Search:

Type: Posts; User: kubotacres; Keyword(s):

Results 1 to 100 of 323
Page 1 of 4 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    16
    Views
    599

    Re: Built Canopy for the L3560

    I haven't noticed any increase in noise. I was on it 2 hrs this morning and it was the same noise level as usual.
  2. Replies
    16
    Views
    599

    Re: Built Canopy for the L3560

    good idea. I have a roll from when I did my shop. I may try it out.
  3. Replies
    16
    Views
    599

    Re: Built Canopy for the L3560

    I agree . Plus it'll give my ole strawhat a break every now and then.[emoji106]
  4. Replies
    16
    Views
    599

    Re: Built Canopy for the L3560

    In regards to the braces....It's hard to see in the picture but there are two braces 3" wide running along both side of the rops horizontal. The u bolts are bolted over the rops , into both braces...
  5. Replies
    16
    Views
    599

    Built Canopy for the L3560

    I've never owned a tractor with a canopy but now I see what I've been missing. About 4 years ago I acquired a piece of shiny Kubota Orange aluminum that I "planned" to install on the L3200. I tucked...
  6. Replies
    24
    Views
    985

    Re: L3560 loaders?

    alrighty. Was just going to add if it wasn't you could get a non-cab l3560 for well under the prices you mentioned.
  7. Replies
    24
    Views
    985

    Re: L3560 loaders?

    Just curious if having the cab is a must?
  8. Replies
    24
    Views
    985

    Re: L3560 loaders?

    If you have an option, I'd buy the la805 loader no questions asked.Kubota does offer the QA loader standard on the LA555 which is nice. Going from the LA524 on my last tractor to the LA805 is a very...
  9. Replies
    15
    Views
    1,380

    Re: Order new air ride seat from Kubota today.

    The grammer seat I'm referring too is off a Zero Turn mower. I'm assuming that it should be a difference on the tractor seats.... Or I'd atleast hope it would be for the $$$.
  10. Replies
    24
    Views
    985

    Re: L3560 loaders?

    Those must be some huge square bales. I was able to lift some nice sized round bales to the maximum lift with my l3200. Of course our bales maybe paperweights compared to other places....[emoji4]
  11. Replies
    12
    Views
    958

    Re: L2501 opinons and feedback

    I agree. Buy what you really want now. I bought a l3200 which was a excellent tractor, but I really wanted a Grand L. Luckily 5 years later I sold at a very good price and bought what I initially...
  12. Replies
    15
    Views
    1,380

    Re: Order new air ride seat from Kubota today.

    I have a grammer seat on my ZT and it's pretty smooth.I set the height 2 1/2 years ago and it's never changed. It was added as an option over the factory seat which didn't have arm rests. However the...
  13. Re: Grand L series suspension seat any upgrades

    I'm just messing with yah.[emoji2]
  14. Re: Grand L series suspension seat any upgrades

    I love mine. I came from the STD L seat and it's no comparison. I haven't bottomed mine since purchasing and I don't think it's on the firmest setting. Of course you a have a few extra lbs on...
  15. Replies
    19
    Views
    2,511

    Re: First Oil Change at 32 hrs?

    For whatever reason Kubota doesn't send enough bolts for all the holes located in the loader support bracket. I had to get the dealer to supply 4 extra bolts. Kubota says only 2 bolts on each side is...
  16. Replies
    22
    Views
    11,442

    Re: Kubota Quick Attach Loader Problems

    holy old thread batman.:laughing:
  17. Re: Got my new L3560 today from the dealer after waiting a month!

    Looks good. I had the dealer install the extra bolts for the mid mount loader brace. Not sure why Kubota doesn't include them with the loader, but It bothered me everyone I saw those empty bolt holes.
  18. Replies
    12
    Views
    1,876

    Re: Cannot Load Tires without Unseating Bead

    I had to do some quick "engineering" at the last moment. But it worked.472563
  19. Replies
    12
    Views
    1,876

    Re: Cannot Load Tires without Unseating Bead

    alright got it done today. used a two way valve,the Milton air/water valve and a quick connect for the water hose. went well and even added the antifreeze... glad it's over without any problems.
  20. Loader Re: What are the removable plates for on the LA805

    may have something to do with the optional no-spill bucket attachment. not really sure either. could also be for the hydraulic coupler as well.
  21. Loader Re: What are the removable plates for on the LA805

    You talking about this one?471816
  22. Loader Re: What are the removable plates for on the LA805

    I don't guess I've noticed them. Is it part of the bucket level indicator rod?
  23. Replies
    12
    Views
    1,876

    Re: Cannot Load Tires without Unseating Bead

    I have both these valves. The only issue I see will be pumping the antifreeze into the tire.I normally pump with a small hand pump and the end of the hose stuck over the valve stem. In this case I...
  24. Replies
    12
    Views
    1,876

    Re: Cannot Load Tires without Unseating Bead

    Tried that initially and It unseated. Tire/Wheel was still mounted but ended up taking it off to get bead seated.



    I think that the first thing I did wrong was having the entire tire/wheel...
  25. Replies
    12
    Views
    1,876

    Cannot Load Tires without Unseating Bead

    So a very long story shortened. Several weeks ago when I bought my l3560 the first thing I decided to do was load the rear tires. I have done this several times on my previous tractors and it's...
  26. Replies
    41
    Views
    6,892

    Re: How much off MSRP is a good deal

    looks good. I waited a lil over three weeks from the factory so know what your going through.. Be sure they install the extra bolts for the loader mid brace. Kubota doesn't send the required amount ...
  27. Replies
    41
    Views
    6,892

    Re: How much off MSRP is a good deal

    Ready for some pictures!.. I just had my hooks welded on my bucket.My tractor was naked without them.lol
  28. Replies
    468
    Views
    82,185

    Re: Damaged block installing block heater L5240

    I've been following along even though I haven't posted. Hope all works well.:thumbsup:
  29. Re: Kubota doesn't offer top and tilt on L3560?? And I already bought the tractor!!

    I hear yah. I drove a couple hrs to save $$ myself. You won't be disappointed with this tractor. On top of the many upgrades from the STD L, it's also several upgrades from the last Grand L. I love...
  30. Re: Kubota doesn't offer top and tilt on L3560?? And I already bought the tractor!!

    just curious what kind of deal you got? I got everything but the extra remotes and it was right around 24K.
  31. Replies
    41
    Views
    6,892

    Re: How much off MSRP is a good deal

    I think you will be quite impressed especially with the LA805 loader. Myself coming from a L3200, it's "night and day" difference. I have no regrets and got everything I wanted. It took a lil over a ...
  32. Replies
    41
    Views
    6,892

    Re: How much off MSRP is a good deal

    the standard bucket is plenty. I had this same decision to make about a month ago when I bought my l3560. I'm well pleased.
  33. Replies
    39
    Views
    3,710

    Re: Math Problem - How many Cans ??

    30240
  34. Buying Advice Re: Replacing golf cart with bed - RTV 400 or rtv 500 ?

    If your choice is between the RTV 400 and RTV 500 go with the 500. It's well worth the extra $1k for a "Kubota" twin water cooled engine, fuel injection and the completely sealed Hydro transmission....
  35. Replies
    1
    Views
    478

    Re: L3560 12volt Power Supply

    update.

    It's connected to Wiring Harness B50703.
  36. Replies
    1
    Views
    478

    L3560 12volt Power Supply

    From what I've read, the L60 series comes with a 12 volt harness behind the seat. I'm assuming that this is the cab only tractor since mine didn't come with one. I'm wanting to add a few small...
  37. Thread: new kubotas

    by kubotacres
    Replies
    25
    Views
    4,832

    Re: new kubotas

    I agree. The ole Jubilee we owned loved gasoline.
  38. Replies
    22
    Views
    2,932

    Re: Your thoughts

    Actually the newer 3301/3901 are synchro so it is a upgrade from the 3200/3800. However the 3130 has the shuttle on the column. I'd personally go with the 3130. The Grand features are worth every...
  39. Thread: new kubotas

    by kubotacres
    Replies
    25
    Views
    4,832

    Re: new kubotas

    Currently on Kubota it's 75 HP and above. Not sure about other manufacturers
  40. Thread: new kubotas

    by kubotacres
    Replies
    25
    Views
    4,832

    Re: new kubotas

    I talked to another dealer just for giggles, and was told yet again that the DEF is being added to the 25 horse above Kubotas. Either way it doesn't concern me unless I plan on buying another......
  41. Replies
    25
    Views
    9,392

    Re: Intellipanel Display Setting

    Old thread I know.......but for anyone's benefit, the number for the l3560 (smaller) R4 tires is 2404. This is located under the B Selection.
  42. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    Tried out the Bale spear yesterday. Well worth the money.
  43. Thread: new kubotas

    by kubotacres
    Replies
    25
    Views
    4,832

    Re: new kubotas

    Can you explain? I've had two dealerships tell the exact same story.
  44. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    What little time I was on it, I found myself using the dual speed pretty regular. It sure keeps me flowing with the work rather than stopping to find a lower/higher speed.
  45. Thread: new kubotas

    by kubotacres
    Replies
    25
    Views
    4,832

    Re: new kubotas

    Currently yes but it will change according to my dealer. By this time next year all the Kubota's 25 hp and greater will have DEF additive for the Tier 4 engines.
  46. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    Well here it is. What little time I had to use today in the garden, I was very impressed. The HST will take some time to get used to but i like it already. The air ride seat and lever layout is...
  47. Thread: new kubotas

    by kubotacres
    Replies
    25
    Views
    4,832

    Re: new kubotas

    When I heard of the DEF being added, I was quick to make my mind up on ordering a new tractor now.
  48. Thread: new kubotas

    by kubotacres
    Replies
    25
    Views
    4,832

    Re: new kubotas

    I was told by a dealer they will start requiring DEF on next year's models... Not sure if that's true or not.
  49. Thread: L3901 ?

    by kubotacres
    Replies
    37
    Views
    3,809

    Re: L3901 ?

    My l3200 (just sold) was capable of pulling a 5' Disk with no hesitation in 4wd. You have several more horses, so I don't think you will have any issues. I was also running loaded rear R4's which I...
  50. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    Update.. The tractor arrived at the dealership today. I'm looking at next Tuesday-Wednesday to pick it up due to assembly and whatnot. I'm ready.
  51. Replies
    22
    Views
    3,160

    Re: Tiller Tines Replacement

    Just for reference, attached is before/after photos of the tiller
  52. Replies
    22
    Views
    3,160

    Re: Tiller Tines Replacement

    Really good info. I have all the nuts/ bolts needed but will need to order Tines. Cheapest place I could find was a little under $200. In my opinion I think it's time to replace but I personally tend...
  53. Replies
    22
    Views
    3,160

    Re: Tiller Tines Replacement

    That's what i was wondering before I sink $200 into new Tines.
  54. Replies
    22
    Views
    3,160

    Tiller Tines Replacement

    I just completed a overhaul on a recently bought tiller.Installed a new slip clutch pto shaft,fresh oil change,adjusted chain tension and completely sanded,primed,and painted.Overall the tiller is in...
  55. Replies
    21
    Views
    2,739

    Re: After the fact loader purchase

    2nd that. I bought my first tractor without a loader. 1 year later I came to my senses and bought the loader. After getting opinions, I opted for the OEM Kubota loader and I'm so happy I did. Not...
  56. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    Been a lil over a week.... I'm as antsy as ever. I picked the worst time to sell my tractor considering how much I need it right now for gardening, however I know I made a good decision. :confused2:
  57. Replies
    45
    Views
    5,787

    Re: Plow first or go right to tiller?

    I had initially thought of buying a single bottom plow when I first started gardening. However I found running my disk first would break it up enough for a fine soil tilling. Of course I already had...
  58. Replies
    17
    Views
    3,107

    Buying Advice Re: 2010 Kubota L3540 HST used

    A nice tractor indeed. I was in your same shoes but decided to give a few thousand more for a new tractor since there is a nice incentive for cash right now. I looked several months and couldn't find...
  59. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    I wouldn't mind a hydraulic top link. May look at installing later on.
  60. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    Pictures will be posted as soon as I pick up.:D
  61. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    I will definitely do the cup holder mod since I need a cold refreshment during the warm months. I added a horn on my l3200 and bought an extra for a spare. I will be adding the spare on the l3560. I...
  62. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    Drove one with the HST plus and loved it. I was worried about the power rob from the HST but I think it will be fine.
  63. Replies
    29
    Views
    5,151

    Re: The Time has Come. New L3560 Ordered

    I always over research things, especially when it involves large $$. But in the end, it insures I get what I wanted and very few surprises.

    I didn't add any remotes. None of my implements have use...
  64. Replies
    35
    Views
    5,650

    Re: Sold L3200, Time to Upgrade. GST Opinions?

    Your answer awaits here

    http://www.tractorbynet.com/forums/kubota-buying-pricing/354388-time-has-come-new-l3560.html#post4402646[
  65. Replies
    29
    Views
    5,151

    The Time has Come. New L3560 Ordered

    After much "in depth" research, test driving, used tractor searching and lots of question asking I pulled the trigger today. I think I will be well pleased and hopefully it will surpass my needs. I...
  66. Re: Rain finally stopped here - - more later today.

    This is the worst it's ever been here in Central Louisiana. There is over 7' of water running from the nearby river in the front yard of my parents. Luckily I built in a high spot but I still can't...
  67. Replies
    20
    Views
    3,739

    Re: Which Bucket to buy for LA805 loader

    Had the quote change today to reflect the la2235 bucket. $50 more.
  68. Replies
    20
    Views
    3,739

    Re: Which Bucket to buy for LA805 loader

    The 4-in-1 would be an overkill for my applications. I believe I'm going with the standard bucket which has always met my needs.
  69. Replies
    20
    Views
    3,739

    Re: Which Bucket to buy for LA805 loader

    Thank you for this.. Just the info I needed. I'm going with the square which seems to be the standard. Looks the same that was on my 524 loader.
  70. Replies
    20
    Views
    3,739

    Re: Which Bucket to buy for LA805 loader

    I was under the impression that the " light material" was considered the standard bucket.... What is the difference between the light and the square? Which one is superior?
  71. Replies
    20
    Views
    3,739

    Which Bucket to buy for LA805 loader

    So I've researched and still haven't found the answer I'm looking for. I was quoted a LA805 loader with a L2236 bucket (72" QA). The bucket is considered "light material". The other bucket I'm...
  72. Replies
    35
    Views
    5,650

    Re: Sold L3200, Time to Upgrade. GST Opinions?

    I will be testing out the GST and HST next week on a l3560. I will make my decision then which one I prefer. Either is a huge upgrade from my non- synchro DT I had on the l3200. Heck even a FST would...
  73. Replies
    35
    Views
    5,650

    Re: Sold L3200, Time to Upgrade. GST Opinions?

    Unfortunately I went to the dealer to test drive and the only tractor there with GST wouldn't start due to a run down battery. I didn't have time to wait so ill have to run by another day.However is...
  74. Replies
    35
    Views
    5,650

    Re: Sold L3200, Time to Upgrade. GST Opinions?

    That is a clean tractor. Too bad the 3540 is a rarity around my parts especially with the open station.... I'm going to stop by after work and test out the GST and see how well I like it. That should...
  75. Replies
    35
    Views
    5,650

    Re: Sold L3200, Time to Upgrade. GST Opinions?

    Yeah it will definitely be a open station.ID like to go with the 3940 for the extra horses, however the size may be to much for my implements. I have never seen a 3540 anywhere local, the majority of...
  76. Replies
    35
    Views
    5,650

    Re: Sold L3200, Time to Upgrade. GST Opinions?

    I believe my mind is made up. I'm going with a gst.

    Still gotta decide on size since I believe a 3940 is more than I need. I would like to keep all my 5' implements and the 3940 is wider than...
  77. Replies
    35
    Views
    5,650

    Re: Sold L3200, Time to Upgrade. GST Opinions?

    Good info. How often do you actually use the clutch? Any while forward/reverse?
  78. Replies
    35
    Views
    5,650

    Re: Sold L3200, Time to Upgrade. GST Opinions?

    Personally I WANT the shuttle on the steering column. I just need to know the pros of the gst compared to the FST.
  79. Replies
    35
    Views
    5,650

    Sold L3200, Time to Upgrade. GST Opinions?

    Well after much thought and lots of looking, I decided to put the L3200 up for sale. Within a day I got my asking price and the tractor will be picked up tomorrow....The l3200 is a very good tractor...
  80. Replies
    22
    Views
    5,298

    Re: Kubota RTV Recall Notice

    Had the shaft replaced last week. All looks good.
  81. Replies
    12
    Views
    2,376

    Re: Kubota RTV500 Noise while in 4wd

    Just an update... Had the dealer check out the noise. They said they could hear and feel the vibration, however everything was in good shape. They checked the front diff,drive shaft,ect and nothing...
  82. Replies
    29
    Views
    2,982

    Re: Adding Telescopic Stabilizer Kit-Worth It?

    This was the best mod I performed. After driving a Grand L for awhile I got used to them, and knew I would upgrade once I bought the l3200. Well worth the $175 for the Kubota stabilizers....
  83. Replies
    71
    Views
    8,612

    Re: How did you first discover Kubota?

    Lol, it happens.
  84. Replies
    71
    Views
    8,612

    Re: How did you first discover Kubota?

    Holy old thread batman.....

    Anyways, mine was from everybody in my family owning them and having no issues.
  85. Replies
    22
    Views
    5,298

    Re: Kubota RTV Recall Notice

    lol, my dealer said that Kubota isn't sending out the parts until the 1st of Feb nationwide and to wait on a call back when they start to arrive.... I guess that's not the case.
  86. Replies
    22
    Views
    5,298

    Re: Kubota RTV Recall Notice

    This Recall in particular has nothing to do with the hood but actually the steering shaft shearing or breaking.
  87. Replies
    22
    Views
    5,298

    Re: Kubota RTV Recall Notice

    Although that is a Recall, it isn't the one I received.Mine is for 400-500 models and involves replacement of the steering shaft.
  88. Replies
    22
    Views
    5,298

    Re: Kubota RTV Recall Notice

    Didn't specify, it only stated my particular model. I should know more about it tomorrow.
  89. Replies
    22
    Views
    5,298

    Kubota RTV Recall Notice

    Has anybody else received a Recall notice for the steering shaft?I'm going to call the dealer shortly to schedule a date to bring in. I haven't had any issues with mine but it must be a problem....
  90. Replies
    14
    Views
    2,671

    Buying Advice Re: Looking at RTV 500

    I agree. I went to the dealer to buy a 900 having never looked at the 500. After walking past the 500 I liked the overall size. When I dug into the specs on the engine/transmission, ect I knew then I...
  91. Replies
    14
    Views
    2,671

    Buying Advice Re: Looking at RTV 500

    I'm well pleased with mine. I bought it this year and I've put a little over 80 hours on it so far. I wanted a work horse and not a race horse, so the 500 fit the bill.A hydro lift was available...
  92. Replies
    27
    Views
    2,460

    Re: Anyone move round bales with a L3800?

    Your fine. I would load the rear tires though.
  93. Replies
    27
    Views
    2,460

    Re: Anyone move round bales with a L3800?

    That was to show lifting ability. Anybody with common sense should know not haul them that way.
  94. Replies
    27
    Views
    2,460

    Re: Anyone move round bales with a L3800?

    Lol, I went to correct it, and it deleted somehow. Oh well.
  95. Re: Kubota Shoots Themselves In The Foot With Survey On My Experience

    I received my survey about a month or two after purchasing my L3200. I performed it online and also received a paper survey via snail mail as well. My only negatives were it not being syncro-shuttle...
  96. Replies
    17
    Views
    2,034

    Buying Advice Re: Loader for L3200 a LA525?

    I was in your same situation except I bought my Tractor new without a loader. My thread is listed below. Long story short I bought Kubota brand and glad I did. BTW I'm a couple hr's north and i can...
  97. Replies
    22
    Views
    2,462

    Re: L3200 replacement tool box

    https://www.amazon.com/dp/B00BW67A5E/ref=cm_sw_r_awd_Q4z3vbP3SPFT2

    The photos on my end look good. The above link has three different photos of it.
  98. Replies
    22
    Views
    2,462

    Re: L3200 replacement tool box

    This is what I'm going with when my OEM plastic box breaks. Looks sturdy.

    https://www.amazon.com/dp/B00V3EUMZK/ref=cm_sw_r_awd_F-s3vbFXTQ79H
  99. Re: 2004 Polaris Ranger 6x6: Will Not Go Into Hi

    I agree. It could be as simple as adjusting the linkage.
  100. Replies
    44
    Views
    5,050

    Re: Rural Living

    In LA (or atleast my power company) will supply needed poles regardless of length from nearest service pole. You are responsible for power from the transformer to your house. From the transformer to...
Results 1 to 100 of 323
Page 1 of 4 1 2 3 4
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.