Search:

Type: Posts; User: Wyobuckaroo; Keyword(s):

Results 1 to 100 of 376
Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    16
    Views
    1,619

    Re: 3pt Mounted Snow puller?

    I use my FEL and a 5' back blade with a homemade wing and skid shoes for snow...
    This is on my older JD 855...
    Not pretty..... But.... works well for me..
    Good luck...
    ===
    403793
    ===
    403794
  2. Mid-Mount Mower Re: How are you guys lifting a mid mount mower upright for winter storage

    I use a set of home made axle shafts and set of old lawn mower wheels to store my deck upright...
    They aren't very pretty, fit kinda loose, but work just fine... And were cheap to put together.......
  3. Replies
    50
    Views
    4,535

    Re: Put my Chains on Today

    It is the time of year.... I put my chains on Tuesday and move snow...
    Had to move this first snow of the season.....
    Then wait until today for the township snow plow to come around before I...
  4. Replies
    6
    Views
    2,166

    Re: This is why...

    **** YA....

    I would go for it as quick today as I would have 40 some years ago....
    Just would take longer to heal up from the experience today than back then....

    Hold my beer, and watch...
  5. Replies
    4
    Views
    595

    Re: Category 1 Dimensions

    Good info, but just a little incomplete...

    When I looked up the same info, when I was building some of my projects, it was easy to find the width of Cat1 attachments, and the pin sizes....

    But...
  6. Replies
    17
    Views
    903

    Seeders Re: Trailer wheel on 2 bottom plow

    I just did a Google search of ..... massey ferguson model 43 two bottom plow.....

    Found several pictures.... Some show the long land side plate bent away from the side wall of the furrow at the...
  7. Replies
    4
    Views
    1,075

    Re: 59" jd snowblower?

    I have a 59" JD front blower for my 1987 JD855....
    That particular model blower is/has been used on a number of models over a number of years..
    Of course the attaching hardware is all dedicated to...
  8. Replies
    3
    Views
    1,303

    Re: My brush forks...

    Nice build.....
    This kinda/sorta what I have in mind to build for my tractor...

    Only difference will be I plan to hook the lip of the bucket under a full length clip...
    And bolt brackets to the...
  9. Replies
    44
    Views
    3,946

    Re: How Do You Keep A Draw Bar From Spinning?

    This is my homemade multiple use draw bar, receiver hitch, short skidding boom pole, ballast weight bracket, middle buster, sub soil, yet to be invented tool tow bar...
    Good luck..
    ===
    390839
  10. Replies
    2
    Views
    576

    Re: Cart Run Flats

    I also had trouble this spring with the small tires on my garden wagon and gauge wheels on my home made 3pt thatch rake...
    They were all 10" wheels from China like you would get at Harbor Freight...
  11. Re: 94BULLITT's Home Built 3 Point Hitch Dethatcher

    ===
    The total unit weighs something less than 200#.... Like said, I have an identical tool bar with 21 chisel shanks about 12" long... They bolt on and are infinitely adjustable.... With gauge...
  12. Replies
    13
    Views
    1,253

    Re: Ute fuel tanker

    Looks interesting.....

    Yes... A 3/4-1" (20-25mm) tube frame/stand/cage would be a good choice to haul/move/protect the tank..

    What brand tank, capacity is that ??
    Where did you get it.. ??
    ...
  13. Re: TURF DETHATCHING IMPLEMENTS; Three Point Hitch Mounted

    Here is a picture of my homemade thatch rake... It is 5' long on one of my universal tool bars..
    It is set up to run on the 3 pt... Or I can turn it around and run the same set up on a front mount...
  14. Replies
    3
    Views
    380

    Re: Fender Lights for JD 855

    I replaced one on my 855 something over a year ago...
    I took it out, and replaced it with a bulb of the same number...

    It was a common brand, GE, Phillips, I don't remember.. Or remember the...
  15. Replies
    88
    Views
    7,319

    Re: Any Pilots Among Members?

    I've mashed a few bugs in my day.... Variety of old Cesna models...
    Got to have a little time in a Super Cub on floats...

    Like said... Long time ago, far away....
    Enjoyed every minute of it..
  16. Replies
    25
    Views
    3,934

    Re: How long does a tractor snowblower last>

    My JD 59" front blower could be close to 25-30 years old...
    It came with the correct mounting hardware to fit my JD855, which is a 1987 year model..

    I suppose I could try to track down an exact...
  17. Thread: chains

    by Wyobuckaroo
    Replies
    25
    Views
    2,365

    Re: chains

    For the last 3-4 winters I have used 2 link ladder chains, non V bar....
    I use them on loaded 33" turf tires on my older JD855...

    The chains are John Deere... Fit well... And I use bungy cord...
  18. Replies
    40
    Views
    2,091

    Chains Re: What chains to buy for snow?

    On my gravel drive and road.... I use 2 link ladder chains, without V bars... My tractor has loaded, 33" turf tires....

    Your road surface, tires, and other equipment differences may require...
  19. Re: Front mount snow blower disassembly question

    Without seeing it.... It sounds as the shaft metal around the hole has been displaced into the worn hole in the gear and is keeping the gear/shaft from coming apart... You may have to just press the...
  20. Replies
    19
    Views
    1,131

    Re: Aerator shopping for horse pastures

    If it were my situation.....

    With the soil type you describe, perk results, and all conditions considered in your location..... I'd go for it...
    It seems you have nothing to loose... Just the...
  21. Replies
    13
    Views
    2,703

    Re: Another stick rake

    G'day....

    Great build.... Sometimes quick and easy builds are the most useful.....

    When you have time, and with that size tractor, I presume you have a good sized back blade with angle...
  22. Re: How do I determine the model year of my Kubota b7800?

    Look up your make and model on "TractorData" dot com......

    It should give you a list years made and serial numbers for the years...

    Good luck...
  23. Replies
    14
    Views
    1,646

    Re: Subsoiler for small stump removal???

    I have used my home made sub soil tool as said to cut roots all around stumps to aid removal...

    Also, like said, leave the stump 6 - 10" tall so you can get over the stump with the sub soil tool.....
  24. Replies
    13
    Views
    2,539

    Re: Raised bed hiller

    I also went the home built route...
    Works well enough...

    Good luck
    ===
    378697
  25. Re: Unknown brand of post hole digger - Any ideas?

    The 3pt frame and arm look like the King Kutter at the local farm supply store...
    The gear box looks the same as my older model Speeco...

    I took out the filler plug on my gear box, turned it over...
  26. Replies
    115
    Views
    7,239

    Re: I have a favor to ask you about your posts

    I too have to say at minimum all posters should list the state they are in...
    Most states are big enough that this much info will give away there location....
    Personally, I don't care.... But it...
  27. Replies
    27
    Views
    2,816

    Re: Can I use this to drag logs?

    Like shown in post #2...... The 3pt is good to lift the end of the log... Makes skidding MUCH easier...

    However.... I always do my pulling with the fixed draw bar... To pull with the 3pt up,...
  28. Replies
    59
    Views
    8,302

    Re: Pictures of your Tractor!

    My most useful tool... 1987, JD 855... About 915 hours... Second owner...
    Setting my wind sock and bird feeder tower....
    Enjoy
    ===
    377578
  29. Replies
    6
    Views
    1,137

    Re: Stumped! What a difference a ton makes

    Here is one of several that I have wresled out of the ground here on the rock pile....
    This is about all that my old tractor and I can handle.....

    The ones that are 30" or more in diameter that...
  30. Replies
    44
    Views
    5,573

    Re: Filled my rears. WOW

    I did a DIY job of filling my 33" turf tires.... Like said, made a BIG difference in how it handled in snow, loader work, and with field work type implements that I use... The extra weight doesn't...
  31. Re: 94BULLITT's Home Built 3 Point Hitch Dethatcher

    Neat......

    I built kinda/sorta the same thing.... Mine is 5' wide and attaches to one of my somewhat universal 3pt tool bars...
    When I get my front 3pt lift built for my tractor, I can reverse...
  32. Replies
    10
    Views
    1,140

    Re: TSC caryall ballast barrel

    Kool.....

    Am curious...... What do you think it weights ???
  33. Re: 12v Accessory Outlet .... How Best to Do on Tractor?

    I also did a quick and dirty, direct to the battery set up...
    Fuse holder, cigarette lighter type plug..
    Pull the fuse, stow the plug away up under the hood when not needed...
    I have only run a...
  34. Re: Disc harrow: pull behind or 3 point hitch?

    I built this 5' tool bar a couple years ago....
    The wheels will adjust to let it dig 1.5" to 6.5" deep... All the teeth are removable and adjustable for spacing as needed to dig, or cultivate...
    I...
  35. Re: Washer fluid for rear tire ballast question

    I did a fill of my 33" tubeless turf tires myself... Each at 22 gallons...
    For my max winter temps, I used a mix of 5 gallon antifreeze, and 17 gallon -20* washer fluid...

    I watched for fluids as...
  36. Re: Retrofit a front L&G Dethatcher to my JD 1026R SCUT?

    ===
    Again, I am going to fab an independent full size cat 1, 3pt for the front.... Thinking it will be more useful than an adapter off the MMM front bracket adapter... On your tractor the front...
  37. Re: Retrofit a front L&G Dethatcher to my JD 1026R SCUT?

    ===
    Again, I am going to fab an independent full size cat 1, 3pt for the front.... Thinking it will be more useful than an adapter off the MMM front bracket adapter... On your tractor the front...
  38. Replies
    7
    Views
    973

    Re: DR Mower/Trimmer for 3-pt hitch

    Looking at the pictures in the sales page, I wonder if you couldn't get a spare string head (ball) and alter the top bushing shown to cut closer to the upper plate... Or fabricate a string holder,...
  39. Replies
    20
    Views
    2,944

    Re: Pole Barn construction

    With the extreme snow load we have had in this area this winter.....
    There were a lot of pole barns of many types and ages that collapsed...

    The common thing seemed to be middle came down but the...
  40. Re: Retrofit a front L&G Dethatcher to my JD 1026R SCUT?

    There has been some things done like that....
    Seems not a lot and not often...

    I built this thatch/gravel/yard rake that I can use on one of my universal 3pt tool bars...
    I plan to build a bolt...
  41. Replies
    15
    Views
    890

    Re: Tuthill diesel pump problems

    Hmmmmm..... If you run the pump and there is no suction, I got to think it is an air leak somewhere....

    Can you immerse the suction end in a 5 gallon container of fuel... Wrap a rag around the...
  42. Replies
    13
    Views
    740

    Re: Sharpen tiller blades??

    There is, or used to be a couple "weld on" hard surfacing products....
    One you put on with a oxy acetylene torch much like brazing rod...
    The other was an ark welding type rod...

    The way it was...
  43. Re: Raking the Yard with 3pt. Pine Needle Rake

    It makes sense that it would work OK....

    I use this homemade rake to pickup lots of stuff, thatch, rake gravel out of the grass area where I have piled snow....

    Good luck
    ===
    370082
  44. Replies
    6
    Views
    731

    Re: Low speed chase in Alberta

    If some bone head took my stuff let alone wrecked my tractor just to fuel his meth or what ever habit..... I would like about 3 minutes alone with that person to express my hurt and disdain for...
  45. Thread: 3pt hitch

    by Wyobuckaroo
    Replies
    4
    Views
    977

    Re: 3pt hitch

    ASAE S217.12 DEC2001 (ISO 730-1:1994) (R2007)
    Three-Point Free-Link Attachment for Hitching Implements
    to Agricultural Wheel Tractors
    ===
    This can be a little bit of a pain in the neck to look...
  46. Re: So, look what followed me home from the woods today

    FG19..... Great find.....

    It appears to have been a horse implement ???
    If so, now you have to build a 3pt adapter to bolt it to so you don't have to cut, drill, weld on it to preserve the...
  47. Re: Ground Hogs (aka Wood Chucks) Digging in Pole Barn

    When I was forced to deal with them causing damage around buildings..... I used the live trap, and 22 short method of control...
    Bait live trap with apple slices.... I had more than one trap, so...
  48. Thread: PHD deals

    by Wyobuckaroo
    Replies
    1
    Views
    252

    Re: PHD deals

    I bought a Speeco that cleaned up well....
    Looks good in green and yellow...
    For the amount of use I need on this rock pile, I'm glad I didn't have to put much into it..

    Good luck...
  49. Replies
    24
    Views
    15,467

    Re: Raised Bed Maker

    This is what I built to hold shanks on a 5' universal tool bar...
    Works OK.
    Good luck
    ===
    364078
  50. Thread: Post Hole

    by Wyobuckaroo
    Replies
    19
    Views
    1,245

    Re: Post Hole

    When I sheared the bolt in mine..... There is another bolt that runs in a groove on the shaft to keep the pto shaft from coming off the gear box...
    I got it all apart, cleaned up, de burred with a...
  51. Replies
    39
    Views
    2,592

    Re: 3 PT Dethatcher

    This is the second version of a thatch rake I built...
    It is quite aggressive, but works well...
    I plan to build a front mount 3pt lift for my tractor..
    That way I can reverse the rake on the...
  52. Replies
    16
    Views
    2,061

    Re: One horse power wood splitter

    Interesting......
    Wonder where this is located ???
    That appears to be a modern, newer model DR brand mechanical splitter.... Not a cheap item as it is...
    I am more interested in the details of...
  53. Replies
    2
    Views
    704

    Price Check Re: Good price on a john deere 855

    I got my JD855 from a local dealer... It was a summer cabin queen on the lake here...

    Go to this site for good info to start from...
    Good luck
    ===
    tractorhouse.com
  54. Replies
    248
    Views
    73,492

    re: Home-made attachments...

    ===
    Wish I had an attachment like that years ago when putting up and taking down wood lath snow fence.... Would have been real handy...
    I don't think snow fence like that is used much anymore... ...
  55. Re: Good landscape rake - cheap (Part 2 - Daver1963's attempt)

    Like in post 14, that is how my 3 rows of times are set up....
    With the wheels as they are in the picture, it rakes 3/4" deep... There are 3 holes in the legs, at 1" apart to adjust the wheels up...
  56. Replies
    15
    Views
    1,328

    Re: A really old mystery attachment?

    From stuff I've seen in this area, I agree, apple and or potato size, grade belt....

    I bet there is a steam/old machinery club close that would appreciate a donation like that....
    Bet you would...
  57. Replies
    12
    Views
    1,256

    Re: Amazing wood chopper

    R
    ===
    Here is a video of the kind of chipper shown in reply post #4.....
    It appears it make a course type of landscape style mulch/chip product...
    I have seen both wood heaters and outside...
  58. Replies
    6
    Views
    1,008

    Re: building a culitivator?

    I built mine with strait shanks that hold chisel points..... From Farm and Fleet...
    Not perfect, but useful....
    Good luck
    ===
    359697
  59. Replies
    44
    Views
    2,809

    Re: Using propane instead of acetylene

    When a good friend of mine took over his dads old auto salvage business, I converted his yard torches to propane.... It was enough years ago now that it was a major money saver at that time.....
    ...
  60. Replies
    12
    Views
    1,256

    Re: Amazing wood chopper

    According to the videos, the pto on those tractors turns counter clock wise.... I don't know how fast...
    Even on the chippers that look home made there is a lot of good engineering and quality...
  61. Replies
    12
    Views
    2,425

    Re: Water tote trailer

    Nice set up....
    However, I do have a question...... Have you run it long enough to know if engine vibration is a problem with the pump being piped into the tank with rigid fittings ??? I'm...
  62. Re: YABB; A ballast box that actually started life as a (tool) box finally finished

    NICE......
  63. Snow Re: Anyone Have Experience With 59-inch Front Snow Blower?

    Neophyte
    Can you post a picture of front on of the tractor part of the 3pt hitch.... ??
    And also of the blower installed ont eh 3pt....
    I have a 59" blower on my 855 and am thinking of building a...
  64. Replies
    16
    Views
    1,524

    Re: I want to modify my snowblower...

    A place to start....
    Mount brackets on the back side of the arms where the 3pt attaches.... Gets it back far enough to block snow, look over...
    Put a triangle shaped enclosure on the sides of the...
  65. Replies
    25
    Views
    2,280

    Re: Son of a......

    SON OF A LUTEFISK....... It has been cold here in northern WI....

    I have pushed snow an average of once a week here.... Not much at a time maybe..
    But very steady at it... Township is getting...
  66. Replies
    7
    Views
    381

    Re: Bean harvest

    ====
    Bwahahahahahaa..... Great humor..... That is funny, I don't care who you are....

    "If you buy groceries, so you can reuse the containers..... Your a tractorholic" One of us.....

    Now go...
  67. Re: Need help on estimating shop lighting requirements

    Bwahahahaa..... "At 55 you need more light than you did at 25"....... That's me.... And so true....

    My experience with adding onto a machine shop is that the pros can figure the light minimum...
  68. Re: Good landscape rake - cheap (Part 2 - Daver1963's attempt)

    Neat.... Some times things made quick and dirty seem to work the best....

    If you decide to add another bar and row of teeth, staggered with that set....
    Let me tell you from my experience to...
  69. Replies
    47
    Views
    5,710

    Re: 3 Point Log Skidder

    Here is a combination receiver hitch/short boom poll that I have used to skid logs with...
    I use it for a multi purpose tool platform....

    I lift the log with the 3pt, short boom.... But pull...
  70. Replies
    248
    Views
    73,492

    re: Home-made attachments...

    Goodness..... Things I have built....
    None are fancy.... Useful, but not pretty... I know I'm the worlds worst painter... But I don't care...
    Enjoy
    ===
    355322

    355323

    355324
  71. Replies
    16
    Views
    2,725

    Re: Chisel plow on sub-compact tractor.

    I have an older JD large frame compact (24hp, hydro, turfs)
    I pull my home made 3pt chisel attachment with 21 staggered shanks.... That equates to 6" spacing in each row, and 3" spacing over the...
  72. Re: The First Beast is Complete..Serious BoxBlade!!

    HOLY--MOLY....
    "Beast" is about the right term....
    Which coal mine it it going to ??
    Looks nice...
  73. Re: How to pull broken 4x4 fence posts that were concreted in. (pics and video)

    Thanks for the post!........ Bwhahahahaha Good play on words about pulling posts..... snicker....
    ===
    Good thinking.....
  74. Replies
    33
    Views
    5,279

    Re: one more land plane build

    Here is a thought......
    Cut the beam in 3 equal lengths.... Use 2 of these as sides..... Build an angled blade grader..... Flip it over and build a strait blade grader....
    Build your 3pt...
  75. Replies
    6
    Views
    1,131

    Re: Ultimate Shredder Idea......

    ====
    Yes... I have thought about the "reverse when jammed" thing..... Definitely a job for a slip clutch.....
    I guess it would be like any other pto chipper, chipper/shredder, if it jammed you...
  76. Replies
    6
    Views
    1,131

    Ultimate Shredder Idea......

    Has anyone put together this style of shredder that is PTO powered ???

    Think it could be about 2' long, with maybe 8" diameter chippers.
    And run on 20 or less PTO hp ???

    Facts, ideas, facts,...
  77. Replies
    2
    Views
    411

    Ballast Re: Free CaCl???

    After a number of years of using sale, if you think the cost of new rims will be equal or less than other products....... Go for it.....

    I would recover the fluid into plastic barrels and use it...
  78. Re: HELP! Major storm coming and block heater not working!

    For a short term solution.......
    I have heard people using a hand held heat gun in the air intake for a minute or two to preheat before turning the motor over.... And keeping it there as the engine...
  79. Replies
    21
    Views
    8,838

    Re: Tire Chains adjustment and questions

    I run a set of 2 link ladder chains with 33" turf tires on my older JD855.
    There are 21 cross links so I use 3 equally spaced bungee cords on the inside.
    And 2 bungee cords with 3 hooks each on the...
  80. Replies
    21
    Views
    5,664

    Re: Anyone Build a Simple 3 Pt Hitch Crane?

    I have a short lift arm that works with my 3pt receiver hitch....
    I have been thinking about extending it with a 5' arm and a knee brace to use as a 3pt boom pole...
    Kind of an Erector set...
  81. Replies
    29
    Views
    7,227

    Re: Brush Forks for 23HP Kubota BX2350

    I also have some tentative plans drawn up for a set of brush forks like that....
    I'm going to do a chain on attachment around the bucket with chain binders to keep from drilling holes in the...
  82. Re: How do I keep gravel out of my yard when plowing snow??

    I have given up keeping gravel out of the yard.......
    I have resigned to pushing all the snow I can into a spot that I often use for an extra parking spot.....

    Good luck...
  83. Re: From which side do you mount your tractor?

    It is easy enough to use either side on my JD855.....
    Like said before...... I normally mount and dismount from the left side....

    I was ask why I do that... Only answer I could think of was...
  84. Replies
    13
    Views
    1,120

    Re: Bolting tire chains to rims?

    I run 2 link ladder chains on loaded 33" turf tires.....
    Cost something less than $200 from a JD dealer.....

    Going into my 4th winter with them now. They show minimal ware...
    I keep them snug...
  85. Replies
    0
    Views
    662

    3pt Thatch Rake Rev 1....

    OK.... So somewhere there is a post about the 3pt thatch rake I built.... It worked OK, but not great....
    So now this is revision 1..... I spread the rows of teeth from 4" to 11" apart... There...
  86. Replies
    14
    Views
    1,621

    Re: Log of steel

    Make a spike areator. Make a cultipacker. Lawn roller...... Ballast weight.....

    Good luck
  87. Replies
    5
    Views
    1,417

    Re: Homemade Toolbar For My Ford 8N

    NICE......

    I have 2 tool bars 5' wide that I have made accessories for.

    You will enjoy building things to use with it...

    Enjoy
  88. Replies
    2
    Views
    767

    Wing, Wing........

    No..... I'm not talking about installing a phone in the bird house..... chuckle......

    I did a kind of quick and dirty build of a wing for my 5' back blade while I was working on other projects...
  89. Re: Guestimate of weight of unfilled 15x19.5 R4 wheel and tire?

    I can't find the chart I used a couple years ago when I filled my big turf tires....
    But here is a chart that may help.... I found several charts with a search of "tractor tire liquid capacity"
    ...
  90. Replies
    28
    Views
    3,219

    Re: 21HP CUT and a blower... am I dreaming?

    I have an older JD855 with a JD 59" front blower. Tractor is rated 19 hp for pto. I would presume front pto as well as back....
    It works well. I'm told if I were to opt for a rear 3pt blower the...
  91. Replies
    18
    Views
    3,369

    Re: 3pt Thatch Rake....

    -----------
    Neat set up.....
    In my version 2, I'm going to spread the rows of teeth further apart so they self clean when the implement raised.....

    Good luck...
  92. Replies
    22
    Views
    1,904

    Re: AG/Off-Road Diesel Availability

    I live in the woods about 3 miles north of the last corn field or dairy farm.
    Every station on the border surrounding town sells farm diesel at a pump....
    They will also carry K1 kerosene at the...
  93. Replies
    18
    Views
    3,369

    Re: 3pt Thatch Rake....

    ------
    Neat......
    Is that home built ???? If not does it have a makers/model tag on it ???
  94. Replies
    9
    Views
    797

    Re: Loaded Tires: Water only?

    Around here where winters can go to -40* in the winter. In your area, I would still use 10% minimum auto antifreeze. For the anti rust agents and such in it....
    I don't think one gallon in a 20-30...
  95. Replies
    9
    Views
    2,473

    Re: Implement dollies.

    What was said in post #3..... For instance, I also made a dolly for my 59" front mount snow blower... And use a ratchet strap to hold it securely to the frame.

    Most things can be set up to...
  96. Re: Remote control for gate release / auto closer

    How about a drop gate on the remote.
    And a normal swing gate for the other 99.9% of the time you go in and out......

    Good luck
  97. Replies
    18
    Views
    3,369

    Re: 3pt Thatch Rake....

    "Move the rows of teeth about a foot apart"....... "Won't plug up as much".......

    Good idea..... Sounds like a version 2 that I might have to try next summer....

    Keep the good ideas...
  98. Replies
    17
    Views
    1,442

    Re: Current rimguard prices? Tube or tubeless

    From the inside of a tire...... It don't matter what color the tractor is....
    So I did it myself to fill my tubeless R4s (22 gallon each) with anti freeze and windshield washer fluid.
    The...
  99. Replies
    15
    Views
    1,788

    Re: Keeping snakes out of chicken coop

    I've heard about this before.......

    Like said in post #9...... People will use wooden craft eggs or golf balls.... Put them in the nests so they smell like chicken.
    The snake swallows one and...
  100. Replies
    18
    Views
    3,369

    3pt Thatch Rake....

    I tried to post this earlier.... Computer must have ate my post....

    OK..... So I've had this rattling around in my head a while. Now finely got it together..... So to speak....

    I built a 5'...
Results 1 to 100 of 376
Page 1 of 4 1 2 3 4
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.