Search:

Type: Posts; User: Hammsman; Keyword(s):

Results 1 to 29 of 29

Search: Search took 0.01 seconds.

  1. Thread: Eatin' belts

    by Hammsman
    Replies
    58
    Views
    4,172

    Re: Eatin' belts

    If you take the time and trouble to pull the bearings there is no way I would put the old ones back in no matter how good they look. Not that costly to replace and be sure you didn't miss anything. ...
  2. Thread: Eatin' belts

    by Hammsman
    Replies
    58
    Views
    4,172

    Re: Eatin' belts

    One remote possibility if you are mowing tall heavy wet grass and the belt is slipping and burning as you mow and develops weak or stretched areas which causes the flopping in time. If this is true...
  3. Re: How do you like your 62D drive over mower deck?

    We have the 2008 model which has an adjustable link in that rod that makes it easy to lengthen or shorten it to get the proper height. I have read on here that some model don't have the link and is...
  4. Re: How do you like your 62D drive over mower deck?

    I'm sure there are minor differences from tractor to tractor but on ours by adjusting the rod from the 3 point to the deck raising mechanism the normal home position of the full up 3 point lever was...
  5. Re: How do you like your 62D drive over mower deck?

    The way to know the 3 point is raising the deck high enough is to be able to spin the height control knob continuously past 360 degrees with NEVER hitting anything to stop it. You will have to lower...
  6. Re: How do you like your 62D drive over mower deck?

    If the 3 point is lifting the deck up as far as it should, you should be able to spin the height adjustment knob all the way around without hitting any stops when the deck is in the full up position....
  7. Replies
    36
    Views
    5,929

    Re: 62D Mower Deck - I'm tired of scraping it!

    We have the 62D deck and use the built in water hose cleaning adapter. It cleans the deck perfectly with nothing left under the deck. To operate properly the deck MUST be lowered all the to the...
  8. Replies
    17
    Views
    3,673

    Oil & Fuel Re: OIL DIPSTICK STUCK

    so why was it stuck?
  9. Replies
    1
    Views
    737

    Re: 2320 Sputtering

    I would replace the fuel filter first.
  10. Replies
    21
    Views
    3,167

    Re: Loosing Power on 2320

    Wondered if you have resesolved the issue. Would like to hear the results.
  11. Replies
    21
    Views
    3,167

    Re: Loosing Power on 2320

    We have the same model that is 4 years also so please keep us posted on results. Only problem we had recently was a reduction rpm to around 1500 rpm for a couple minutes and then it was ok until next...
  12. Replies
    46
    Views
    6,357

    Mowing Re: Use Low Gear on hills!!

    I appreciate people on this board pointing out things we need to be aware of and benefit from of which this is one. Merely pointing out whatever the piece of equipment is we must teach ourselves to...
  13. Replies
    46
    Views
    6,357

    Mowing Re: Use Low Gear on hills!!

    There is always personal responsibilities we must accept in anything we do. Can't expect the world to always protect us from ourselves. If you need help with your gear problem, okay, solve it for...
  14. Re: Is the 62D deck a floating or ground contact deck?

    For the spray/wash attachment to work properly it is important that the deck is lowered all the way to level ground with the wheels released from any setting. Does a great job if used regularly,...
  15. Replies
    3
    Views
    1,696

    Mowing Re: 2320 Height adjustment modification..

    If you use the 3-point to raise and lower the deck then you can set the lever for it using the built in stop for the height you want. If you use the same lever as the FEL then you would have to use...
  16. Replies
    25
    Views
    5,245

    Mowing Re: New 3320 Jerks & Lunges

    I think on the 72D deck there is a mower height setting bar you have to set to the desired height (1 1/2 to 5") after attaching the deck located on the left side of tractor.
  17. Replies
    11
    Views
    3,009

    Re: MMM - Mulching?

    We have a 2320 with 62D deck. Works well as long as not cutting more than an inch or so at a time. We have the mulching "Kit" which consists of plastic inserts under the deck. Tried with just...
  18. Replies
    26
    Views
    3,711

    Re: Keep my 2320 or upgrade to 3320 ??

    I would buy the 3320 but keep the 2320 and use each for situations best suited for them. You probably won't be able to sell your 2230 for what it is worth, plus you know its a good tractor.
  19. Replies
    69
    Views
    15,933

    Comparison Re: JD 2305 vs JD 2320

    We are very pleased with the capabilities of our 2320, but with the amount of possible things you will want to do in the future and the amount of land you have I agree you should be looking at the...
  20. Replies
    13
    Views
    8,887

    Re: Gator Blades......opinions please

    We have had mixed results with gators, on our 455 with 48 inch deck I feel they do a great job, on our 2320 with a 62d deck I don't see the same results and like JD mulching blades a little bit...
  21. Replies
    20
    Views
    6,504

    Re: 2320 mower height selection knob

    On ours the highest notch off lock up is set at 3 1/2 the next notch is a little over 3 inches and then about 1/4 increments from there. My lift is controlled by the 3 point hitch lever which also...
  22. Replies
    1
    Views
    1,162

    Hydro Pedal Sticks

    Our 2320 hydro pedal sticks in high range only if pushed all the way down going down a road for 10 min. Does not stick is not pushed all the way. In low range NEVER sticks pushed all the way. Is...
  23. Replies
    14
    Views
    2,320

    Re: Future JD owner need help with mmm question

    4 mph or higher works well, so your 7 or 8 would work well. A lot of steep slopes around here are not that smooth to traverse and safety requires a slower speed. Even then one shift either way...
  24. Replies
    14
    Views
    2,320

    Re: Future JD owner need help with mmm question

    We have a 2320 and high works well on gentle slopes and even steep if you are not trying to maneuver around stuff at 2 mph, high likes to stay 4 mph or more, then the steep slopes are fine. At lower...
  25. Thread: Cab or No Cab

    by Hammsman
    Replies
    15
    Views
    2,212

    Re: Cab or No Cab

    Would liked to have a cab, but have a lot of young (short) trees to mow around. You can't trim small trees enough to mow around and still have them look right. Plus on the 2320 there is no way it...
  26. Replies
    91
    Views
    10,748

    Re: Won't get fooled again

    I too am sometimes hit with sticker shock on what things cost, but find by asking upfront about cost and then checking with other reputable people to perform the same service, and finding all to be...
  27. Replies
    19
    Views
    10,496

    Mowing Re: 2320 mid-mount mower adjustment knob!

    Thanks everyone on this thread, after two years my deck is finally the way it should be: Knob turns without hitting a stop: decks stays up in lock position with no drop (1/8 inch) while using 3 pt...
  28. Replies
    19
    Views
    10,496

    Mowing Re: 2320 mid-mount mower adjustment knob!

    I am confused... Does the knob turn continuously in either direction without hitting a stop or does it turn 360 degrees in both directions and hits a stop at install and/or Lock? I would also like to...
  29. Replies
    46
    Views
    58,241

    Re: How do you disable the seat switch?

    Use to know almost 200 phone numbers before auto dialers, now probably six. Afraid to buy a GPS unit because in time might not remember how to get home. Technology is not always a positive influence...
Results 1 to 29 of 29
© 2018 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.