster deckover trailer from Harbor Freight.
A engine like the 1.0L Ecoboost would be cool too. It would still have more power than the old 4cyl used to.
Ram uses a lie-o-meter. I think some of the Cummins trucks were way off too.
My Ford is off .01 too. I think it the reason it is off that amount is because it is impossible to get the same...
So far I have not had any problems with it in the sunlight.
A 5' would be the best size for your tractor. A 6' could be cut down to 5' or you could just unbolt some tines to make it 5.'
I would mount the lights on the underside of the top of the ROPS. They will be protected under the ROPS. I would clamp the lights to the ROPS. Do you have a loader? Could you mount the mirrors to...
I would not be stacking wood for free. If I stacked it I would charge accordingly. What happens if a Tier 1 customer tells a tier 2 or regular customer you stack the wood for free? What is the...
I have been using the tractor to clear and load brush. I have also moved a few trailers and it is nice to be able to watch the trailer on the monitor. I'm really liking the backup camera. So far I...
The old Colorado could be ordered with a 5.3. Maybe the new one will get the new 5.3 in it. It would be pretty fast with 355hp. They could do a 6.2 with AWD and call it a Cyclone.
What it wrong with it? You say it does not pull good, what do you mean by that, does it pull hard, sway or what?
I don't think the county line rakes are that hot but I have heard they have different manufacturers on the east and west coast.
One of these in a 6' would be nice for your tractor.
It looks like a 3/4 size Silverado/ Sierra to me.
I have a Kaufman trailer and I really like it. It pulls very nice. I would buy another one or recommend them to anyone. I think it is just as nice as other brands that cost more.
I don't put much...
That should be a good little snow mover. I use the BX with a rear blade to push some snow and it does it good job. I have pushed 18'' with it. A front blade would be better yet. You may want to keep...
Check out this thread: http://www.tractorbynet.com/forums/kubota-buying-pricing/314859-two-2-less-payments-kubota.html
If you decide to buy a used tractor be sure there is not a lein on it. There has been some discussion recently about selling tractors and not paying them off. Some dealers even buy tractors that...
They may have something else that will work better, I just found that quick.
The monitor accepts a 1/4-20 thread. I think this is what you need to make it work. RAM 1" Diameter Ball with 1/4"-20 Stud for Cameras, Video & Camcorders
I was talking about the Kubota autohitch.
You should probably see around 170-175*, if you get it on a long hard pull it may heat up a bit more. The surface temp should match the coolant gauge.
I have a 25" bar on my 441 and it is a tad nose heavy. I have heard with a 20'' or the 28'' light bar it is balanced perfect. I have a 28'' on the 660 and it is also a little nose heavy. When is the...
You could find an older Kubota B series, JD or Yanmar tractor. You could use a rear finish mower to mow and a rear blade or blower for snow. A tractor would be more duarble than a gardern tractor. A...
If you mow taller it will promote deeper roots and the grass will look thicker. I mow at 3.25.''
Don't forget about a proper mowing technique, don't mow too low or high and discharge your clippings so they are evenly spread over your lawn. Also keep your blades sharp deck leveled. If you really...
I see used 290's for around $300 on craigslist. I can't understand how they bring as much or more than a 026 that is a pro grade saw.
The playing field may be more level now with gassers going DI. I guess we will have to wait and see how reliable their injectors are VS a diesel.
I'd like to have a Model A with a diesel in it,...
I think the autohitch is a good idea and it would save some time but how many people are going to buy it because it is $6,000 more than the manual hitch. I wonder if they are testing the waters on...
I would do that to one if I got a 201T. I hear it really wakes them up. I'm am hopping to get a chance to advance the timing on the MS 170 tomorrow. It has the key cast in flywheel so IDK how hard it...
I started with a 034 Super. I had some big trees I needed to work up. I almost got a MS 460 but I did not know at the time if it would have enough power, so for a little more money I went with the MS...
I like the flail mower. I think the attachments run off the mid PTO.
It would work better than the 2 saw plan (50cc and 70cc). I have the 5 saw plan, 30cc, 50cc, 60cc, 70cc, and 90cc.
I thought it sounded like you got ripped off. I looked up the condenser at Messicks and it is $789.15, so I guess they treated you fairly.
For $50K you should be able to find a couple of good used tractors. Here is a nice one for $32k. http://www.tractorhouse.com/listingsdetail/detail.aspx?OHID=8694645 With a bigger tractor would you...
What kind of budget?
I think these newer vehicles with a auto don't hold back like a older vehicle because of fuel mileage. They want them to roll off the hilld and burn brakes up to save .001MPG. I think a engine with a...
That was a great deal for a MS270.
We think about the same Dave, I get a bigger saw if it takes more than 10 seconds to cut a piece of firewood. The limit for me with the 034 super is probably around 14-16". I have a 20" on the 034, I...
You really need to work the tractor to appreciate it, you can't appreciate it driving around the dealers parking lot:)
The dual speed allows you to do more work in any range. When the DS is in low it gives you more pulling power than a tractor that does not have a dual speed hydro because it is "geared" lower. With a...
$1,500 for them to replace the condenser???????????????????? What did they charge for the labor?
For those of you that don't know on a 40 degree day you have to run the a/c on on a cab tractor so...
You probably would be better off with a Utility tractor if you are going to be taking on bigger jobs.
That is great mileage. Watch the instant MPG bar, it helps. I found that with the huge fuel tank these trucks have once you get down to 1/2 tank it is hard to pull the mileage up much. My truck is...
Do any of them have dual speed hydro and stall guard? All those tractors with out a loader are within 150lbs off each other.
I thought I had a picture of the filter on my 441 but I don't. I'm pretty sure the newer saws have the HD2 filter. The HD2 is supposed to filter to a finer micron and flow more. Yes, the 441 draws...
Are you happy with your current size tractor? If you are the L6060 would be a good match. There is not another CUT that can match the productivity of a Grand L with its HST+. I am not sure if all of...
Cool, I hope you like them.
If you want the most power for that size saw go for the 461 instead of the 441. If you want more power for about another $100 you can get a 660. If you want more power add dual port muffler to the...
Did you decide on a saw yet?
I thought when i first got it I turned the lines off someway but know I can't figure it out. Maybe I was mistaken, I think the lines may be built into the camera. I thought Eric said he got the same...
It sounds like to me your brakes were overheated badly for the metal to be flaking.
Here are the brake rotor diameters for 2014 trucks
Ram 1500- 13.23''
Chevy 1500- 12.99''
2013 Titan- 13.77''
Chevy 2500- 13.98"
The front rotors on the new F-150's are larger than the F-250's.
A 4x4 Supercrew F-150 V8 will stop better from 60-0 than a 01 lightning.
Have you ever seen a a truck with a plastic bed liner that the truck bed rubbed the cab from someone hauling something not tied down and having to slam the brakes?
Wouldn't a red flag come up if some one tried to get a loan on something that already had a lein against it?
I also forgot to saw the 441 likes to turn high rpms and the 660 had a lot of torque.
I have a MS441CM and a MS660. I really don't need anything bigger than the 441. If I was going to buy a 441 it would defiantly be a Mtronic, it makes for a awesome running saw. The 441 has a better...
I can't believe the dealer does this. I wonder if the dealer would be somewhat responsible if JT quit paying on the machine since they knowingly sold it without the lien being satisfied.
Are you sure the chain is tight when it is throwing it?
How big of stuff are you cutting when it throws the chain?
Lol, I was talking to a Scooby074 and I told him I was going to insulate my tractor and he suggested I use mylar insulation. It is on my to do list. It is funny that we are doing similar things to...
Option 1 Front Mount Snowblower - Erskine Attachments LLC
Option 2 get one of these and a hydraulic snow blower Hydraulic Power Unit Attachment - Power Pack by Quick Attach Attachments LLC
You could probably hang a camera on each mirror and use the remote to switch channels when you change lanes. I'm not sure if you would be able to eliminate the blind spot.
I could not justify...