Search:

Type: Posts; User: Chris Schurmann; Keyword(s):

Results 1 to 27 of 27

Search: Search took 0.00 seconds.

  1. Replies
    9
    Views
    432

    Re: Just bought an 85

    If the only way you can get it to fire is pouring motor oil in it, you have a lack of compression and thats why it won't fire on fuel. Time for a compressiin check. Setting that long you most likely...
  2. Re: Help, I'm thinking Blown head gasket - what are your thoughts ???

    Yes, for sure a rod.. Sorry I am old got the postit note up now. Lol

    Thanks.
  3. Re: Help, I'm thinking Blown head gasket - what are your thoughts ???

    I'm going to get the crack turned 0.030 under hone out the cylinders and replace the bearings and rings, head gasket, oil pump and call it good. Oh also going to get the missing orings for the...
  4. Re: Help, I'm thinking Blown head gasket - what are your thoughts ???

    In a pasted much younger life, I was a auto mechanic, not much def in deisels other that parts cost 1000% more and with deisels it seems very hard to use the ears to hear things like engine knocks....
  5. Re: YanMar 2210 Factory Crack spec's???

    Thank You! Going to go and see about get the crack turned, its a long shot but I have a contact at Bullet racing cams and they can turn it as long as its not cut to deep for 185.00 verses 450.00 for...
  6. YanMar 2210 Factory Crack spec's???

    YanMar 2210 Factory Crack spec's??? Does anyone know what the factory Crack specs are for a 81 2 Cylinder 2210 Tractor. Also if its handy I would also like the spec's on the cam and rods.. Thank You...
  7. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    LOL,

    Thanks Everyone.
  8. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    Thank you great information, I have found a short block and will pick it up the week of the 20th.
  9. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    No muffler , didn't help either as far as being able to use the ears for diagnostic.
  10. Re: Help, I'm thinking Blown head gasket - what are your thoughts ???

    I hope to get her going again, but its going to be a cost out first. Other wise someone might pick her up for salvage or I might just part her out on ebay if need be.
  11. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    You are correct, its blows my mind that it even turn over let alone cracked.
  12. Re: Help, I'm thinking Blown head gasket - what are your thoughts ???

    Well, It's not good. below are two more video's one showing lower end and knocking rod. Video # 1- https://plus.google.com/111135562855269414034/posts/KdxoqnE7YGG

    Cylinder walls, crank damage and...
  13. Updated lowerHelp with Yanmar 2210 maybe a blown head gasket but would like opinions

    Well, It's not good. below are two more video's one showing lower end and knocking rod. Video # 1- https://plus.google.com/111135562855269414034/posts/KdxoqnE7YGG

    Cylinder walls, crank damage and...
  14. Re: Help Yanmar 2210 problems head gasket and values etc just pulled here is the vide

    Will do some reading on this thanks for the link , It actually does not look as if it has hit the piston now that I have cleaned them up. may have formed due to the cylinder not firing every stroke.
  15. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    Actually it is carbon build up that was holding it open I have clean them and it is closing all the way now. I am a bit worried I might find some lower end issues that piston has a bit of play in it...
  16. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    I tend to agree with you, I will make a trip to the machine shop. But based on what I'm seeing the past owners had not a clue as to what they were doing and caused most of the current damage due to...
  17. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    It's on both pistons they left out all the nosel spacers when it was put back together years ago.

    try this link and let me know if it works please ....
  18. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    Update, please give input.

    Okay as of yesterday, we thought we had just a head gasket issue . But after pulling the head it looks to be a lot more going on. note the value and nosel imprint in the...
  19. Help Yanmar 2210 problems head gasket and values etc just pulled here is the video

    Okay as of yesterday, we thought we had just a head gasket issue . But after pulling the head it looks to be a lot more going on. note the value and nosel imprint in the top of the piston, I guy I...
  20. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    No water in fuel bowl. I wish it was that easy.
  21. Re: Help, I'm thinking Blown head gasket - what are your thoughts ???

    I have stopped running it , in the video I had just cleaned / flushed and filled the radiator to see if it would still blown the coolant out and it did but a a lot slower pace than when I first got...
  22. Re: Help, I'm thinking Blown head gasket - what are your thoughts ???

    Thanks for all the input Everyone. the fuel tank was cleaned along with the injectors and New fuel added. Bad Fuel was my first thoughts. It is also over heating and losing coolant so this is also a...
  23. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    Well, off to the races. Will tear it down tomorrow weather permitting. Thanks Again.
  24. Re: Help, I'm thinking Blown head gasket - what are your thoughts ???

    Thank you.
  25. Re: Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    Winston, Thanks for the reply yes it does have a sweet smell to it, its also running warm.

    Thanks
    CS
  26. Help, I'm thinking Blown head gasket - what are your thoughts ???

    Hello Everyone,

    I just bought a YM2210 , it was not running when I bought it. I now have it starting but it is missing and blowing a white puff of smoke when it misses seems to be ever other time...
  27. Help with Yanmar 2210 maybe a blown head gasket but would like opinions

    Hello Everyone,

    I just bought a YM2210 , it was not running when I bought it. I now have it starting but it is missing and blowing a white puff of smoke when it misses seems to be ever other time...
Results 1 to 27 of 27
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.