Search:

Type: Posts; User: Brad_Blazer; Keyword(s):

Results 1 to 100 of 1911
Page 1 of 20 1 2 3 4

Search: Search took 0.17 seconds.

  1. Replies
    736
    Views
    211,667

    Sticky: Re: EverythingAttachments.com

    Pioneer o-rings: If it's the mating o-ring I like the "X-profile" o-rings at McMaster. I think the size is -211 for a 1/2" coupler and it can be replaced in the field. I've also replaced poppet...
  2. Re: replace a 5 inch cylinder with a 4 inch on log loader

    Going from 5" to 4" will reduce force / increase speed by 36%.
    An impact wrench works wonders for a nut removal situation like muddstopper describes.
  3. Replies
    736
    Views
    211,667

    Sticky: Re: EverythingAttachments.com

    So you're moving to Iredell County...
  4. Replies
    14
    Views
    1,932

    Re: Used medium car or suv

    Check Carvana out of Atlanta. They probably deliver free to FL. Plug in your price range and see what pops up.
    www.carvana.com
  5. Re: Can/Should/How Would I Weld Grader Blade Arm? (Pics)

    The ARCs are giving you plenty of good welding advice. The position of the outer tube will not have much effect on the angle of the blade vs. hole selection. Short of separating the angle plate from...
  6. Re: Australian logging and milling-as it was

    Starting around 3:40 in the video. Yeah, it looks like a block and tackle was attached to a brake lever on each set of trucks. They had to work them going downhill.
  7. Rake Re: Who makes the best heavy duty landscape rake

    I wish the York website had better pictures. One of the best features of the EA rakes is the tine bar which is stiff, rugged, and significantly protects the tines from damage. I haven't seen any...
  8. Thread: AR15 lower

    by Brad_Blazer
    Replies
    16
    Views
    1,801

    Re: AR15 lower

    I ordered a complete kit with 80% lower from Daytona Tactical. They had some negative reviews for not responding to emails and people who didn't seem to understand their stated lead time. I took a...
  9. Box Scraper Re: Brought a cheap *** used box blade - what scarifer?

    This thread has some descriptive pictures:
    http://www.tractorbynet.com/forums/yanmar/336881-how-do-i-secure-these.html

    Agri Supply has the square pins....
  10. Replies
    18
    Views
    3,054

    Re: Price for BCS 605 with Tiller

    70% of MSRP.
    Grounds Maintenance(R) Equipment Blue Book(R) - Rotary Tillers - Bcs America - 65 Configurations
  11. Replies
    43
    Views
    8,312

    Re: Got hit by electric fence.

    I was foolish enough to run a Tough Mudder a year and a half ago. The last obstacle is a muddy spot with some rows of bales to step over and a bunch of hanging strands of the plastic fence wire...
  12. Replies
    33
    Views
    2,968

    Re: Carpenter bees!!!!!

    It's pretty incredible how difficult it is to enforce a patent on something like this when there are literally hundreds of infringers. My brother is actively trying to enforce with Ebay, Amazon, and...
  13. Replies
    53
    Views
    8,902

    Re: County Line(TSC) Landscape rake

    I was looking at the same thing last year. I went with the Everything Attachments unit. Its pushing $700 but the tine support is Much better and the offset feature adds significant utility.
  14. Replies
    11
    Views
    2,304

    Buying Advice Re: Towable Backhoe? From China?

    Scroll down to Patrick G's review of the Harbor Freight towable in this thread.

    http://www.tractorbynet.com/forums/attachments/113502-harbor-freight-back-hoe-trencher-2.html

    Here's a link to...
  15. Replies
    29
    Views
    3,248

    3-Point Hitch Re: 3 pt. log splitter

    I have a plain 3-point splitter from Northern - they don't sell that model any more - that does the job running off tractor hydraulics. I upgraded to a regen valve which helps, especially running off...
  16. Replies
    56
    Views
    10,401

    Re: Shooting Bench

    A flap disk on an angle grinder also works pretty good to quickly ease the edges on outdoor furniture.
  17. Replies
    9
    Views
    2,340

    Re: Twin-engined 2-wheel tractor

    I would argue that the larger tractor and mower shown has many more moving parts than the dual walking tractor setup and of course half of the walking tractor parts are repeated in the second unit so...
  18. Replies
    3
    Views
    648

    Re: old backhoe in tallahassee, fl.

    Congrats and welcome. Feel free to post pictures. Be careful.
  19. Replies
    56
    Views
    10,401

    Re: Shooting Bench

    I went a little more minimalist with my Jawhorse bench. It does make a handy, sturdy base....
  20. Re: MSRP schock on Ford F150 prices model year 2015 and newer

    I see decent deals on used trucks coming from the rental fleets. My 2012 Ram 1500 listed a rental co. as the previous owner. Carvana seems to specialize in such vehicles. It may be a challenge to...
  21. Replies
    2
    Views
    1,411

    Re: Looking for large 48" 3 ph scoop pan

    This search turns one up on ebay in Ohio, 2-wheel pull type.
    https://for-sale.yakaz.com/dirt-scoop
  22. Replies
    36
    Views
    4,059

    Re: Oh I want this drill press

    I've seen the friction drill demoed at a trade show. The guy was drilling by hand with a larger Craftsman drill press.
    There's an antique drill press on the Charlotte Craigslist right now for $450....
  23. Replies
    88
    Views
    10,881

    Re: Anyone Roll Coal with a Tractor?

    From Page 7 #65:

    Yes, in some classes they had a max speed rule.
  24. Replies
    88
    Views
    10,881

    Re: Anyone Roll Coal with a Tractor?

    Here's the video I just saw that brought me back to this thread. Pretty impressive although he's probably running unloaded.
    https://www.youtube.com/watch?v=gbOABnnODyo
  25. Replies
    6
    Views
    927

    Backhoe Re: I broke my backhoe

    Looks to me like the bead was too small, not enough cross-section to keep the loading below the yield stress. Maybe a little cold because it didn't wet out to the inside but formed a notch that can...
  26. Replies
    9
    Views
    2,587

    DEADLIEST WORKPLACE: THE FARM

    This is a 4-part series on farm safety.

    Part 1: Deaths on the rise on Minnesota family farms - StarTribune.com
  27. Replies
    1
    Views
    873

    2-Wheel Racing

    Saw this video on Facebook - pretty @#$% fast!
    https://www.facebook.com/SpeedSociety/videos/1246082365409063/

    I looked on youtube - not a whole lot out there, but this one's pretty cool....
  28. Replies
    6,172
    Views
    1,210,072

    Re: Harbor Freight Tools that don't suck

    The Brush Mower listing is now on-line:
    6.5 HP (212cc) 21 in. Brush Mower

    Edit 1: And here's the link to the manual again.
    http://manuals.harborfreight.com/manuals/61000-61999/61623.pdf

    Edit...
  29. Replies
    6,172
    Views
    1,210,072

    Re: Harbor Freight Tools that don't suck

    Got a new catalog yesterday to peruse while on the pot. Wait a minute - Brush Mower??

    It's not on the web site yet but the manual is online for item 61623. Self propelled, appears to be set up...
  30. Replies
    88
    Views
    10,881

    Re: Anyone Roll Coal with a Tractor?

    I agree "rolling coal" in the face of other drivers is criminally obnoxious. It is cool to see at pulls though and there may be one benefit.
    https://www.youtube.com/watch?v=w5jiSv31Faw
  31. Replies
    1
    Views
    775

    VW Cheats on Diesel Emissions

    The emissions controls only kick on for the tests.
    VW ?Clean Diesel? Scheme Exposed as Criminal Charges Weighed - Bloomberg Business
  32. Re: Who makes the highest quality PTO generator?

    If you like the idea of an 1800rpm generator head this place sells the parts you would need to put one together. I don't have any personal experience with them.
    Central Georgia Generator, LLC (CGG)
  33. Re: Big explosions in China affect Deere operations and injured some workers.

    Wow. It looks like a war zone.
    China explosions: Fires still burning after Tianjin blasts - BBC News
    https://twitter.com/XHNews
  34. Replies
    42
    Views
    4,242

    Buying Advice Re: New TMT (Chinese ) 40hp ?

    TMT 40 HP 4x4 4in1 SELF LEVELING FRONT END LOADER | Heavy, Farming & Agriculture Equipment | Gumtree Australia Leeton Area - Leeton | 1085872717

    The dealer should be able to tell you who the...
  35. Re: Your opinion on which is the right tool for the job

    It looks like the center of the bolt is not very far above the bottom edge of the bar that forms the back of the pocket for the ripper. That will give the ripper too much leverage on the bolt. You...
  36. Replies
    57
    Views
    5,671

    Re: Best wood splitter for the money

    If you can justify $8000 or more for the incremental gain of a monster splitter vs. a basic model it seems like $20,000 for a firewood processor is a no-brainer. As soon as you start paying wages and...
  37. Replies
    11
    Views
    988

    Re: What's chipping up this tree?

    First come the bugs, then the woodpeckers start digging for them.
  38. Replies
    158
    Views
    16,709

    Re: Wheel spacers or weights for slopes?

    Even an experienced operator on a wide tractor can get in trouble on slopes. http://www.greenbaypressgazette.com/story/news/local/2015/07/09/man-rescued-farm-accident-critical-condition/29945605/
  39. Replies
    165
    Views
    11,442

    Re: Chevy Pokes Fun at Ford Aluminum Truck

    I guess you are trying to say that steel has a higher modulus of elasticity (E) than aluminum. True but I'm pretty sure they increase the thickness of the aluminum to match the tensile stiffness (EA)...
  40. Thread: Fireworks?

    by Brad_Blazer
    Replies
    39
    Views
    3,472

    Re: Fireworks?

    I had never heard the Benton story. I remember back around 1982 I was leaving the county fair and I saw a guy selling M-80's out of the trunk of his car where he had a big box of them, probably about...
  41. Re: Just joined guys, so I'm not sure what I've bitten into.

    Congrats on the tractor purchase!

    Found this. Untitled Document

    and this: http://www.tractorbynet.com/forums/buying-pricing-comparisons/63522-has-anyone-every-heard-allied.html
  42. Replies
    22
    Views
    1,426

    Re: Cutting Mixed Metals

    I joined the local hackerspace and they have 3-phase high voltage power. A CNC plasma is on the list of projects for the space.

    I talked to the Jet Edge guy at a trade show I seem to remember a...
  43. Replies
    18
    Views
    2,443

    Re: Small farm hay balers

    Obviously this is the best way.
    https://www.youtube.com/watch?v=XwfLJ6Cbj2c
  44. Replies
    3
    Views
    437

    Re: KAMA TRACTOR KM544 PARTS NEEDED

    Some online parts:
    FD Diesel Engine parts - Shop Cheap FD Diesel Engine parts from China FD Diesel Engine parts Suppliers at China Tractor Parts Co., Ltd. on Aliexpress.com
  45. Replies
    3
    Views
    437

    Re: KAMA TRACTOR KM544 PARTS NEEDED

    Here is contact info: SHANTOU AGRICULTURAL MACHINERY EQUIPMENT CO.,LTD.
    China KM554 Tractor- Medium tractor


    Unfortunately, since your country is widely known as the source of criminal fraud on...
  46. Re: Your opinion on which is the right tool for the job

    Here's a video of a disk harrow going over some soil that looks like clay.
    https://www.youtube.com/watch?v=Ks_3lwiEDUY

    Another video
    https://www.youtube.com/watch?v=Wxb8O_rwldQ

    Is Hanmey your...
  47. Replies
    40
    Views
    4,104

    Re: Blown engine; rebuild or replace with new

    Your machine came standard with 3 different engines so I imagine the mounting is pretty standard.
    Specifications

    Seems to be several choices around $500:
    17.5 HP BRIGGS & STRATTON VERTICAL...
  48. Replies
    17
    Views
    2,101

    Re: How to flatten a washboard lawn.

    It might be worthwhile to contact your county extension office to see if they know of any local successes in dealing with your problem. UWEX Cooperative Extension--County Offices
  49. Re: Your opinion on which is the right tool for the job

    A box blade is not an ideal tool for tilling soil. You can tilt it forward and just use the rippers. Unless you're moving dirt the accumulation action of the blade is not helpful when tilling. It may...
  50. Re: Jinma 304 position control appears to be stuck

    The only other thing that wasn't mentioned is that it looks like you have draft control. Of course make sure you are moving the correct lever. It looks like yours are labeled. Also make sure the...
  51. Replies
    18
    Views
    2,443

    Re: Small farm hay balers

    Earth Tools sells the CAEB.
  52. Replies
    7
    Views
    1,706

    Re: Need your advice on tillers!

    Plenty of good advice. I just want to point out that a new TroyBilt Big Red at $2500 is not less expensive than a comparable Grillo or BCS.
  53. Replies
    32
    Views
    3,940

    Re: Need advice on welding machine purchase

    I guess the reason for the price difference is apparent in the product labels. Made in Finland vs. PRC. Did you get a quote on the EVO 180?
    ...
  54. Re: Any here ever used one of these? Do they work?

    On average it takes me 3 walks without a spotter to hook up to my 2-axle equipment trailer. With a spotter it's 4.
  55. Replies
    24
    Views
    2,306

    Re: Water line easement -- why?

    According to this short article, the value of the easement is at least the full fair market value of the area of the easement. How to Appraise a Value on a Property Easement | eHow

    www.Zillow.com...
  56. Replies
    50
    Views
    4,692

    Re: drilling a hole 12inches deep???

    Here's another vendor. They had the best shipped price I could find for a couple of pieces of DOM I recently ordered.
    The Best Place To Buy Metals & Industrial Supplies Online | Buy Metals Online |...
  57. Replies
    32
    Views
    3,940

    Re: Need advice on welding machine purchase

    That makes me feel better about the Kemppi.

    If it was me and I was set on that brand it would be a tough decision whether or not to upgrade to the 180 EVO if it's priced only 25% higher.
  58. Replies
    32
    Views
    3,940

    Re: Need advice on welding machine purchase

    The price seems high compared to this Miller at the same web site assuming you can get a similar discount. : Buy Miller 160Si DC MMA Inverter Package with Cable Set, 230v - Welding Supplies from...
  59. Re: Is "breakout force" the amount a loader will lift?

    I seriously doubt they would change the definition of breakout force with any revision to the specification.
    Breakout force is lift cylinders only. It's so much higher because of how the...
  60. Replies
    2
    Views
    1,211

    Re: LITTLE HELP FOR NEIGHBORS TILLER

    Good work. Those dirt daubers are a nuisance.
  61. Replies
    26
    Views
    3,174

    Re: Mail Pouch Barns

    This company should know the rules. Barn Owners : Barn Painting & Advertising
  62. Replies
    23
    Views
    1,789

    Re: One wheel tractor?

    A gasket thinner than stock will increase the compression ratio and possibly cause a valve interference issue. If enough of the original gasket remains to measure thickness you can try to match it....
  63. Replies
    23
    Views
    1,789

    Re: One wheel tractor?

    You can order a little piece here: ASTM B370 110 Copper Sheet | Buy Online | Cut to Size | No Minimum Order

    Aluminum is much less expensive and easy to get. Here are some annealing instructions:...
  64. Re: Drilling Hole Down the Middle of a Four Foot Long 6X6

    They do sell hollow 6x6 columns treated for ground contact....
  65. Replies
    26
    Views
    2,711

    Re: Everything Attachments Box Blade Review

    Congrats on a sweet new implement.

    I just bought their lighter landscape rake in 72". Still quite a bit stouter and feature laden than any of the price leaders and only $150 more. I picked it up...
  66. Replies
    41
    Views
    2,287

    Re: Horse Manure as fertilizer ?

    Apparently some of the hay we bought for the horses a couple of years ago had been treated with grazon. Ruined our garden that year.
  67. Replies
    8
    Views
    855

    Re: Caroni replacement belts source?

    I've had decent service from these low cost sources:
    Vbelts4less - Mower V Belts - V-Belts - Banded V Belts - Kevlar V Belts - Cogged V Belts - Industrial V Belts
    USA Bearings and Belts
  68. Dealer Re: Need to buy a new engine for our power trac pt422

    If you want to go cheap, Harbor Freight makes a Predator engine in that size now. If you download the manual the critical dimensions are on page 31.
    22 HP (670cc) V-Twin Horizontal Shaft Gas Engine...
  69. Re: Old Airplanes, flyover Northern VA and DC specific

    I always knew the P47 as the Thunderbolt. My neighbor took me to an EAA meeting around 1980 and the guest speaker was a WWII Thunderbolt pilot.
    Here are some restored Thunderbolts: ...
  70. Replies
    34
    Views
    3,453

    Re: Is There a Kioti that can lift 2000 lbs ?

    Does anyone else think of this whenever they read the title?
    http://vignette4.wikia.nocookie.net/looneytunesfanon/images/c/cf/Road-Runner-si-Wile-E-Coyote.jpg/revision/latest?cb=20130823185844
  71. Replies
    9
    Views
    2,075

    Re: Agria 77010G

    The Agria 7700 looks pretty similar. Have you tried contacting Agria directly? Service
  72. Replies
    3
    Views
    774

    Re: Jounrney with Jinma 164Y

    Nice work. I was wondering what happened to your earlier thread.
  73. Replies
    30
    Views
    2,506

    Re: Armadillo Antidote

    I had a groundhog that kept undermining the corner of my property. I set a Conibear style kill trap over the hole and staked an old wire rabbit cage over that to prevent killing the dogs or cats. He...
  74. Replies
    39
    Views
    3,341

    Re: Building a fence - Backhoe or Auger?

    I have a 4" auger I use for landscape timber line posts. I pour dry sand in to fill the small space with minimal tamping. I wiggle the post to get the sand to settle and get it as plumb as I can....
  75. Re: Need dual spool valve for belarus 250AS

    Try here: Belarus Tractor International -- US Distributor of Genuine Belarus Equipment & Parts

    Otherwise you could possibly re-plumb to a generic valve from Baileys or Surplus Center.
  76. Re: Wind Turbine ********. Just opened the mail and seen the plan for three massive u

    HVDC transmission is becoming popular and the lines can be buried. I suspect there would be very little EMF produced.
    High-voltage direct current - Wikipedia, the free encyclopedia
  77. Re: massey ferguson 148 FEL won't lift front wheels off ground, but can lift loads

    You may want to give it more time. When you lower the loader it is easy to outrun the pump and create a void in the cylinders so it takes a while for them to fill up again before you get any lifting...
  78. Re: Anyone have any experience or opinions on new McCormick X1.25?

    According to the manufacturer it's made in Italy and they have no presence in Asia. The Plants - Argo Tractors - Argo Tractors S.p.A. - Landini, McCormick, agricultural equipments, tractors,...
  79. Replies
    3
    Views
    730

    Cool engine teardown video.

    Okay, it's not a tractor but I thought this was a good place to share it. Not my video.

    https://www.youtube.com/watch?v=daVDrGsaDME

    It is making the rounds on Facebook as some 3rd party is...
  80. Replies
    20
    Views
    1,995

    Re: Attention Machinists

    A shop with a wire EDM could knock that out pretty easily. Xact has pretty good rates.
    https://www.youtube.com/watch?v=pBueWfzb7P0
  81. Replies
    7
    Views
    1,251

    Re: Rotary Cutter Cracked Deck Repair Advice

    I've seen arcs traced by the blade tips but that's the first time I've seen one traced by the pivot bolts.

    If you can remove the blade carrier and pull the gear box it should save you some money...
  82. Backhoe Re: Looking for the pin that goes through the bucket on a Kubota BH77 backhoe

    From the Kubota website:

    050 7K503-42610 PIN
    From this page you have to click "accept" then enter BH77 as the model.
    Kubota Tractor Corporation - Parts List
  83. Re: 2" receiver mount for Harbor Freight 12,000lb winch

    That plus a bipod to keep it from flipping around under tension. Lets see, then it needs wheels so you don't strain your back getting it into position. Maybe you should just mount a rail to the belly...
  84. Replies
    2
    Views
    616

    Re: TroyBilt Horse

    Nice score.
  85. Replies
    4
    Views
    739

    Re: Do you know what this is?

    Umbrella stand base? Victorian Stick Umbrella Stand | 172049 | Sellingantiques.co.uk
  86. Re: Mower goes in reverse for all forward gears and forward and fwd when in reverse!

    It sounds like your belt is routed wrong so it is turning the transaxle pulley backwards.

    Look at the diagram on page 24 here:...
  87. Replies
    40
    Views
    3,825

    Re: PTO Log Splitter

    Good job on the splitter!
  88. Replies
    4
    Views
    753

    Re: 3pt Log Splitter

    The Northern Powerhorse (China) splitter is the same price and doesn't include a stand. I think the stand will make it a lot easier to hook up. The Speeco seems like a better value.

    If it was me...
  89. Replies
    2
    Views
    331

    Re: Rice growing course online.

    That is really cool. I remember seeing some smaller fields nestled in the mountains in Japan but nothing like that. Here's a little video I took from the train with some typical fields visible....
  90. Replies
    2
    Views
    331

    Rice growing course online.

    I came across this and found it interesting. I have spotted a few "hondas" in this area of NC. (Honda means "main rice field" in Japanese, toyota means "bountiful rice field")
    Module 1
  91. Re: Convert Chinese Backhoe to Prince BH Control Valve Assembly?

    That prince valve looks like a good one. The longer joysticks should help reduce the effort required to operate it. With stacked valves in the unlikely event one spool goes bad you can replace it at...
  92. Replies
    16
    Views
    1,516

    Re: Where to buy a silt scoop

    I guess you mean one of these for dredging a pond? It may not be too hard to make one.
    Pederick Engineering, Rural and Agricultural Equipment

    Here is a related thread....
  93. Replies
    60
    Views
    21,886

    Re: pto driven log splitter

    You mean this? I have one and it works well. Model LS3060 Rapid Extend Log Splitter
  94. Replies
    5
    Views
    307

    Re: New Member from Wisconsin

    How 'bout them Badgers?
  95. Replies
    75
    Views
    6,201

    Re: How do you light your bonfires?

    I thought my HF weed burner was the heat. Then I saw this. https://www.youtube.com/watch?v=v2iD9iNfh0U
  96. Replies
    39
    Views
    2,436

    Re: Where to buy a metric bolt

    I recommend rethreading a bolt rather than the tractor. If something goes wrong you can always get another bolt.
  97. Replies
    31
    Views
    2,752

    Re: Plugged grease passageway

    I don't think that would have worked since his passage was open on the far end but that's a great price on that tool. The common version is usually about $50.

    Prompted me to look on Amazon for a...
  98. Replies
    6
    Views
    1,399

    Re: hardened cutter cheap to free

    Sounds like a business opportunity if you can buy as scrap and resell as finished product.
  99. Replies
    31
    Views
    2,752

    Re: Plugged grease passageway

    Good work!

    Congrats by the way on owning a mini excavator. That's one of the coolest machines on the planet.
  100. Replies
    12
    Views
    1,370

    Re: frost free Hydrant problems

    Mine acted strangely during our last cold snap. I got 5 gallons and then it quit. It turned out to be the nipple to the pressure switch for my well pump that froze.
Results 1 to 100 of 1911
Page 1 of 20 1 2 3 4
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.