Search:

Type: Posts; User: Kernopelli; Keyword(s):

Results 1 to 100 of 1828
Page 1 of 19 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    1
    Views
    813

    Re: Just got Iseki TS3510

    I am going to guess it might crossover to a White 2-30 or 2-35 model ( possibly a Bolens 292 as well) so you might check that avenue. Len Scheaffer would probably be your best bet on an Iseki manual...
  2. Re: Sheared the Lower Lift Arm Cross-Shaft (MT180D)

    Can probably be repaired by a local welding or machine shop or I feel pretty comfortable in saying that the lower link attachment can be replaced with one for a Case IH 235. Mitsubishi made their...
  3. Replies
    3
    Views
    679

    Re: Need Ford 1200 front differential

    You are more than welcome. I too feel a small tractor is a must and agree with you on new machines.....It gets really hard for me to justify a new machine when the only real advantage comes down to...
  4. Replies
    2
    Views
    618

    Re: CM224 vibration

    Not familiar at all with your machine but if you don't have a service manual, I'd look at parts diagrams to try and get a better feel on possible culprits. Try New Holland Parts | Buy Online & Save
  5. Replies
    3
    Views
    679

    Re: Need Ford 1200 front differential

    You will probably have to go with salvage parts.

    Salvaged Ford 1200 equipment for used parts | All States Ag Parts
    ...
  6. Re: NEED PARTS FOR A TX1300F G154 BOLENS ISEKI

    Bolens parts

    Used Bolens G154 tractor parts - EQ-20067 | All States Ag Parts

    http://www.japanesecompacttractor.com/default.htm
  7. Replies
    5
    Views
    814

    Re: Can't get flywheel off Deere L118

    I would go to Harbor Freight or similar tool supply, buy a cheap gear puller and give it a go. As mentioned in your other post, you can make a puller from heavy flat stock, drill two bolt holes that...
  8. Replies
    3
    Views
    679

    Re: Can't get the flywheel off

    I would attach a puller. There are probably a couple of bolt holes on the flywheel to attach it to. If the puller alone wont break it free, keep tension on the flywheel with the puller and tap the it...
  9. Re: Let's post our Made in USA tool finds (yard sales, old store stock, auctions etc)

    Sorry, no pic right now but I just picked up a Dake 25H hydraulic press for $150. Needs sandblasted and new paint but otherwise is in great shape. What a beast and a great example of American made...
  10. Replies
    82
    Views
    8,058

    Loader Re: ColdWater tractor loader install

    Might want to check this out... I don't know what the "qualifications" are but there is subsidy money available for ROPS retrofit in PA. ROPS Retrofit Program for Pennsylvania Farmers
  11. Replies
    1
    Views
    457

    Re: MF205 = Hinomotoe18 4wd engagement

    Look at the parts diagram at AGCO Parts Books and see if it helps.
  12. Replies
    28
    Views
    4,621

    Re: Need help fixing my tractor

    Glad you figured it out. When I read what happened, I remembered I too have had the same issue. The good news is it is likely an easy fix, on mine s the "pin" broke on the end of the lever that...
  13. Replies
    7
    Views
    1,058

    Re: Trying to find a Yanmar ym336D engine

    I always recommend TBN member "Bruce1966us" . Bruce Laten is located in Lynchburg TN and I have always felt his engine and shipping prices to be the best around. His number is 931-492-0316. He...
  14. Replies
    88
    Views
    10,257

    Re: Good Bench Vise Recommendations

    I have a Yost 33C I picked up at a yard sale for $25. A truly excellent old vise that after owning it, see it would have been a bargain if I had paid 10 times more for it. The only thing that would...
  15. Replies
    28
    Views
    4,621

    Re: Need help fixing my tractor

    You stated "...........including having a new hub machined that holds the throwout bearing." I too had a worn TO bearing release hub on my MTE2000D and I had to machine a new one. Are you sure the...
  16. Replies
    7
    Views
    5,353

    Re: Ditchwitch J20

    I had an old lever steer too, just needed new points and paint. Bought it locally on Ebay for $120......definitely one of my better auction purchases.
  17. Replies
    10
    Views
    2,003

    Re: Need to build CNC plasma cutting table.

    Might want to check this out. TECHNO PLASMA CUTTING SYSTEM (AS248) - GovDeals.com

    A used 5x10 table that comes with a Powermax 85 would be a real running start on "building" your own. If you are...
  18. Replies
    2
    Views
    492

    Re: Wanted: Parts Tractor

    Looking at AGCO Parts Books the mounts on the FB31 use a different part # than the FB21 but they appear identical and some of the component parts have the same #'s as the FB21. Not telling that you...
  19. Replies
    3
    Views
    1,219

    Re: Bison 650G steering box

    Only way I see to drain it w/o taking the box off is by taking the steering shaft or sector out. You could then suck it out and dry with a shop towel. I don't have a Satoh but the 650G's box diagram...
  20. Replies
    0
    Views
    1,026

    Terex 72-31 MP2-U

    Looking at an old Terex 72-31 MP2-U. Cant find much info on them. I am wondering what the differences were between the AA, BA and MP2-U models? I assume the BA is a newer model than the AA and the...
  21. Replies
    195
    Views
    18,463

    Re: The day the music died.

    Almost feels like the death of an old friend. Netflix has an excellent documentary "The History of the Eagles"... One of the best things I've watched in ages!
  22. Replies
    80
    Views
    8,800

    Re: Outrageous shipping. Rant

    Onmi Gear is a company that makes mower gearboxes and speed reductions that are used by a number of equipment manufacturers. I was ordering an OEM right angle gearbox for a Bush Hog ZTR. Of course,...
  23. Replies
    80
    Views
    8,800

    Re: Outrageous shipping. Rant

    Just tried ordering an Omni Gear Gearbox online from German Bliss. Shipping came up to $75.87 at checkout (shipping Wt. is only 12LBS)! I called and questioned the high SH price and they gave me a...
  24. Replies
    2
    Views
    1,574

    Re: TL 2501F not moving

    At first thought, it sounds like the transmission is over filled and you either have an issue with a slipping clutch or a shift fork isn't engaging the gears properly.

    Im not familiar enough with...
  25. Replies
    12
    Views
    2,061

    Re: Yanmar 2200 head

    I think you could probably find a replacement engine cheaper than just the head. I always recommend TBN member "Bruce1966us" . Bruce Laten is located in Lynchburg TN and I have always felt his engine...
  26. Replies
    9
    Views
    2,150

    Re: Texas tractor 4 sale

    I watch a lot of Government auctions. There are some great deals to be had but you have to watch religiously. Earlier this year I bought 10 Carter Hoffman heated food carts off GSA Auctions for $5...
  27. Replies
    5
    Views
    682

    Re: Satoh S630D 4 wheel drive issues

    Valley power has a parts diagram that may help Valley Power
  28. Thread: Need Help

    by Kernopelli
    Replies
    2
    Views
    1,374

    Re: Need Help

    West KY Tractor Parts has a 1601 parts tractor currently listed, might try them. West Kentucky Tractor Parts If they cant help, you might try Len Sheaffer Sheaffer's Town & Country Tractor
  29. Replies
    3
    Views
    1,140

    Re: EBay Store JeffCube Kudos

    I agree, I've bought several clutch kits from his Ebay store and always been very pleased with the product, price and buying experience.
  30. Replies
    3
    Views
    866

    Re: WTD: starter for SUZUE M1503D

    The K3m was a pretty common engine and was used in Cub's 7300/7305, Mitsubishi MT300 and CIH 275 models. DB Electrical - NEW STARTER for CASE 265 275 TRACTOR, CUB CADET, TORO, MITSUBISHI
  31. Replies
    2
    Views
    815

    Re: MF205 Parts Source(s)

    Id try Parts for Massey Ferguson 205 tractors | All States Ag Parts
  32. Replies
    1
    Views
    396

    Re: looking for parts

    I'd contact Summit Supply. They carry tracks and ( pretty sure) undercarriage parts for the KH027 Kubota rubber tracks and undercarriage parts
  33. Replies
    6,175
    Views
    1,210,295

    Re: Harbor Freight Tools that don't suck

    I have been very pleased with their digital torque adapter. 1/2 In Drive Digital Torque Adapter Comes in a nice sturdy case, you can toggle it to read in NM, In/Lbs or Ft/Lbs and can be used with...
  34. Replies
    3
    Views
    917

    Re: Fencing Rig/Small Log Forwarder

    I have very limited experience with trenchers but I think you have a much more capably machine with your Maxxum. I bought an old Ditch Witch J20 on a No Reserve Ebay auction.I got it for $125 from a...
  35. Replies
    4
    Views
    478

    Re: 4 cyl Ford Ind.exhaust repair Bobcat

    Wow, a net search doesn't find anything. You may have to consider something like this http://www.tractorbynet.com/forums/iseki/196498-exhaust-repairs.html?highlight=manifold
  36. Replies
    91
    Views
    11,907

    Re: Thumb in the table saw. Warning - pictures

    I had the same injury about 25 yrs. ago. I was a meat cutter for 20 yrs and did mine on a meat saw. I am sure the kerf on a band blade is less than a table saw so I probably had less...
  37. Replies
    36
    Views
    4,059

    Re: Oh I want this drill press

    My 21 yr. old son is a huge Keith Fenner fan and was inspired by his Sibley. He finally found one on Craigslist and just finished a full restoration on his old Sibley camelback drillpress. What a...
  38. Replies
    6,175
    Views
    1,210,295

    Re: Harbor Freight Tools that don't suck

    I often need a nut splitter at work. No one there even knew what I was talking about. I told the boss we could probably get a cheap one at HF. To my surprise, they apparently don't carry one. He came...
  39. Replies
    51
    Views
    13,846

    Re: mitsu D2650FD...gettin' started

    I purchased a used John Deere orbital steering valve and cylinder which I eventually plan on installing. A generally quicker/ easier route would be to buy one of Hoyes "generic" Yanmar kits and...
  40. Replies
    6
    Views
    631

    Re: Dual rear wheels??

    http://www.tractorbynet.com/forums/yanmar/195084-frivolously-productive-afternoon.html?highlight=duals
  41. Replies
    5
    Views
    740

    Current Ebay Yanmars

    Waiting to see what this 336D brings...... Yanmar YM336D 4x4 Tractor 33HP 474hrs Very Nice No Reserve | eBay

    Also see BidAdoo is selling several Yanmars in Washington State..... Looks like they...
  42. Re: looking for valves for Isuzu diesel engine 2AB1

    If you can't find them through Isuzu, I'd contact Engine Parts or Len Scheaffer Sheaffer's Town & Country Tractor . He can often times order parts from Japan
  43. Replies
    8
    Views
    798

    Re: Backhoe hose replacement

    If I am understanding everything correctly. It sounds like the easiest route would be to relieve the pressure on the cylinder, pull both pins, and slide the cylinder out a few inches to expose the...
  44. Replies
    2
    Views
    793

    Security & Theft Re: Lost Ignition Key

    Ignition key for Case, Cub Cadet, Kubota, Mahindra, Mitsubishi-Satoh, Part Number 32412: Amazon.com: Industrial & Scientific

    Pickup, Van & SUV Accessories | Vehicle Accessories | Case, Cub Cadet,...
  45. Re: 2" receiver welded into Mini-Excavator blade

    Nice Job Soto!



    Before I finally broke down and bought a plasma cuter, I used to use the blades Sodo described on my Skilsaw. Not as nice as the dedicated saws that have chip collectors but...
  46. Replies
    2
    Views
    460

    Re: YM2000 Yanmar Tractor

    I alwas recomend TBN member "Bruce1966us" . Bruce Laten is loated in Lynchburg TN and I have always felt his engine and shipping prices to be the best around. His number is 931-492-0316. He carries a...
  47. Replies
    7
    Views
    598

    Re: Toyosha alternative

    Here is a list of SAE sizes by number. Stamford Newage | Mecc-Alte | Marathon
  48. Replies
    7
    Views
    598

    Re: Toyosha alternative

    Gotta say, 50 HP is pushing it. There is no way that you need 50 HP for FEL and backhoe hydraulic demand on a machine that size. A 5-7 GPM/ 2500 PSI pump would handle all the loader or backhoe...
  49. Replies
    6
    Views
    2,273

    Re: Hinomoto e14d steering quit

    I'm going to bet it's the bearings in the steering box. There should be an upper and lower on the steering wheel shaft. They act like thrust bearings for the shaft and depending on which way the...
  50. Replies
    2
    Views
    319

    Re: Case IH 255 Electic PTO Clutch

    I would try to match it up with another brand. The first company that comes to mind is https://www.stens.com/ , they carry a number of aftermarket PTO clutches. On their website, you can go to Specs...
  51. Thread: allis 5030

    by Kernopelli
    Replies
    2
    Views
    430

    Re: allis 5030

    I know it can be hard to find parts for some of the Hinomoto, Allis Chalmers and Duetz Allis models. I'd give We are a Mitsubishi Satoh compac a call and see if he can get the U.S. unavailable parts...
  52. Replies
    7
    Views
    1,085

    Re: Yanmar YB 25 Excavator

    I'd give https://depparts.com/oem-parts/yanmar-parts.html a call and see if they can supply parts. Here are a couple of shop manual Yanmar Backhoe Excavator YB1200SS L YB25 L Workshop Service Manual...
  53. Replies
    5
    Views
    491

    Re: Cub Cadet used parts

    That looks like a tough one. I don't see a single 7264 salvage machine listed online. What parts are you looking for specifically?
  54. Replies
    10
    Views
    1,087

    Re: Yet another stuck clutch (mt210D)

    These are just theories so take them for what they're worth....

    Since you've split the machine before, you might remember that the throw out bearing sits on a round hub that slides back and forth...
  55. Replies
    51
    Views
    13,846

    Re: mitsu D2650FD...gettin' started

    Well, I got my new pump and what a difference in speed! I didn't have to make a spacer plate for my MTE2000D, but did have to add an extra washer on each suction/ pressure line bolt. The pump is...
  56. Replies
    59
    Views
    21,805

    Re: any toro groundsmaster fans on here?

    Nice rig!! I was thinking about you today. I was driving by the local golf course and saw a 580D that they took out of service and it has been sitting outside their maintenance shop for several years...
  57. Replies
    94
    Views
    19,350

    Re: Dig-It towable Backhoe partial restoration

    Well, I'm back to rebuilding cylinders on my model 158. I have mentioned in several different TBN post that the gland nuts can be almost impossible to remove. On this most recent rebuild, I have...
  58. Re: Rear 3pt FEL, where can I get one like this

    I used a dirt scoop for 5 years before building my FEL. Very handy for simply scooping and moving material. I still use it when I'm moving dirt or gravel any distance. It makes a good counter...
  59. Replies
    51
    Views
    13,846

    Re: mitsu D2650FD...gettin' started

    I am excited, at least on a certain level. Recently my 21 yr. old son was using the loader to move some large logs and the shaft seal blew out of my hydraulic pump....which consequently filled the...
  60. Replies
    22
    Views
    15,608

    Re: Zen-noh ZL2201 (Kubota L2201) Questions

    Try Kubotabooks.com The 2201 isn't listed but you may find a similar enough model there
  61. Replies
    1
    Views
    1,632

    Re: 843L? What is it used in?

    Looks like the NH G6035/MC35/ Shibaura 314 and Hustler 3700 mowers ( which are all the same basic machines), NH TC35 tractor and Case DX35 all used it. Found a post here on TBN saying the N853L is a...
  62. Re: Tractor no. 15 !! It will be Cat yellow and have TRACKS !

    I know you mentioned it in a previous post but I just got my new issue and thought it deserved sharing. Also want to mention that Farm Show offers a "free issue" for those not familiar with their...
  63. Thread: DIG-IT 198T

    by Kernopelli
    Replies
    3
    Views
    1,210

    Re: DIG-IT 198T

    I have a Dig It 158 and I too believe it is a Bradco hoe. The boom looks identical to a model 8LD. I have been buying parts from Heartland Construction Equipment Dig It Parts - HEARTLAND CONSTRUCTION...
  64. Re: Need Info about these items on MT2201D Mit

    By "crank like", are you referring to "B"? That is the diff lock pedal. On My 2000D, the dipstick is located on top of the trans case. In the OP's pic, it is the filler located between "C" and "D"....
  65. Replies
    7
    Views
    2,781

    Re: Shiraura D23F lost 4wd

    Well, I hate to make suggestions that have you chasing ghosts. I have to think it is unlikely that your ring gear was only used in one model when they have produced so many similar sized machines....
  66. Replies
    7
    Views
    2,781

    Re: Shiraura D23F lost 4wd

    I have read that the NH 1720 is a pretty good crossover to your machine. New Holland Parts - Best diagrams, pricing and service! The 1720 and 1920 use the same gears and under the 1920 the pinion is...
  67. Re: Tractor no. 15 !! It will be Cat yellow and have TRACKS !

    Hey, Just got my new issue of Farm Show Magazine. Saw you in it with your 1/2 scale JD. Sweet!!!!
  68. Thread: Mowercycle

    by Kernopelli
    Replies
    20
    Views
    2,892

    Re: Mowercycle

    I love old bikes but I REALLY love seeing supermoto's on the street! I want to see your Husqvarna!!! I would like to have a KTM 500 EXC with an extra set of street tires/rims to swap back and forth...
  69. Replies
    1
    Views
    1,770

    Re: Shibaura SB1500B Problem

    Sounds like low compression, I would do a compression test and go from there.
  70. Replies
    4
    Views
    1,017

    Re: International 244

    I have never owned an IH244 but it is a Mitsubishi made tractor and is basically the same machine as a Mitsubishi MT180/ MTE1800....those models I'm familiar with. I have only seen a strainer on the...
  71. Replies
    2
    Views
    412

    Re: AC 615 ind tractor

    A quick search of AgcoParts didn't show a pump and neither did a pump search for a 615. I would pursue finding a pump by Googling what other A.C. models used a D2200 ( looks like some HD4's and 175...
  72. Replies
    5
    Views
    1,606

    Re: Ford 1910 Clutch Alignment Tool

    I have never owned an alignment tool. I either turn a wood dowel down to the correct steps in diameter or use a dowel that is already the diameter of the small end and wrap tape around the dowel to...
  73. Replies
    7
    Views
    1,000

    Re: Ford 2120 shift fork worn

    I just looked on New Holland Parts - Best diagrams, pricing and service! and it appears all the shift forks are available and range from $60-$100 depending on which fork you need. As far as type of...
  74. Replies
    4
    Views
    2,284

    Re: k3d mitsubishi diesel engine

    Any small pump should be sufficient. Volume is the main thing but I will say even the low pressure (3-5 psi) inline fuel pumps will be all you need. Available from any auto parts store or you can...
  75. Replies
    46
    Views
    6,750

    Re: A favor to your angle grinder

    Before buying a plasma cutter I used my grinders for almost all cutting I had to do. I realized the gear grease issue on my last two Dewalt grinders. Despite keeping grease on the bevel gears I...
  76. Replies
    1
    Views
    493

    Re: satoh s650g bison

    I would contact the guys at Valley Power . They are probably the top Satoh experts in the country. Very nice people and will be willing to discuss your issues. Also, Japanese Tractor Repair Dixon, IL...
  77. Replies
    9
    Views
    1,287

    Re: Mitsubishi KE75 engine

    I cant help with pics or a manual but I suggest you post this in the Iseki forum below. I know there are several people with Bolens G174 or TX1500 model Isekis that hang out there, I'm sure someone...
  78. Replies
    5
    Views
    1,011

    Re: YM240 double tires

    I'd like to come see them sometime. I usually have Monday, Wed, Thurs. days or Fri, Sat, Sun. evenings available. What are we talking as "trade material"? I don't normally trade away guns, tools or...
  79. Replies
    5
    Views
    1,011

    Re: YM240 double tires

    What size tires? I'm in the neighborhood and might be interested. Are you by chance "Dave's Custom Gunsmithing" ?
  80. Replies
    1
    Views
    1,342

    Re: Help with L3E engine

    I usually use NCW Tractor Parts & Tractor Supply Store - Compact Tractor Parts for parts. They don't list the parts on their site but I'm sure they can quote you a price. $200 for a piston and rings...
  81. Re: Kubota HST Solenoid Connector Broken Wire - $2300 skinning

    Ditto on checking the agreement. The place I usually rent from includes insurance on their equipment rental agreement. I did some serious damage to a large tiller years ago and they didn't act upset...
  82. Re: cub cadet 7274 turned over, but now will not move?!?!??

    Try Dennis at 931 863 4229 ( TBN member dogpatch06 recently purchased a K3G from him and is very pleased) or Bruce Laten at 931-492-0316. They may have /or can get a K3M
  83. Replies
    2
    Views
    1,106

    Re: Power steering leak Mitsubishi MT 250 D

    Your 250 power steering relief pressure should be 1490PSI and the valve should be factory set at that pressure. The relief valve is located directly above the steering box housing and sandwiched...
  84. Replies
    6,175
    Views
    1,210,295

    Re: Harbor Freight Tools that don't suck

    Yeah....a free $5 is nice but not worth the hassle at this point. I just looked and they are showing a 25% off coupon on their homepage right now. Funny thing is, yesterday they showed a 20% coupon...
  85. Replies
    6,175
    Views
    1,210,295

    Re: Harbor Freight Tools that don't suck

    CRUD! A day late and a dollar short......story of my life! Yesterday, I ordered their 115 psc set of carbide drill bits. Reg. $130 but I got 20% off the $99 sale price...not bad but I'll take 25% off...
  86. Thread: D2650fd

    by Kernopelli
    Replies
    1
    Views
    935

    Re: D2650fd

    The only Mitsubishi engine I've personally known of that was designed that way was a Mitsubishi S4S-D in a Montana 5740. I have never had the pan off a K4E but maybe it is of that design too....
  87. Replies
    1
    Views
    474

    Re: mitsubishi 2650d 4x4

    I assume it was running fine and then sat for 7 months...... can't be much wrong with it. I would make sure you have a strong battery....cranking speed is important. Make sure you are getting fuel at...
  88. Replies
    10
    Views
    2,331

    Re: 4 Cylinder Mitsubishi diesel won't start.

    Excellent....glad you got her going and able to do so with little expense!!
  89. Replies
    10
    Views
    2,331

    Re: 4 Cylinder Mitsubishi diesel won't start.

    This is a good point...he said he checked the glow plugs but didn't go into detail. My current Mitsubishi is also very sensitive to temp. Warm/hot temps outside and she fires right up. 40 degrees and...
  90. Replies
    10
    Views
    2,331

    Re: 4 Cylinder Mitsubishi diesel won't start.

    You are getting fuel to the injectors and the engine is turning over at the key, this rules out any safety switches, fuel shut off, need to bleed fuel system, etc. You already have checked much of...
  91. Replies
    3
    Views
    1,103

    Re: Cofle Joystick Control Cable

    Check out this thread here on TBN. http://www.tractorbynet.com/forums/parts-repairs/179597-fel-joystick-control-cable-repair.html Rob Liefveld ( 3RRL) is a great guy and very talented.... retired...
  92. Replies
    3
    Views
    1,103

    Re: Cofle Joystick Control Cable

    Can't find the part online but there are a fair number of forum posts concerning Cofle cables breaking and some home made repairs for them. Did yours break at the white plastic cable end? Google...
  93. Replies
    13
    Views
    4,790

    Re: Mitsubishi K3G engine

    I'd give Bruce Laten a call again. That's going to be a hard engine to find. He may not have one in stock but he helped me with a K3F ( probably rarer than the G model) engine a while back, it took...
  94. Thread: MT-250D

    by Kernopelli
    Replies
    1
    Views
    903

    Re: MT-250D

    I don't know of an online diagram. I suggest that every tractor owner have a service manual for his machine. The I&T shop manual for Mitsubishi MT160-MT300 models covers most all repairs and has...
  95. Replies
    6
    Views
    590

    Oil & Fuel Re: iseki no start

    Since you've checked the valves, you would have noticed if it had a decompression system....they usually just hold an exhaust valve open. Most safety switches are either going to cut power to the...
  96. Replies
    1
    Views
    902

    Re: Ford 1920 power steering cylinder

    New Holland Parts - Best diagrams, pricing and service! has one
  97. Replies
    9
    Views
    2,076

    Re: 4 wheel drive will not engage

    I am a little confused by what you are referring to as rear drive shaft. The rear tires are driven from the rear of the transmission. Your rear differential is located in the transmission case and...
  98. Thread: cutting oil

    by Kernopelli
    Replies
    26
    Views
    2,559

    Re: cutting oil

    I used to use any oil I had on hand. I figured something was better than nothing. I recently started using Tap Magic and I am sold on it. Liberal amounts of spray lubes or oil helped, especially to...
  99. Replies
    48
    Views
    8,799

    Re: 24hp tractor at northern tools

    I assume the NT's are still Jinma made. I had a Jinma 284 and it was a surprisingly good tractor in many ways.... lots of power, heavy for a 28hp compact,etc. However, it just wasn't the quality of...
  100. Replies
    2
    Views
    408

    Re: 245 steering issue

    Go to AGCO Parts Books ( enter as "Guest User"), you can see a parts diagram of the steering valve etc. It will give you an idea of what you will need to do.
Results 1 to 100 of 1828
Page 1 of 19 1 2 3 4
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.