Search:

Type: Posts; User: corey9212; Keyword(s):

Results 1 to 100 of 740
Page 1 of 8 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: Economy PTO vs. 540/1000rpm and does your tractor have one?

    The 3046R doesn't have an economy PTO feature, the reason the dash has an E setting is cause it's the same dash that the 4R's use and they have that feature.
  2. That's awesome you found a great dealer, I found...

    That's awesome you found a great dealer, I found even though dealers can be part of a large chain and you have a bad experience with another dealer from that chain that every dealer is still...
  3. If it's space that's the issue and the levers...

    If it's space that's the issue and the levers take up less space then why not make shorter levers? That would save room in the cab and under the panel. The third scv is for the mid mower so it can...
  4. Replies
    8
    Views
    1,535

    I recently got a 3046R and think it's a great...

    I recently got a 3046R and think it's a great little tractor with lots of power and potential. Haven't had any problems with the emissions and been quite reliable.
  5. Replies
    13
    Views
    5,330

    Rotary Cutter I had an MX10 pull type and loved it, I found the...

    I had an MX10 pull type and loved it, I found the pto was actually quite light (want to talk about heavy pto try lifting and connecting the pto on my 568 baler, lol) I pulled the MX10 with a 6125R in...
  6. On the bigger equipment I could see it being...

    On the bigger equipment I could see it being benificial but on something this small it feels more of a hinderance than anything



    I have 4 couplers on the front for the loader and snowblower...
  7. It's not the switch to activate the rear remotes...

    It's not the switch to activate the rear remotes it's the fact that you have to use your loader valve to operate your rear remotes, you use your loader joystick for the loader (ok no problem) but...
  8. Opinions about John Deere's decision to do this.

    Hello, I have a 3046R (with the deluxe cab) and am quite surprised at what this little tractor can do. One thing though that baffles me is the rear SCV's and why John Deere decided to go this way and...
  9. I redid my entire driveway with recycled asphalt...

    I redid my entire driveway with recycled asphalt and am glad I did, make sure it's warm when you put it down and well compacted and it will set like cement in a few weeks, when you drive on it it's...
  10. Quick Hitches According to my dealer, to convert to the SSQA...

    According to my dealer, to convert to the SSQA would be a special order and require fabricating so I wonder if that's where I would lose my lift capacity cause there would be a lot more metal and...
  11. Quick Hitches I asked my dealer about the same thing for my...

    I asked my dealer about the same thing for my tractor and he said it will lower the lifting capacity quite a bit cause the parts needed to make it a skid steer quick attack is quite heavy with all...
  12. Replies
    3
    Views
    519

    Thank you, I got to use it once and so far I am...

    Thank you, I got to use it once and so far I am very impressed, I went from a loader mounted blade with trip springs and have had issues with it (loss of traction and springs tripping and ect.) but...
  13. Replies
    3
    Views
    519

    degleman plow blade info and tips?

    Hello I got myself a 9' Degleman plow blade (tractor frame mounted) with high capacity wings for my 6125R I was wandering if anyone has used these blades and if so could give me their...
  14. Replies
    5
    Views
    615

    I have John deeres baler mounted moisture tester...

    I have John deeres baler mounted moisture tester in my round baler, the install was easy but the calibrating takes a little getting used to, I used a hand held moisture tester and set the moisture...
  15. Replies
    19
    Views
    1,184

    It's getting quite rediculous, weather man says 7...

    It's getting quite rediculous, weather man says 7 days of 20-40% rain coming up so I figure the odds are low I will give it a try and then as I get the haybine serviced I feel drops on my head and...
  16. Thread: Error code

    by corey9212
    Replies
    1
    Views
    515

    I haven't had it, but when I checked my...

    I haven't had it, but when I checked my diagnostics manual that code isn't in there, it shows info on the turbocharger compressor outlet sensor but nothing on an inlet sensor so it might be a dealer...
  17. Replies
    29
    Views
    1,919

    You should pop over and ask his theory behind...

    You should pop over and ask his theory behind operating that way vs removing or lowering the loader.
  18. Replies
    29
    Views
    1,919

    That was what I thought but it seems awfully...

    That was what I thought but it seems awfully risky just to get a better view.
  19. Replies
    29
    Views
    1,919

    That's my theory, take the loader off when not in...

    That's my theory, take the loader off when not in use, the ones in the field are pulling equipment so no need for the loader to be on (it is newer equipment so the loader should come off) but the...
  20. Replies
    29
    Views
    1,919

    That's what I thought and it makes sense to me...

    That's what I thought and it makes sense to me for stability and safety.



    I understand raising it to clear obstacles and dropping it back down when clear but these guys are traveling and...
  21. Replies
    6
    Views
    920

    It's very deep and heavy I had to go through some...

    It's very deep and heavy I had to go through some spots of 4' of heavy wet snow to get through the pasture so I imagine that tractor was really working to get through that field, how the guy made it...
  22. Replies
    29
    Views
    1,919

    Loader position

    Hello, I've been seeing this more and more and am trying to figure out why people are doing this and what the advantages and disadvantages are to doing this.

    Putting the loader all the way up in...
  23. Replies
    6
    Views
    920

    That happened not far from where I live, all I...

    That happened not far from where I live, all I can say is thank god I have a lock on my doors that the default JD key can't open and keep my doors locked. It's sad when in the country you have to...
  24. Replies
    27
    Views
    4,085

    That's a pretty good idea and cost effective too....

    That's a pretty good idea and cost effective too.



    I just saw a bunch with front blowers at my local fendt dealer I wonder if they are making a come back?
  25. Replies
    27
    Views
    4,085

    No it's a geared tractor, so how would that...

    No it's a geared tractor, so how would that become an anchor and not a blade attached to the frame not become one? (Or does it as well cause I do see a lot of those on tractors.)
    That could be an...
  26. Replies
    27
    Views
    4,085

    Would it spin the right way (clockwise) or would...

    Would it spin the right way (clockwise) or would it be reversed?



    So they don't attach by PTO then? Just straight to the crankshaft flywheel? That could be an option if so. My tractor has...
  27. Replies
    27
    Views
    4,085

    My rear is 540/540E/1000E because it's multi...

    My rear is 540/540E/1000E because it's multi speed I would have figured the front would be multi speed as well just programmed from the computer like everything else in the tractor.
  28. Replies
    27
    Views
    4,085

    That would be cool to see, I was thinking more to...

    That would be cool to see, I was thinking more to keep compact and maneuverable if it was on the front 3 point it would be closer to the tractor instead of way out in front like the loader would be.
  29. Replies
    27
    Views
    4,085

    Thank you, so the front PTO spins the opposite...

    Thank you, so the front PTO spins the opposite direction I take it? The front 3 point hitch and front PTO are field installed options I am considering.
  30. Replies
    27
    Views
    4,085

    Rear blower on front 3 point hitch?

    Hello, I was contemplating on putting a 3 point hitch on the front of the tractor with a front PTO, my question is if I got a 3 point snow blower could I use it as a front mount snow blower? Could it...
  31. Replies
    11
    Views
    1,228

    Found this pic on the internet, and they didn't...

    Found this pic on the internet, and they didn't even use a baler (apparently it's all made my mother nature herself, guess she's sick of winter too?)
  32. Replies
    11
    Views
    1,228

    I don't think it would destroy a baler, no more...

    I don't think it would destroy a baler, no more than pressure washing it at the end of the season would.
  33. Replies
    11
    Views
    1,228

    Not enough o's and n's in there, lol.

    Not enough o's and n's in there, lol.
  34. Replies
    11
    Views
    1,228

    It's just one of those things that I would never...

    It's just one of those things that I would never try but curious if it would work, cause you never know with some people today that someone might have thought of it and tried it.

    Logically I...
  35. Replies
    11
    Views
    1,228

    Crazy question

    Was talking with a friend and I made the comment that I want this snow to go away so I can go baling again and he said I want to do it so bad that he could see me out there baling the snow, we both...
  36. Replies
    40
    Views
    3,947

    Don't forget those floating tires, it was sweet...

    Don't forget those floating tires, it was sweet driving along the shore of the lake then veering onto the lake (didn't go very far but enough that it was fully floating.) then back on land without...
  37. Replies
    40
    Views
    3,947

    I have digital copies of the owners manual and...

    I have digital copies of the owners manual and shop manual of the 1982-83 200e big red. If you pm me I can email you a copy if you like.
  38. Replies
    29
    Views
    4,447

    My 6125R weighs 12,059 lbs unloaded, I have both...

    My 6125R weighs 12,059 lbs unloaded, I have both rears loaded and I have the loader and it weighs 14,582 lbs.
  39. Replies
    18
    Views
    1,625

    According to my owners manual they are transport...

    According to my owners manual they are transport locks, I have an electronic version of them. This is what my manual says:

    Activate transport lock buttons when driving on roads and whenever the...
  40. Replies
    14
    Views
    1,215

    No problem Matt, it's been really cold here too...

    No problem Matt, it's been really cold here too -45 I was shocked the tractor even started that day. Let us know how it worked.
  41. Replies
    14
    Views
    1,215

    My tractor wasn't getting up to temperature...

    My tractor wasn't getting up to temperature either, it would get to 60*C (dealer said it wasn't even at the temperature to open up the thermostat, 80*C.) I made a cover out if cardboard that covers...
  42. Replies
    181
    Views
    13,660

    Yep and with a large hill to the south it's like...

    Yep and with a large hill to the south it's like living in a dome and it all dumps just inside the dome, lol. There are days where there is clouds all around me and pouring rain or snow but none...
  43. Replies
    181
    Views
    13,660

    You guys can have my snow, there is so much here...

    You guys can have my snow, there is so much here that I have 5 hills 12' high and 50' long. Had to clear out a part of the pasture and start the task of moving my snow mountains out to the new spot.....
  44. Replies
    13
    Views
    1,969

    I'm not sure if you are still looking for advice...

    I'm not sure if you are still looking for advice but like was mentioned earlier you could convert your hitch to cat 2 for the mower and use bushings on your cat 1 implements to use them on your new...
  45. Replies
    79
    Views
    11,609

    I really can't complain then with my results,...

    I really can't complain then with my results, going from a 26hp to a 125hp tractor I just about fainted at how much fuel I was using, so it looks like I'm doing a little better than par with other...
  46. Replies
    79
    Views
    11,609

    Cleaner air and bigger repair and maintenance...

    Cleaner air and bigger repair and maintenance bills and more things that can go wrong.
  47. Replies
    79
    Views
    11,609

    I'm still deciding whether or not I like the tier...

    I'm still deciding whether or not I like the tier 4 engine yet. From my experience I've already had to replace the blow by filter and am averaging 4L/hr. ( 1 GPH) using the tractor with low to mid...
  48. Replies
    4
    Views
    1,739

    Could be air in the lines? If they are like my...

    Could be air in the lines? If they are like my 6125R then the brakes are either hydraulic or air (I would presume hydraulic cause air is a special ordered feature.) try pumping it a few times and see...
  49. Here's a youtube video of a guy starting and...

    Here's a youtube video of a guy starting and going through the shifting of a 4240, it can at least get you started
    http://www.youtube.com/watch?v=PQsFTAHGCOY
  50. I found this PDF to be good information about...

    I found this PDF to be good information about tractors in general and has taught me lots about farm operation and safety (about 1/2-3/4 of the way through it starts talking about tractors and...
  51. Replies
    17
    Views
    4,506

    That's interesting, I never knew there was...

    That's interesting, I never knew there was different category drive lines. Is there a standard for them (certain cat for certain HP? Ect.)
  52. Replies
    7
    Views
    5,702

    It's got 138 hours on it, it's barely broken in....

    It's got 138 hours on it, it's barely broken in.


    Yes, apparently it's a known issue with John Deere and right now all they say is replace the filter, the mechanic will give them advice on how to...
  53. Replies
    7
    Views
    5,702

    The mechanic came and the filter was clogged with...

    The mechanic came and the filter was clogged with water and oil, he said it looks like a design flaw from John Deere and put in a request for them to review it. The line going into the filter is...
  54. Replies
    7
    Views
    5,702

    ECU Error code

    Hello, I started my tractor up today and was letting it warm up when I got this error code on the display:
    ECU 101.00
    Engine System
    Crankcase pressure high. Engine power limited. Check blow-by...
  55. Replies
    16
    Views
    1,167

    True, I wouldn't know the difference besides the...

    True, I wouldn't know the difference besides the model numbers, hopefully the newbie buyer will see this amazing forum first and ask questions and look at tractordata.com.
  56. Replies
    8
    Views
    763

    Mine does but like buickanddeere said it's not an...

    Mine does but like buickanddeere said it's not an issue.
  57. Replies
    16
    Views
    1,167

    lol, or a draw system, whoever picks the best...

    lol, or a draw system, whoever picks the best number gets a bonus on their cheques for how many tractors of that model was sold.
  58. Replies
    16
    Views
    1,167

    That would be the old numbering system my...

    That would be the old numbering system my explanation was if the numbers were on a tractor of the new numbering system.
  59. Replies
    16
    Views
    1,167

    That's why I said if it was by today's standards....

    That's why I said if it was by today's standards. Back then who knows what they were thinking to make the model numbers.
  60. Replies
    16
    Views
    1,167

    well if it was by today's standards the 2030...

    well if it was by today's standards the 2030 would be in the category 2 size (the bigger the category the bigger the tractor is physically) and have 30 engine HP, the other two would be in the...
  61. Replies
    73
    Views
    15,272

    I gotta figure out how to move huge quantities of...

    I gotta figure out how to move huge quantities of snow, with the drifts I have 3' deep of snow to push and the plow just seems to push it aside instead of straight ahead (can't have any rows on some...
  62. Replies
    73
    Views
    15,272

    It does get a lot easier, this is my first year...

    It does get a lot easier, this is my first year using a plow and at first it gave me a lot of concerns with digging in but now it's been a massive time saver over the bucket. The key really is to...
  63. Replies
    193
    Views
    30,108

    I asked the mechanic when he was here and he said...

    I asked the mechanic when he was here and he said it was working. I still wonder some times though cause it feels like it should start a lot easier than it is (especially with a 30 second glow plug...
  64. Replies
    193
    Views
    30,108

    My block heater is plugged in a thermostat...

    My block heater is plugged in a thermostat controlled outlet (turns on when it hits 0) so for the last month it has been on steady and it was still a struggle to start, that's why I made the call.
  65. Replies
    193
    Views
    30,108

    I had issues starting my tractor not long ago and...

    I had issues starting my tractor not long ago and gave my service department a call and he said to put the throttle 1/4 open, heat the glow plugs for 30 seconds and crank it. When started establish...
  66. The first round baler I used was an international...

    The first round baler I used was an international 3450. It was a soft core baler and it had a control box instead of a monitor, the box hooked up to the battery terminals for power and it would let...
  67. Replies
    10
    Views
    1,054

    What is herringbone? I've never heard that term...

    What is herringbone? I've never heard that term before.
  68. The round baler should come with everything you...

    The round baler should come with everything you need except for the twine or net wrap. The monitor should be included with it.
  69. Replies
    10
    Views
    1,054

    When you bucket it do you completely move it or...

    When you bucket it do you completely move it or just push it over? I move it to my designated snow pile that's 100 yards away but find that when I move it, it makes a mess of the drive I'm not sure...
  70. Replies
    10
    Views
    1,054

    Do you bucket all of it or just a layer off the...

    Do you bucket all of it or just a layer off the top?
  71. Replies
    4
    Views
    863

    I put my fan at 1/4-1/2 speed, activate the air...

    I put my fan at 1/4-1/2 speed, activate the air conditioning, set heat to cool and put the vents to the defrost mode. Once defrosted I turn the heat to desired temperature. Fogging up is cause of...
  72. Replies
    10
    Views
    1,054

    Dealing with high rows

    Hello, I've been reading about when using a blade the edges get high and can cause drifts, I am now experiencing the high edges causing the drifts and am wandering how you guys deal with it? Do you...
  73. Replies
    0
    Views
    369

    Bale buster plugs

    Hello, I'm trying to operate my bale buster and the manual is very vague on how to operate it so I'm hoping someone here has experience operating one. First off do I operate the conveyor to spin the...
  74. A few things I would suggest, if your soil is...

    A few things I would suggest, if your soil is sandy I would get 4wd, I would get the rears loaded or at least weight on the front cause if it's a round baler you will feel it wrapping the bale (my...
  75. Replies
    16
    Views
    2,605

    I have used both spring seats and air ride seat...

    I have used both spring seats and air ride seat and will say there is a big difference between the two and if you can get an air ride seat then definitely go for it.
  76. Replies
    16
    Views
    1,236

    Here is a couple pics of the cam, it is in a...

    Here is a couple pics of the cam, it is in a inconspicuous place. Here is a couple pics of the bale torn apart in the shredding chamber.
  77. Replies
    16
    Views
    1,236

    Yeah, it's definitely a different concept for me,...

    Yeah, it's definitely a different concept for me, when I activate the PTO shredder the tractor definitely feels it. The first run didn't go as good as I had hoped. I'm not sure if it's cause I used a...
  78. Replies
    16
    Views
    1,236

    Ok, after several conversations with the...

    Ok, after several conversations with the manufacturer and referring to this topic I figured out how to use it an I think it's ingenious. You guys were right about the lines being mixed up the one...
  79. Replies
    16
    Views
    1,236

    I tried swapping the hoses and what ended up...

    I tried swapping the hoses and what ended up happening is the motor ran on one scv and the bale loader ran off of the other there was absolutely no movement at all on the outriggers


    I'm not...
  80. Replies
    16
    Views
    1,236

    Thank you for the fast reply this is one of those...

    Thank you for the fast reply this is one of those things that should be so simple to me but cause I can't figure it out it's constantly running through my mind right now, sorry I'm really new to this...
  81. Replies
    16
    Views
    1,236

    Help with hydraulics on a bale buster

    Hello, I just bought a bale buster for cheap but the previous owner hadn't used it for a few years. The only thing he said was that he marked the lines in pairs (requires 2 sets of scv outlets.) I...
  82. Replies
    9
    Views
    1,627

    Snow Equipment Owning/Operating Hopefully it won't be long till the ground is...

    Hopefully it won't be long till the ground is frozen.


    I didn't know plow trucks end up digging in as well. I tried it out if float but the ground is so unlevel in places that either I dig in...
  83. I have to agree, I have the same blade (came with...

    I have to agree, I have the same blade (came with the hydraulic cylinders) it is a very good blade once you learn all the tricks to plowing with a FEL blade. I'm still learning but so far am...
  84. Replies
    9
    Views
    1,627

    Snow Equipment Owning/Operating So keep it out if float then and more practice....

    So keep it out if float then and more practice. Nice set up by the way, what is the round thing behind your blade and what is it for?



    I'm hoping so. At this rate it seems like it's taking...
  85. Replies
    9
    Views
    1,627

    Snow Equipment Owning/Operating FEL plow problems

    I was out trying out my plow today and had a few problems that I'm not sure if it's me or the equipment first I set the plow up according to the manual and I found the trip springs would trip over...
  86. Replies
    11
    Views
    1,236

    I'm glad I'm not the only one with that kind of...

    I'm glad I'm not the only one with that kind of dealer problem but I'm not glad that dealers take people like that and then say they did nothing wrong and that it's the users fault, my story is...
  87. Replies
    11
    Views
    1,236

    Yeah it was definitely a strike against my trust...

    Yeah it was definitely a strike against my trust for dealers but the whole deal with the 5115M was just a big mess, all I can say is he should have definitely sold me cat 2 attachments instead of cat...
  88. Replies
    11
    Views
    1,236

    Yes I am aware of that, I have had to be very...

    Yes I am aware of that, I have had to be very careful with them and going slow so I didn't wreck them. Most of them were sold to me by my dealer at the time when I bought a 5115M (cat 2 tractor) I...
  89. Replies
    11
    Views
    1,236

    Technically all my attachments are cat 1 but most...

    Technically all my attachments are cat 1 but most had their lift pins converted to cat 2.



    Sweet, it wouldn't be hard for me to find out what wires go to the cab switches then tap into them. I...
  90. Replies
    11
    Views
    1,236

    I have thought about that but the problem is all...

    I have thought about that but the problem is all my attachments vary between cat 1 and cat 2 and my 3pt hitch is a cat 3, got lots of bushings laying around, lol.
  91. Replies
    11
    Views
    1,236

    Question about e-scv

    Hello, I have a hydraulic top link for my tractor and when hooking up I find I am constantly in and out of the cab to adjust the length to get it hooked up. I was wandering cause it's an e-SCV is...
  92. Replies
    30
    Views
    3,290

    I always use it when I'm running 540 attachments....

    I always use it when I'm running 540 attachments. It's so much quieter and saves a lot of fuel. I have yet to find a time that 540e wasn't enough to run everything.
  93. Replies
    2
    Views
    400

    Well it would be either aircraft cable or a chain...

    Well it would be either aircraft cable or a chain and my 6125R tractor.
  94. Replies
    2
    Views
    400

    Caragana tree removal advice.

    Hello I have two long rows of caragana trees that have been nothing but a pain and are massively overgrown and out of control and want to get rid of them. I have been told that if I wrap a wire...
  95. Replies
    16
    Views
    4,810

    Snow Equipment Owning/Operating Thank you, the pics in that brochure should give...

    Thank you, the pics in that brochure should give me what I need to prove to my dealer that something is wrong with the blade.
  96. Thread: AKfish ?

    by corey9212
    Replies
    6
    Views
    775

    Hope he is ok.

    Hope he is ok.
  97. Replies
    16
    Views
    4,810

    Snow Equipment Owning/Operating The dealer still insists it's how it's supposed...

    The dealer still insists it's how it's supposed to be his quote was "It's to prevent it from digging too deep" but what about if I don't want it to dig at all? Plus this blade is not meant for...
  98. Replies
    16
    Views
    4,810

    Snow Equipment Owning/Operating This one is reversible too so I imagine the other...

    This one is reversible too so I imagine the other side will look the same as this side. I thought the heads sticking out were odd as well. I've thought about flipping it upside down (short edge on...
  99. Replies
    16
    Views
    4,810

    Snow Equipment Owning/Operating That's what I thought too (pins too short or...

    That's what I thought too (pins too short or cutting edge too long or mislocated.) I will see what the dealer says about it.
  100. Replies
    16
    Views
    4,810

    Snow Equipment Owning/Operating Here is some pics. As you can see in the last 4...

    Here is some pics. As you can see in the last 4 pics the blade is at the height I would like it to be to start with but the frame would be scrapping the ground.
Results 1 to 100 of 740
Page 1 of 8 1 2 3 4
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.