Search:

Type: Posts; User: beenthere; Keyword(s):

Results 1 to 100 of 5000
Page 1 of 50 1 2 3 4

Search: Search took 0.55 seconds.

  1. Replies
    6
    Views
    187

    Re: x595 engine kills when rising off seat

    I'd unplug the seat switch and put a wire jumper in the female slots to replace the male prongs of the switch. Works for me.. But beware, no more safety if you fall off the seat.
    1" long piece of...
  2. Re: John Deere 4100 electrical/no start issue

    Maybe begin by removing wires and cables one at a time and tracing the voltages to find out where the problem lays.
  3. Re: John Deere 4400 driveshaft seal leaking. need advice

    Ewasson
    Can't blame you for being a bit apprehensive about the task.
    Can you describe or post pics of where you will be working on the 4400? May help to give suggestions on how to proceed.
    ...
  4. Replies
    6
    Views
    290

    Re: part for steering arm on jd 2720

    Ok...
  5. Replies
    6
    Views
    290

    Re: part for steering arm on jd 2720

    jg
    Don't think Deere intends for the 2720 to have chains on the front tires.. we do that at our own risk. ;)

    I flipped the front wheels to get wider stance, plus have room for chains (on 4300).
  6. Replies
    3,871
    Views
    1,122,532

    Snow Equipment Owning/Operating Re: Pictures of your snow weapons

    Thought the same thing..
  7. Replies
    18
    Views
    523

    Oil & Fuel Re: JD 425 oil change info & parts

    The s/n in your pic is a '93.
  8. Replies
    18
    Views
    523

    Oil & Fuel Re: JD 425 oil change info & parts

    Dip stick is not screwed down to check. Would encourage you to change the tranny fluid and filter as well. Thanks for the clarity of the update.

    Go to this link for the manual.
    Operating
  9. Replies
    15
    Views
    401

    Re: 2020 load control bushing

    Maybe this schematic will help..
  10. Thread: Shear Pins

    by beenthere
    Replies
    25
    Views
    783

    Re: Shear Pins

    Magnum
    Shear pins are there to take the "hit" so something else doesn't break that may be more expensive than shear pins. Your decision as to what to use.
    If shearing too many pins, find out what...
  11. Replies
    18
    Views
    523

    Oil & Fuel Re: JD 425 oil change info & parts

    Maybe this 425 is not of the older model that had the plastic cam.. we've not been told the build date or the serial number.
  12. Replies
    18
    Views
    523

    Oil & Fuel Re: JD 425 oil change info & parts

    By the sounds of it, you need to learn a lot about how to care for your 425, IMHO. So far, it has been abused but being a faithful Deere continues to keep going.
    Check out what replacement cost...
  13. Replies
    28
    Views
    1,251

    Re: Got my dream machine yesterday JD4510

    :thumbsup: :thumbsup:
  14. Replies
    21
    Views
    1,211

    Re: Turf vs. Industrial Tires

    That video didn't do much for me.. but appears that particular tire featured did ok in the test track setup.

    To me, tire grip has much to do with temperature, ice be it from melting and then...
  15. Replies
    21
    Views
    1,211

    Re: Turf vs. Industrial Tires

    I also hear that turfs are better for snow plowing.. and I believe it.

    I have the R-4 industrials because I want the extra strength (plys) for working in the woods. But some winters have to put...
  16. Replies
    12
    Views
    633

    Re: Briggs Vanguard Carb problem

    jaxs and GLyford

    Duly noted your comments. Thanks..

    And will search for a Walbro carb.. and keep the Seafoam treatment to the fuel.

    bt
  17. Replies
    3,871
    Views
    1,122,532

    Snow Equipment Owning/Operating Re: Pictures of your snow weapons

    Looks formidable and ready to go to work. Need snow.. :D

    Do you have to control depth by the 3 ph height, or let it float on the ground while blowing snow? Maybe there are skid shoes that keep...
  18. Replies
    3
    Views
    303

    Re: Testing 1025r neutral start switch?

    The switch appears to me part # MIA881067 and shown in jdparts John Deere - Parts Catalog

    key #6 in schematic of rear wiring harness.
    Google the part # will bring up some hits.
  19. Replies
    10
    Views
    597

    Re: 4400 wheel locked

    dfkrug
    Would that be the cam "shaft" key 4 part that is circled in red on both right and left housings?
    I will see about lubing those shafts if so. And hope lube will help keep them free to move. ...
  20. Replies
    10
    Views
    597

    Re: 4400 wheel locked

    WD-40 is about as poor a penetrating fluid as one can get (my opinion). Kroil is better, but the best I've discovered is BlueCreeper. Hands down, BC is best I've found. Not a product commonly found...
  21. Replies
    5
    Views
    555

    Re: My 3032e vs a 4310?

    Get what you would "love" to have IMO keep looking.
  22. Replies
    9
    Views
    333

    Re: JD870 Starter Issue

    :welcome: to TBN
    When was last time battery was new? If more than 5 years, might need to be upgraded. If less than 5 years, suggest getting it load tested.
  23. Replies
    3,871
    Views
    1,122,532

    Snow Equipment Owning/Operating Re: Pictures of your snow weapons

    soldier
    Nice fab job. Imagine the first good snow will be a joy to try it out.

    Couldn't help but notice the yard of the fab shop.. rather ill-prepared for likelihood of winter and up-coming...
  24. Replies
    6
    Views
    348

    Re: jd 5400 ignition switch - extra wire

    Again, joecdeere to the rescue. :) I was hoping joe would see this and be able to help out the OP.

    :thumbsup: to joe
  25. Replies
    3,871
    Views
    1,122,532

    Snow Equipment Owning/Operating Re: Pictures of your snow weapons

    The ball is stationary. The trailer hitch connection is welded to the leading edge of the blade so there is the pivot point.
    A pic before painting. Dimensions 12" leading edge, 24" trailing edge,...
  26. Replies
    3,871
    Views
    1,122,532

    Snow Equipment Owning/Operating Re: Pictures of your snow weapons

    Powerscol
    Own design and had it fabricated. Will hang off the left or right FEL mounting stub, and pins to the drawbar with telescoping push arm, then is lifted using a chain around the 3 ph arm....
  27. Replies
    3,871
    Views
    1,122,532

    Snow Equipment Owning/Operating Re: Pictures of your snow weapons

    Have posted this before, but this "wing" will get the snow off the road and into the ditch.. :D
  28. Replies
    12
    Views
    679

    Re: Having to jump-start my D110

    A bigger bugger if that doesn't fix the problem.. :D
  29. Replies
    11
    Views
    850

    Re: 2440 Coolant heater

    If "hot", electrical cord, and oily surrounding "per the pic" shown, then I'd consider some serious de-greasing.
    My recollection of these heaters in my cars and my old 2-cyl 420 JD was they were...
  30. Replies
    12
    Views
    679

    Re: Having to jump-start my D110

    Yup.. a new battery.
  31. Replies
    10
    Views
    1,044

    Re: 54" mower deck

    Sent a PM to chuck, and he responded that he has more pressing issues and no time for this one.. :rolleyes:
  32. Replies
    10
    Views
    980

    Re: Opinions-3032E

    Maybe it wasn't really "rolled over" but instead turned on its side (like with a load in the bucket too high, tipping and stressing the FEL brackets). Certainly a guess (WAG), but maybe an...
  33. Replies
    13
    Views
    884

    Re: john deere 5055d 4 year old tractor

    TR
    I recall the same dilemma when the two sides were in synch in the beginning and then they moved independent of each other. Thought it was just a change in the looseness of the fit over time....
  34. Replies
    13
    Views
    884

    Re: john deere 5055d 4 year old tractor

    I'm thinking, and responded to other thread the OP opened, that the bolt is sheared off on the rod that connects the two sides..
    Shown circled in red (for a 553 FEL but similar to my 430 FEL), and...
  35. Replies
    6
    Views
    497

    Re: John deere 5055d hydraulic issues

    Put the bolt back in that keeps the left/right tilts in sync. They can shear off easily.

    Circled in red (if you have the 553 FEL or similar rod connecting the two sides)
  36. Replies
    12
    Views
    633

    Re: Briggs Vanguard Carb problem

    fa
    Thanks, I will look for that product and give it a shot.
    bt
  37. Replies
    5
    Views
    694

    Re: What do I have?

    Notta Deere.. a "wannabe" Deere ? ;)
  38. Replies
    12
    Views
    633

    Re: Briggs Vanguard Carb problem

    Thanks /pine.
    I drained the fuel tank first thing when it would only run with choke half on. Then drained the small sediment bowl under the fuel on/off valve, and then drained the carb float bowl....
  39. Replies
    12
    Views
    633

    Re: Briggs Vanguard Carb problem

    Thanks for the suggestions. I will try the seafoam through the venturi tomorrow (after some deer hunting) and see what effect it has.
    Also, for the heads up on the carb replacement.
    The old 8hp...
  40. Replies
    12
    Views
    633

    Briggs Vanguard Carb problem

    This 138400 series with nikki carb is not running without being on half choke. Carb kit is $45 but don't know if that is the fix that is needed. Any thoughts? Engine is 3 yr old and has around 100...
  41. Replies
    10
    Views
    1,044

    Re: 54" mower deck

    Agree with Morrisonsteel, but thought OP may have a GX345 that has a 54C deck.. He's not been too responsive, so hard to help.
    Pics might help too.. as well.
  42. Replies
    10
    Views
    1,044

    Re: 54" mower deck

    Waiting for more info.. would like to help.
  43. Replies
    18
    Views
    881

    Re: 4300 exhaust smoke

    How many hours on the engine before the re-build?
    Any idea what precipitated the need for a re-build and how extensive was it?

    Hopefully the engine will settle in and clear up the smoke problem...
  44. Replies
    10
    Views
    1,044

    Re: 54" mower deck

    If you put up the serial number to confirm the model deck, I'll give it a shot.
  45. Replies
    10
    Views
    1,044

    Re: 54" mower deck

    If you mean the top covers over the spindles, then you can get them through your Dealer. part # shown for the RH side.
    I leave these shields off my decks, because then I can blow them dry after...
  46. Replies
    3,871
    Views
    1,122,532

    Snow Equipment Owning/Operating Re: Pictures of your snow weapons

    For control of mice, poison and mouse traps is the only good answer. IMO
    Losing a seat isn't as bad as a mouse nest in the wiring, where the mice just chew all the insulation off the wires... very...
  47. Replies
    11
    Views
    717

    Re: 110 TLB Grease Recommendation?

    I've switched to the new WD-40 product. NLGI grade #2 all purpose.

    But figure any grease is better than none... will see if I like this one..

    don't like the ones that are black (graphite...
  48. Thread: JD 455

    by beenthere
    Replies
    8
    Views
    708

    Re: JD 455

    Good to hear.

    What "fuel cleaner" did you use?
  49. Replies
    27
    Views
    1,979

    Re: Should I buy this 425?

    Certainly a fair price.

    If you are not going with a snow blower, then the wheel weights are likely not necessary.

    :thumbsup: you have a great deal and IMO the best tractor of any brand, and...
  50. Replies
    6
    Views
    712

    Re: ? for JD experts 480B forklift

    Pig Fab
    :welcome: to TBN

    Appears you can be a big help to TBN with information and knowledge. tks for joining.
  51. Replies
    27
    Views
    1,979

    Re: Should I buy this 425?

    Note: to open the hood, lift the front leading edge first, then the rear of the hood can be tipped up and forward. A trick that some do not know until the hood is broken.

    The spindle should only...
  52. Replies
    27
    Views
    1,979

    Re: Should I buy this 425?

    Would also buy it in a heartbeat/second. Even tho I have one already.
    Half the price it should be.. IMO.

    Looks to be the AWS all-wheel-steer which will do near the performance of zero steer,...
  53. Thread: JD 455

    by beenthere
    Replies
    8
    Views
    708

    Re: JD 455

    No idea, but :welcome: to TBN

    What is your mechanical skill level? up for doing any wrenching on your diesel engine?
  54. Re: Ignition switch issue 3038 3032 Common problem? Is there a fix? or replace?

    New ignition switch.. $45 part LVU29433

    Pic of what you have that is loose would maybe help with better solution.
  55. Replies
    137
    Views
    21,897

    Re: How to rig an X595 to mow in reverse

    All dealers are not the same.. still could have the liability.. just choose to ignore it as we prolly all should. (and put a lid on the lawyers who feed off the victims)
  56. Replies
    137
    Views
    21,897

    Re: How to rig an X595 to mow in reverse

    The dealer has liability if they don't fix the safety features.. and will charge for doing the work.

    Just put it back to original before taking it back in for dealer work.
  57. Replies
    10
    Views
    1,044

    Re: 54" mower deck

    gc
    Is this the part you want? part # 157142
    John Deere Deflector Shield - M157142
  58. Replies
    14
    Views
    678

    Re: John Deere 1026 Belt problems on deck

    Any pics to post to show what you have?
  59. Replies
    137
    Views
    21,897

    Re: How to rig an X595 to mow in reverse

    With the mower deck removed, look underneath to find the switch that is activated (opened or closed) when the reverse pedal is depressed.. move that switch so it is not activated by the reverse...
  60. Replies
    3
    Views
    310

    Re: need some specs 2320

    sisu
    Can you share those specs with others in TBN? Could be very helpful when others are looking for similar information in the archives.
    tks
  61. Re: how do I find out the year of JD crawler loader? I have serial number,

    Maybe this will help.
    TractorData.com John Deere 42C tractor information

    420C Serial Numbers:
    1956: 80001
    1957: 100001
    1958: 125001
    Final: 136795

    I used to own one, but it had a custom...
  62. Replies
    5
    Views
    345

    Re: Joh Deere 1948A

    When hitting on one cylinder, you know it without a doubt. :D

    Comes from personal recall of working with the A, B, G, H, AR, D, 50, 60, 70, 420, and model LA

    Love that 2-cyl sound..
  63. Replies
    5
    Views
    345

    Re: Joh Deere 1948A

    Phillip w: Yes, the A will run on one cylinder.. not well, but will run.

    Might suggest getting some compression test numbers to decipher the problem.
  64. Replies
    8
    Views
    721

    Re: JD 345 random engine stalls

    But eventually it will restart? Does this happen regardless of whether you do something? Any clue as to what might change that would allow it to restart?

    Hate it when these things happen...
  65. Replies
    16
    Views
    1,025

    Re: John Deere 410 - Shes got issues!!!! Help!

    Hopefully you went to the parts desk with more information than you disclosed in the OP. ;)

    You can look up part numbers at this link and go to the parts desk with model number, serial number,...
  66. Replies
    17
    Views
    2,418

    Backhoe Re: JD 110 TLB bucket control problems

    Couple projects there to get them moving again... ;)
  67. Replies
    16
    Views
    1,025

    Re: John Deere 410 - Shes got issues!!!! Help!

    :welcome: to TBN

    Sounds like a service tech manual is one of the first orders of business.. see there is an operator's manual on Amazon.. may also be other places too.
    What's up with your Deere...
  68. Replies
    3
    Views
    550

    Re: JD Model M clutch frozen

    Memory may be slipping, but believe those bolts are for mounting accessories to the housing..

    Don't still have my jd 420, but believe I used those bolts for a snow plow frame.

    Remove them and...
  69. Replies
    14
    Views
    811

    Re: 98 JD 1070 new owner!

    :welcome: to TBN
    You will find good help here, so stick with TBN.

    Make good use of the search engine here. Top right box there is "Google Custom Search". Click on that and enter the problem. ...
  70. Thread: New JD owner

    by beenthere
    Replies
    4
    Views
    478

    Re: New JD owner

    jay
    :welcome: to TBN as well.

    OMLVU28456

    Can also go to your Deere dealer and have them order you a paper copy..
    Can get a service tech manual that way as well..

    Enjoy
  71. Replies
    4
    Views
    657

    Re: 330 loses power

    Look into the fuel pump for the 330.. ( key #4) apparently a sub is AM876266. $250+ on GreenPartsStore, $110 on Amazon, and several other electric pumps listed with that part # for less than $25. No...
  72. Replies
    9
    Views
    478

    Re: JD2020 Hi/Lo shot

    :welcome: to TBN

    Hope you get some answers to your question.. sorry that I'm no help. Stopped production of the 2020 in 1971..
  73. Re: Gator shopping - advice 590 or wait for 835r

    I've a 4x2 gator, and the neighbor has an X8xx something.. His is a "pig" compared to the 4x2 for getting around, turning sharp, and handling without power steering. But the 4x2 only seats two...
  74. Thread: 1st gear

    by beenthere
    Replies
    6
    Views
    644

    Re: 1st gear

    :welcome: to TBN

    You can edit and/or reply to the first post.. no need to make up another new post..

    Hope someone who can decipher the 1st gear problem will chime in with some help. Seems...
  75. Replies
    7
    Views
    2,029

    Re: 4300 Hour Meter blank

    :welcome: to TBN "malbert"

    Thanks for posting and letting us know the fix, and thumbsup :thumbsup: to find the solution and getting it to work.
  76. Backhoe Re: Installing backhoe after Jd 1023e purchase

    Have to wonder if Lance1 had any issues with installation.. has not returned since his post three weeks ago.

    Hope it all went well and Lance will post some pics and comments after the install...
  77. Replies
    32
    Views
    1,673

    Re: John Deere Technical Manual Issue

    Seems it is a customer choice.. pay the dealer $150 an hour to sort out the problem, or get a service manual and try to sort out the problem in the comfort of your own shop (with the valuable TBN...
  78. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Update.
    2nd replacement fuel sender unit (pump and fuel level) rec'd and tested to be ok.
    1st one going back under warranty.
    Many thanks for the help and discussion provided here.
  79. Replies
    46
    Views
    3,237

    Re: 3038e Brakes and Ground Yellow Jackets

    There are tasty morsels in there, and would expect skunk or raccoon, or could be even bear, badger, ferret, or weasel..
  80. Replies
    13
    Views
    844

    Re: 5093E cab A.C. question

    How much to tint the windows?
  81. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Richard
    As Spanner posted, think I'll continue with the replacement and "hope" that this isn't a genuine mismatch of the electronics communication and the fuel level gauge.
    If the pics of the...
  82. Oil & Fuel Re: Substitute for JDM J20A, or Hyguard, or Quatrol...

    "Picked it up for a song" then for sure I'd go with best fluid you can. If there is an eventual problem, at least you can say for sure it was not the fluid that you found cheap.. again, just my...
  83. Replies
    7
    Views
    883

    Re: Adjusting mower deck height

    The operating manual for the D155 is pretty straight forward with the two methods to set up the deck. Using the blocks, is what you are doing.
    Don't understand why you would go to different size...
  84. Oil & Fuel Re: Substitute for JDM J20A, or Hyguard, or Quatrol...

    Wouldn't be taking any such chances on my watch.. Oil is cheap compared to the possible repair bills. IMO
  85. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Couldn't just leave the fuel gauge problem alone, pulled off the fender deck today to lift out the new pump to inspect for free movement of the float. Looked to be free so put it back in the tank...
  86. Re: loader availability options for a john deere 790.

    I'd maybe buy another 790 with the FEL, and keep the 790 that is the best of the two, sell the other w/o FEL
  87. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Spanner
    Took a pic of the filter sock under a light magnifier, and found very little debris.. looks like some fine fibers or threads.
  88. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Spanner
    Thank you, and others, for your help and following this along with advice.
    The seat and deck are back on.. my fault for not checking the fuel gauge before putting the parts back on.. was...
  89. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    The disconnected hose was within the fuel pump fuel gauge system.. came out with the old pump.

    Yes, this was the $307 fuel pump.. replaces the old system..

    This pic shows the hose disconnected...
  90. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Thanks

    The disconnected hose was within the fuel pump fuel gauge system.. came out with the old pump.

    Yes, this was the $307 fuel pump.. replaces the old system..
  91. Replies
    8
    Views
    2,400

    Re: JOHN DEERE 650 TRACTOR IDIOT LIGHTS

    avictor
    Same question in the other thread with good answers..
    http://www.tractorbynet.com/forums/john-deere-owning-operating/386333-navigating-john-deere-online-parts.html
  92. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Pic 1..The old pump removed showing hose disconnected..
    Pic 2. Fuel tank 5-bolt hole with brass inserts
    Pic 3. New pump installed that works..

    Found out now that the new fuel gauge does not...
  93. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Monday came, and fuel pump still not transferred.. so waited until today. the 8 holes in the pump flange and gasket can be matched to the 5 holes/studs in the old tank. When pulling the old...
  94. Replies
    18
    Views
    1,336

    Re: 3320 FWA problems

    quote from operators manual...

    Is this what you are calling FWA ?
  95. Loader Re: 1981 JD650 Loader Mounting bolt location/size

    Maybe some pictures of what you are faced with would help with some answers.

    Can find the loader brackets for the model 60 Deere loader that goes on the JD 650..
    John Deere - Parts Catalog
    ...
  96. Replies
    18
    Views
    1,089

    Re: 3320 Hydraulics driving me crazy!

    Here is a link to some info on the hydro fluids, and mention of tranny chatter.. with what seems like a Deere product to modify friction.
    PMB Product:

    Not sure if it may help.
  97. Replies
    10
    Views
    837

    Re: X485 EFI Fuel Line Replacement

    Shot a pic of the X485 fuel line (now exposed) and wonder a couple things.. if they re-route the line direct to the filter on the right side.. (red line in pic). Would be shorter than shown switching...
  98. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    That sounds correct for this system as well... crossed fingers, as fuel pump on order but didn't get transferred to local dealer from sister dealer on Friday as planned. So have to wait for Monday.
  99. Replies
    10
    Views
    837

    Re: X485 EFI Fuel Line Replacement

    What is the s/n of the x485... above 40000 ? or below 40000 ?
  100. Replies
    48
    Views
    2,313

    Re: JD X485 fuel pump not running

    Will take some pics upon removal.. and I wondered about what the bolt screwed into.. maybe I'll get three brass inserts to put in when the 8 bolt fuel pump comes.. Hopefully tomorrow.

    Appreciate...
Results 1 to 100 of 5000
Page 1 of 50 1 2 3 4
© 2017 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.