Search:

Type: Posts; User: Kernopelli; Keyword(s):

Results 1 to 100 of 1775
Page 1 of 18 1 2 3 4

Search: Search took 0.13 seconds.

  1. Replies
    10
    Views
    348

    Re: Yet another stuck clutch (mt210D)

    These are just theories so take them for what they're worth....

    Since you've split the machine before, you might remember that the throw out bearing sits on a round hub that slides back and forth...
  2. Replies
    46
    Views
    7,404

    Re: mitsu D2650FD...gettin' started

    Well, I got my new pump and what a difference in speed! I didn't have to make a spacer plate for my MTE2000D, but did have to add an extra washer on each suction/ pressure line bolt. The pump is...
  3. Replies
    19
    Views
    1,925

    Re: any toro groundsmaster fans on here?

    Nice rig!! I was thinking about you today. I was driving by the local golf course and saw a 580D that they took out of service and it has been sitting outside their maintenance shop for several years...
  4. Replies
    79
    Views
    11,775

    Re: Dig-It towable Backhoe partial restoration

    Well, I'm back to rebuilding cylinders on my model 158. I have mentioned in several different TBN post that the gland nuts can be almost impossible to remove. On this most recent rebuild, I have...
  5. Re: Rear 3pt FEL, where can I get one like this

    I used a dirt scoop for 5 years before building my FEL. Very handy for simply scooping and moving material. I still use it when I'm moving dirt or gravel any distance. It makes a good counter...
  6. Replies
    46
    Views
    7,404

    Re: mitsu D2650FD...gettin' started

    I am excited, at least on a certain level. Recently my 21 yr. old son was using the loader to move some large logs and the shaft seal blew out of my hydraulic pump....which consequently filled the...
  7. Replies
    22
    Views
    11,568

    Re: Zen-noh ZL2201 (Kubota L2201) Questions

    Try Kubotabooks.com The 2201 isn't listed but you may find a similar enough model there
  8. Replies
    1
    Views
    326

    Re: 843L? What is it used in?

    Looks like the NH G6035/MC35/ Shibaura 314 and Hustler 3700 mowers ( which are all the same basic machines), NH TC35 tractor and Case DX35 all used it. Found a post here on TBN saying the N853L is a...
  9. Re: Tractor no. 15 !! It will be Cat yellow and have TRACKS !

    I know you mentioned it in a previous post but I just got my new issue and thought it deserved sharing. Also want to mention that Farm Show offers a "free issue" for those not familiar with their...
  10. Thread: DIG-IT 198T

    by Kernopelli
    Replies
    3
    Views
    237

    Re: DIG-IT 198T

    I have a Dig It 158 and I too believe it is a Bradco hoe. The boom looks identical to a model 8LD. I have been buying parts from Heartland Construction Equipment Dig It Parts - HEARTLAND CONSTRUCTION...
  11. Re: Need Info about these items on MT2201D Mit

    By "crank like", are you referring to "B"? That is the diff lock pedal. On My 2000D, the dipstick is located on top of the trans case. In the OP's pic, it is the filler located between "C" and "D"....
  12. Replies
    7
    Views
    696

    Re: Shiraura D23F lost 4wd

    Well, I hate to make suggestions that have you chasing ghosts. I have to think it is unlikely that your ring gear was only used in one model when they have produced so many similar sized machines....
  13. Replies
    7
    Views
    696

    Re: Shiraura D23F lost 4wd

    I have read that the NH 1720 is a pretty good crossover to your machine. New Holland Parts - Best diagrams, pricing and service! The 1720 and 1920 use the same gears and under the 1920 the pinion is...
  14. Re: Tractor no. 15 !! It will be Cat yellow and have TRACKS !

    Hey, Just got my new issue of Farm Show Magazine. Saw you in it with your 1/2 scale JD. Sweet!!!!
  15. Thread: Mowercycle

    by Kernopelli
    Replies
    20
    Views
    1,964

    Re: Mowercycle

    I love old bikes but I REALLY love seeing supermoto's on the street! I want to see your Husqvarna!!! I would like to have a KTM 500 EXC with an extra set of street tires/rims to swap back and forth...
  16. Replies
    1
    Views
    540

    Re: Shibaura SB1500B Problem

    Sounds like low compression, I would do a compression test and go from there.
  17. Replies
    4
    Views
    409

    Re: International 244

    I have never owned an IH244 but it is a Mitsubishi made tractor and is basically the same machine as a Mitsubishi MT180/ MTE1800....those models I'm familiar with. I have only seen a strainer on the...
  18. Replies
    2
    Views
    201

    Re: AC 615 ind tractor

    A quick search of AgcoParts didn't show a pump and neither did a pump search for a 615. I would pursue finding a pump by Googling what other A.C. models used a D2200 ( looks like some HD4's and 175...
  19. Replies
    5
    Views
    1,129

    Re: Ford 1910 Clutch Alignment Tool

    I have never owned an alignment tool. I either turn a wood dowel down to the correct steps in diameter or use a dowel that is already the diameter of the small end and wrap tape around the dowel to...
  20. Replies
    7
    Views
    544

    Re: Ford 2120 shift fork worn

    I just looked on New Holland Parts - Best diagrams, pricing and service! and it appears all the shift forks are available and range from $60-$100 depending on which fork you need. As far as type of...
  21. Replies
    4
    Views
    804

    Re: k3d mitsubishi diesel engine

    Any small pump should be sufficient. Volume is the main thing but I will say even the low pressure (3-5 psi) inline fuel pumps will be all you need. Available from any auto parts store or you can...
  22. Replies
    46
    Views
    4,735

    Re: A favor to your angle grinder

    Before buying a plasma cutter I used my grinders for almost all cutting I had to do. I realized the gear grease issue on my last two Dewalt grinders. Despite keeping grease on the bevel gears I...
  23. Replies
    1
    Views
    294

    Re: satoh s650g bison

    I would contact the guys at Valley Power . They are probably the top Satoh experts in the country. Very nice people and will be willing to discuss your issues. Also, Japanese Tractor Repair Dixon, IL...
  24. Replies
    9
    Views
    579

    Re: Mitsubishi KE75 engine

    I cant help with pics or a manual but I suggest you post this in the Iseki forum below. I know there are several people with Bolens G174 or TX1500 model Isekis that hang out there, I'm sure someone...
  25. Replies
    5
    Views
    738

    Re: YM240 double tires

    I'd like to come see them sometime. I usually have Monday, Wed, Thurs. days or Fri, Sat, Sun. evenings available. What are we talking as "trade material"? I don't normally trade away guns, tools or...
  26. Replies
    5
    Views
    738

    Re: YM240 double tires

    What size tires? I'm in the neighborhood and might be interested. Are you by chance "Dave's Custom Gunsmithing" ?
  27. Replies
    1
    Views
    969

    Re: Help with L3E engine

    I usually use NCW Tractor Parts & Tractor Supply Store - Compact Tractor Parts for parts. They don't list the parts on their site but I'm sure they can quote you a price. $200 for a piston and rings...
  28. Re: Kubota HST Solenoid Connector Broken Wire - $2300 skinning

    Ditto on checking the agreement. The place I usually rent from includes insurance on their equipment rental agreement. I did some serious damage to a large tiller years ago and they didn't act upset...
  29. Re: cub cadet 7274 turned over, but now will not move?!?!??

    Try Dennis at 931 863 4229 ( TBN member dogpatch06 recently purchased a K3G from him and is very pleased) or Bruce Laten at 931-492-0316. They may have /or can get a K3M
  30. Re: Power steering leak Mitsubishi MT 250 D

    Your 250 power steering relief pressure should be 1490PSI and the valve should be factory set at that pressure. The relief valve is located directly above the steering box housing and sandwiched...
  31. Replies
    4,531
    Views
    844,091

    Re: Harbor Freight Tools that don't suck

    Yeah....a free $5 is nice but not worth the hassle at this point. I just looked and they are showing a 25% off coupon on their homepage right now. Funny thing is, yesterday they showed a 20% coupon...
  32. Replies
    4,531
    Views
    844,091

    Re: Harbor Freight Tools that don't suck

    CRUD! A day late and a dollar short......story of my life! Yesterday, I ordered their 115 psc set of carbide drill bits. Reg. $130 but I got 20% off the $99 sale price...not bad but I'll take 25% off...
  33. Thread: D2650fd

    by Kernopelli
    Replies
    1
    Views
    701

    Re: D2650fd

    The only Mitsubishi engine I've personally known of that was designed that way was a Mitsubishi S4S-D in a Montana 5740. I have never had the pan off a K4E but maybe it is of that design too....
  34. Replies
    1
    Views
    276

    Re: mitsubishi 2650d 4x4

    I assume it was running fine and then sat for 7 months...... can't be much wrong with it. I would make sure you have a strong battery....cranking speed is important. Make sure you are getting fuel at...
  35. Re: 4 Cylinder Mitsubishi diesel won't start.

    Excellent....glad you got her going and able to do so with little expense!!
  36. Re: 4 Cylinder Mitsubishi diesel won't start.

    This is a good point...he said he checked the glow plugs but didn't go into detail. My current Mitsubishi is also very sensitive to temp. Warm/hot temps outside and she fires right up. 40 degrees and...
  37. Re: 4 Cylinder Mitsubishi diesel won't start.

    You are getting fuel to the injectors and the engine is turning over at the key, this rules out any safety switches, fuel shut off, need to bleed fuel system, etc. You already have checked much of...
  38. Replies
    3
    Views
    461

    Re: Cofle Joystick Control Cable

    Check out this thread here on TBN. http://www.tractorbynet.com/forums/parts-repairs/179597-fel-joystick-control-cable-repair.html Rob Liefveld ( 3RRL) is a great guy and very talented.... retired...
  39. Replies
    3
    Views
    461

    Re: Cofle Joystick Control Cable

    Can't find the part online but there are a fair number of forum posts concerning Cofle cables breaking and some home made repairs for them. Did yours break at the white plastic cable end? Google...
  40. Replies
    13
    Views
    2,873

    Re: Mitsubishi K3G engine

    I'd give Bruce Laten a call again. That's going to be a hard engine to find. He may not have one in stock but he helped me with a K3F ( probably rarer than the G model) engine a while back, it took...
  41. Thread: MT-250D

    by Kernopelli
    Replies
    1
    Views
    706

    Re: MT-250D

    I don't know of an online diagram. I suggest that every tractor owner have a service manual for his machine. The I&T shop manual for Mitsubishi MT160-MT300 models covers most all repairs and has...
  42. Replies
    6
    Views
    372

    Oil & Fuel Re: iseki no start

    Since you've checked the valves, you would have noticed if it had a decompression system....they usually just hold an exhaust valve open. Most safety switches are either going to cut power to the...
  43. Replies
    1
    Views
    425

    Re: Ford 1920 power steering cylinder

    New Holland Parts - Best diagrams, pricing and service! has one
  44. Replies
    9
    Views
    952

    Re: 4 wheel drive will not engage

    I am a little confused by what you are referring to as rear drive shaft. The rear tires are driven from the rear of the transmission. Your rear differential is located in the transmission case and...
  45. Thread: cutting oil

    by Kernopelli
    Replies
    26
    Views
    1,988

    Re: cutting oil

    I used to use any oil I had on hand. I figured something was better than nothing. I recently started using Tap Magic and I am sold on it. Liberal amounts of spray lubes or oil helped, especially to...
  46. Replies
    48
    Views
    7,163

    Re: 24hp tractor at northern tools

    I assume the NT's are still Jinma made. I had a Jinma 284 and it was a surprisingly good tractor in many ways.... lots of power, heavy for a 28hp compact,etc. However, it just wasn't the quality of...
  47. Replies
    2
    Views
    265

    Re: 245 steering issue

    Go to AGCO Parts Books ( enter as "Guest User"), you can see a parts diagram of the steering valve etc. It will give you an idea of what you will need to do.
  48. Replies
    3
    Views
    1,939

    Re: Bradco Stabilizer Cylinder - Need advice

    I have the same cylinders and I have yet to get a gland nut loose. On the first cylinder I needed to rebuild, I gave up after making a 2 pin spanner wrench out of 1" square stock and put a 4' handle...
  49. Replies
    5
    Views
    468

    Re: Need Front Diff Shaft for Satoh S370D

    Cant give you a parts number but I did see that Valley Power has a 370 parts diagram on their website.....can't imagine they don't have a part no. for it. Looks like the LH/RH shafts are identical,...
  50. Re: Farmtrac 36 HP 2002 4wd -Will shift into forwar & reverse, but won't move and gr

    Sounds like classic symptoms of a worn clutch but that is usually a slow oncoming issue......gear grinding, slipping in high gear or high range etc. To happen so suddenly, as Whis said, it sounds...
  51. Replies
    9
    Views
    952

    Re: 4 wheel drive will not engage

    I read your first post about this problem and I suggest you start with the easiest things. As Matt2778 said, check the coupler sleeve that slides on the ends of the drive shaft. You may get lucky and...
  52. Replies
    5
    Views
    534

    Re: Help for a Yanmar ym155D

    "Plugged battery in wrong"....... I'd be looking for blown fuses
  53. Replies
    1
    Views
    312

    Re: Hinomoto E2304

    Id start with Southern Global
  54. Re: JD LX172 front axle assembly came loose. What's involved in re-mounting?

    go to John Deere - Parts Catalog and enter the model. They have diagrams of the front axle.
  55. Replies
    22
    Views
    1,221

    Re: Anyone know what sort of link this is?

    Not seen one in years but they seemed very common when I was young.....they're used to repair or join chain(s).
  56. Replies
    1
    Views
    5,227

    Re: wich ford newholand is the d235f

    I don't know that either are a true crossover. I assume the D235 is a 23.5 PTO HP tractor which puts it right with the 1720 ( 23.5 PTO HP/ 28 engine HP). The 1720 also uses a 3 cylinder like the...
  57. Re: Need help finding an lower oil seal on a 21 hp Mitsubishi Diesel engine

    I am not a Mitsubishi "expert" but I have never heard of an "R" series diesel in their engine line. Are you sure that your engine isn't a Mitsubishi K3D instead of an "R3D"? The K series is an older...
  58. Re: how to install hydraulic pump kubota b7100 whith loader b1630

    I am certain it is a pricey issue. Kubotabooks.com has a very good parts diagram and shows HST component parts.....hope it helps.
  59. Thread: lscs1980

    by Kernopelli
    Replies
    1
    Views
    235

    Re: lscs1980

    Sounds like you have a governor issue. You can look at a parts diagram of it to get an idea of how it is constructed here Kubotabooks.com
  60. Re: hydraulic cylinder repair. Can't remove the gland nut.

    Thanks for the responses!

    It isn't threaded.....or at least I don't think it is ( I've yet to get one apart). I have tried tapping the gland "IN" but it won't budge.

    JJ: The "head" ( bent...
  61. hydraulic cylinder repair. Can't remove the gland nut.

    I have leaking seals on a backhoe cylinder and can not get the gland nut loose. This is the second time I've had to rebuild one of these cylinders and on the first one, the gland nut never came...
  62. Replies
    7
    Views
    891

    Re: Broken Tie Rod End.

    Good deal. Funny how the smallest problems can cause so much work! It's always a good feeling to get a problem fixed and behind you.
  63. Replies
    5
    Views
    394

    Re: Kabota L2600DT Wont Egage Front Axel

    Glad you got her going so quick!
  64. Replies
    5
    Views
    394

    Re: Kabota L2600DT Wont Egage Front Axel

    I would go to Kubotabooks.com and look at the parts diagrams. There is a roll pin on the 4x4 engagement lever, coupling collars on the propeller shaft and an "L" shaped shift lever that slides the...
  65. Replies
    426
    Views
    161,557

    Re: Show What Tool You Made*

    Using the pipe flange is brilliant! Nice, heavy ( and easy) way to make a locking pivot......great idea!!
  66. Replies
    7
    Views
    891

    Re: Broken Tie Rod End.

    I looked at AGCO parts ( AGCO Parts Books enter as "guest") on the Massey 1240 and 1250 ( figured they were probably the closest models to the TA247. Looks like the tie rod is only threaded for the...
  67. Replies
    4
    Views
    383

    Re: Mitsubishi Hydraulic pump

    Depending on which pump you need.

    Hydraulic pump: I'd check with NCW Tractor Parts & Tractor Supply Store - Compact Tractor Parts

    Injector pump: I'd try taking it to a local shop that does...
  68. Re: Deutz-Allis 5220 power steering doesn't work

    I cant say for sure on pump pressure but I would expect it to be somewhere between 1500-2200psi. I'd check pressure at the cylinder ( sounds like you already suspect there's not much there) then as...
  69. Replies
    8
    Views
    1,481

    Re: Can Anyone ID This Engine?

    Can't answer whether to sell the engine or buy the tractor. I would consider buying his if the price was right and I thought I could justify having two machines or could make some money.
  70. Re: Deutz-Allis 5220 power steering doesn't work

    Looking at the parts book ( AGCO Parts Books Enter the site as "guest"), I don't see where it uses a separate power steering pump. It has a flow divider valve so I assume it only uses one pump. If...
  71. Replies
    8
    Views
    1,481

    Re: Can Anyone ID This Engine?

    Pretty sure it will fit the 1310. Parts search show the 1210 and 1310 use the same crank. Probably means same block with different bore.
  72. Replies
    2
    Views
    553

    Re: Clutch seems like its low on fluid

    That model doesn't have a hydraulic clutch so there isn't any fluid to check ( just shared trans/ hydraulic fluid shared in the transmission. You may need to make an adjustment on the pedal. Follow...
  73. Replies
    8
    Views
    1,481

    Re: Can Anyone ID This Engine?

    Looks like you have a TX model Iseki ( TX1300 or TX1500?). Depending on model or year it should have a Mitsubishi KE70 or KE75 2 cylinder or a K3A or K3B 3 cylinder. I do believe the "spare" engine...
  74. Replies
    26
    Views
    6,586

    Re: Iseki G192 TS1910 19

    Glad it worked. Cartersville/Carterville.......My son pulled a horse trailer down to Macon last week and he got home and was talking about Cartersville GA. Used to drive through your area myself 1-2...
  75. Replies
    26
    Views
    6,586

    Re: Iseki G192 TS1910 19

    Here is a link to Google PDF diagrams and directions on bleeding a 1910....
  76. Buying Advice Re: Iseki TA 550f repair, service manual needed

    Parts manual is available for the TA550f here Iseki Tractor Manuals, Iseki Parts Manuals, Iseki Repair Manuals, Tractor Manuals

    You may want to do some further investigating but I think the Massey...
  77. Replies
    11
    Views
    828

    Re: HELP! Mitz 1601d lost hyd. power

    If you have quick disconnects on/or to the loader valve, take them off and reseat them. They are notorious for causing problems. If that doesn't fix the issue, you need to decide if it is a bad pump...
  78. Replies
    1
    Views
    298

    Re: Mitsubishi MT 372 tune up ?

    Here is a thread concerning MT372 glow plugs.http://www.tractorbynet.com/forums/mitsubishi-satoh/118518-help-glo-plugs-mt372.html First check your current plugs and make sure they need replaced. I...
  79. Replies
    1
    Views
    304

    Re: mitsubishi mt2801 timing marks

    I scanned the injector pump section from my I&T service manual, hope it will help.
  80. Replies
    10
    Views
    848

    Re: Yanmar ym2000d dual wheels

    http://www.tractorbynet.com/forums/yanmar/195084-frivolously-productive-afternoon.html?highlight=duals
  81. Replies
    15
    Views
    1,272

    Re: Tips to modify / solder a brass radiator

    I cant give any good advice on finding the material you need but I have soldered a radiator before. Yes, I simply used the solder I had on hand that I normally used for sweating copper. I've used...
  82. Re: New holland TC29 steering help needed also hour meeter dont work

    Probably would help to use heavier fluid but it's just a bandaid fix. If hot fluid is truly the factor, you have wear in one or more places...the pump, the steering motor valve or the cylinder ( or a...
  83. Re: New holland TC29 steering help needed also hour meeter dont work

    First thing I would do is check the filter on the steering pump. If it has been a long time since changed, that could be the problem.... no/ or little fluid flow back to the pump. If the flow is...
  84. Replies
    40
    Views
    3,705

    Re: What would you do with this ?

    Somebody mentioned wheel spacers......I went up a size on rear tires and thought I was going to have to space them to clear my FEL subframe. I made a set of spacers out of similar pipe flanges (I...
  85. Replies
    1
    Views
    285

    Re: Deutz-Allis 6080

    Can't say about min. pressure but hydraulic diagrams are probably available at AGCO Parts Books . Look at the 6080 model under AGCO-Allis
  86. Replies
    3
    Views
    529

    Re: Iseki TA 287 Grill

    I would check tractor salvage yards (Google tractor salvage). If I couldn't find an Iseki grill, I'd check the Massey Ferguson line. They are styled a little differently and usually grey but that's...
  87. Re: Sheared steering sector on Kubota L2600DT

    hard to believe Kubota only used that part on one model. I would try to cross reference it to see others used that same part, then look for those parts machines. Searching the by the part # in Google...
  88. Replies
    25
    Views
    12,984

    Re: Mitsubishi D-2050

    I don't have PS on my Mitsubishi but do have a orbital valve and steering cylinder I have been waiting for time to install.

    I am curious what type and/or brand of PS valve you have. Is it an...
  89. Re: Sheared steering sector on Kubota L2600DT

    I would check prices on a salvage part http://www.tractorhouse.com/list/dismantledsearch.aspx?ETID=3&Manu=KUBOTA&Mdltxt=L2600DT&mdlx=exact
  90. Replies
    9
    Views
    1,924

    Re: '79 ford 1700 4x4 front axle snapped

    Parts catalog shows the 1700 and 1900 share front axle/parts. The 1500 shares front axle/parts with the smaller 1300.
  91. Replies
    7
    Views
    645

    Re: Tractor Salvage used parts

    http://www.tractorhouse.com/list/dismantledsearch.aspx?ETID=3&Manu=FORD&Mdltxt=8210&mdlx=exact
  92. Replies
    826
    Views
    350,483

    Re: Tractor backhoe - homemade

    BFeaky, I had assumed your "little green tractor" was a Ferrari. Is it a Hittner? I see the Hittner's use Lombardini diesels also....probably was developed after the Farrari's.
  93. Re: is it fixable or do you need parts, parked 10 yrs after loader connect pins broke

    Sounds like you're almost there. I will guess that bleeding the fuel system will be key to getting it started at this point.....if it was running good before, it should start pretty easily with new...
  94. Replies
    5
    Views
    634

    Re: Kubota L275DT

    There are some free manuals for similar models here Kubotabooks.com. For exact model info, I'd check Ebay or Amazon
  95. Replies
    4
    Views
    594

    Re: Jinma 284 - 3 pt. lift not working

    I owned a 284 for awhile but don't remember much about the hyd system. I would check any quick connects..... take them off and reseat them, they are notorious for appearing seated when they aren't. ...
  96. Re: is it fixable or do you need parts, parked 10 yrs after loader connect pins broke

    Yes. I don't think you have to stick with just that though. I often get Rotella 15W-40W but there are a number of good diesel formulated oils out there and I'd probably not get hung up on what brand...
  97. Re: Engagement/Disengagement of differential lock Satoh 650g

    All of the Mitsubishi related (Satoh) tractors I've owned were push and hold. You always want to have the machine stopped before engaging.
  98. Re: is it fixable or do you need parts, parked 10 yrs after loader connect pins broke

    One other clue to narrowing down what model it is might be tire size. Pretty sure the 1900 and 2100 are slightly smaller frame/ general dimensions than the 2300 and 2500. I believe the 1900/2100 used...
  99. Re: is it fixable or do you need parts, parked 10 yrs after loader connect pins broke

    To answer one of your questions....the bell housing should be dry. As far as fixing the pins, it is cast and not easy to weld correctly.....but I think if you find the right guy, they can be fixed....
  100. Re: is it fixable or do you need parts, parked 10 yrs after loader connect pins broke

    That is quite a gift! No way in the world I would take it to the scrap yard!!! I am curious about the broken "pins" on bell housing ....not sure what that is. Can you post picks of the broken parts....
Results 1 to 100 of 1775
Page 1 of 18 1 2 3 4
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.