Search:

Type: Posts; User: art; Keyword(s):

Results 1 to 100 of 5000
Page 1 of 50 1 2 3 4

Search: Search took 0.48 seconds.

  1. Re: Little help: International 234 Hydro. Where to start?

    Often bush hogging the grilles fill up, they overheat and destroy the engine,
  2. Replies
    1
    Views
    457

    Re: IH 3088 loss of hydraulics

    The center hub on the pressure plate may have failed or the diverter valve is stuck.
  3. Replies
    5
    Views
    460

    Re: Male, femal coupler for 3rd function?

    Most manufacturers go with m/f, f/m. For the hydraulics on compacts they stick with ag style couplers for cost.
  4. Replies
    3
    Views
    415

    Re: 5030hst pto problem

    Is the valve under the seat open? Check the wires going in and out of your switch on the pto.
  5. Replies
    3
    Views
    433

    Re: Quick hitch front loader problem, advice?

    There are variations from every manufacturer of the quick attach plates. For part of the problem I would wonder if your quick attach might have gotten tweaked. Yes some are just that way, do be...
  6. Replies
    6
    Views
    369

    Re: Bush Hog 268 a good cutter?

    The 268 I believe was replaced by the 278 which is heavier then the current replacement the 2008. I like brand names and even then at times they disappoint me with parts when 40 years old. If in...
  7. Buying Advice Re: Top and Tilt interferes with backhoe subframe on new L4701 and MX5800

    Kubota uses side connections on the cylinders. Fit Rite uses cylinders that connect on the outside and will work with the hoe's subframe.
  8. Replies
    6
    Views
    1,559

    Tire Selection Re: Swap Tires and rims BX2200

    At your Kubota dealer for about 350 you could have brand new ones right from the factory tires and rims!
  9. Replies
    5
    Views
    1,053

    Re: Glenmac T8 harley rake pricing?

    You are light on the horsepower as 50 is considered the minimum.
  10. Replies
    6
    Views
    1,168

    Price Check Re: Kubota 2003 ZD21 Zero Turn(s)

    Awesome mowers we have them in our area with many more thousands of hours and still going strong. On the thoughts of 1,000 for the parts machine I'd say it might be a good investment for tinkering...
  11. Replies
    6
    Views
    2,223

    Re: Kubota 5 year warranty

    Kubota didn't get it's reputation by needing a warranty.
  12. Thread: Ferris 3 wheel

    by art
    Replies
    1
    Views
    450

    Re: Ferris 3 wheel

    For over 9 that included sales tax on the Kawasaki model. The price is in line for a 200 hour machine.
  13. Replies
    58
    Views
    5,694

    Re: Clueless about tractors

    For building a house and later property work a Kubota BX 25D is like a swiss army knife for a home owner.
  14. Re: Is the 2501 hiding more power than advertised to avoid tier 4 emissions?

    Don't really know what he has for a dyno, I know our 400 PTO horsepower dyno doesn't read them right that low. Most testing equipment is most accurate in the middle of the gauge so I'd doubt even...
  15. Re: Compact tractor 1540 tipsy... is this the norm for small tractors

    The problem you are having is what you are used to! The tools you work with all day are for one purpose and that is digging while the tractor you have is for much more. There are ways to make the...
  16. Replies
    21
    Views
    3,222

    Tiller Re: forward or reverse tine tiller??

    That compacted layer is as far your plants roots can get in one season. You might try a sub-soiler to break it.
  17. Replies
    16
    Views
    2,172

    Oil & Fuel Re: Add or not add oil additive to Kubota

    If you were running a generic oil I could see the thoughts of an additive. To run Kubota oil you do not need to add anything.. On the fuel issue we here in the north have found power service to be...
  18. Replies
    5
    Views
    793

    Re: L3830 Sticking Hydro Pedal

    It is a very simple system for both and sometimes it just takes patience for the penetrating oil to get in or the persistence to keep working it until the fluid gets to where the problem is.
  19. Re: who makes rural king's 15w40 oil? it's way cheaper than even walmart...

    Most oils are good, there are some that to us in the repair business that we do have better results with for long life and better performance do to the additive packages that go beyond the base...
  20. Thread: Tires for Super A

    by art
    Replies
    11
    Views
    2,792

    Re: Tires for Super A

    Old tractor sizes were done using the rim width vs today they are different using as BobG suggests! I would replace both as the makes and models keep changing and in order to keep it looking right...
  21. Re: How many nozzles can my home made boom accommodate?

    You are correct with 1/2 or 5/8 hose with a piston type pump. To do more you would need a centrifical.
  22. Replies
    108
    Views
    27,824

    Re: Any one heard of the new M62 coming out?

    Through the years with one introduction or another it was explained that petal also dis-engages the transmission which would also reduce the starter load. This is a major advantage with cold...
  23. Replies
    5
    Views
    1,108

    Re: International Harvester 656 with FEL

    For that kind of fuel consumption you are using the tractor at it's max. That might be pulling a 10' bush hog or a 12' disc. The best you might get is a couple to three gallons an hour.
  24. Replies
    11
    Views
    1,615

    Re: Kubota backhoe or woods??

    Things that might make a difference and they might not! 1, the controls on the Kubota's are more consistant and easier to judge as to where you are going and when to stop.
    2, over hang, If you...
  25. Thread: Maintenance myths

    by art
    Replies
    63
    Views
    8,762

    Re: Maintenance myths

    The clothes washer that has to be used more extensively because of the extra grease getting on your waxing rags!
  26. Thread: Disc Advice

    by art
    Replies
    5
    Views
    843

    Re: Disc Advice

    many people are disappointed with disc harrows when comparing to their neighbors disc on the farm. Framers use disc's that weigh 400 pounds per foot so there is a big difference in the cutting...
  27. Replies
    3
    Views
    783

    Re: JD 1070 clutch noise

    For the age of the tractor you might have the clutch shaft getting dry or parts in the transmission. To only have when cold, metal is a different size and it might not be a real problem. the...
  28. Replies
    6
    Views
    1,084

    Re: KUBOTA M7060 Jerking

    The drive train is a two year coverage. Get it fixed and they very well will be splitting it! It isn't a big deal.
  29. Replies
    47
    Views
    15,499

    Re: New tractor - any tier 4 issues (DEF, etc)?

    You are correct that with the tier 4 it did help performance! Tier 3 most manufacturers found the cheapest thing to do was retard the timing and good engine people know that costs performance and...
  30. Replies
    21
    Views
    2,588

    Re: Dump Trailer with b3200?

    We have rebuilt many three point hitches over the years from when things went wrong! I'm glad you have had success with what you have been doing but normally what will happen is you will take out...
  31. Replies
    42
    Views
    7,586

    Re: B26 tlb hydraulic issues

    Being a dealer I will they to bring across a point. I have listened to farmers who have to run a tractor or two every day come in after a cold day and say the tractor was fine but when I started it...
  32. Thread: NH 654?

    by art
    Replies
    3
    Views
    936

    Re: NH 654?

    Any idea how much hay it has done? Your probably just going to use it in dry hay? Bearings and belts! Also be sure moniter works.
  33. Replies
    21
    Views
    2,588

    Re: Dump Trailer with b3200?

    That would be fine for me! Low range will spin the tires and still leave you safe for acceleration but if you are baking going down a hill I hope you start out in 4 wheel drive!
  34. Re: Just bought a used BX2360, have a few wiring and heat questions

    Normally before we go at taking the front end apart we switch to gear oil in the front axle. Often we might find as little as a piece or two of grass causing a seep from the axle which for what we...
  35. Replies
    9
    Views
    1,312

    Re: bushhog vs finishing mower vs Belly mower

    The belly mower and a multi-blade three point hitch mower are both finish mowers. The differences of the mowers overall design is small but they do add up to the cut quality. Many designs of finish...
  36. Replies
    13
    Views
    2,395

    Re: John Deere X758 vs Kubota GR2120

    With selling four brands plus of zero turns I would say that your deck is not set up right. They have been the cleanest cut as well as least scalping of all we sell.
  37. Thread: Kubota ZD331

    by art
    Replies
    2
    Views
    385

    Re: Kubota ZD331

    Could possibly be seat switch or fuel depending on the fuel lines and pick-ups in the tank and fuel level.
  38. Re: I'm in the market for a new chainsaw. 24 inch bar.

    Been a saw dealer for over 30 years, still selling Stihl although we were a husky dealer for 20 years. It is not our living do to our other commitments in larger machines but it is a machine every...
  39. Replies
    13
    Views
    2,221

    Re: Can you trade-in tractors that are financed?

    We take trades in everyday that are financed and take care of the pay-offs on the loans of the trade-in. To not disclose a loan on a trade or to sell a piece that has a loan on it is illegal with...
  40. Replies
    29
    Views
    9,717

    Re: BX2230 weight - Why's it so light?

    The BX weight is right on with the majority of the sub-compacts in the industry although there are a few that have more recently been introduced that are heavier. The weight is something that is...
  41. Replies
    25
    Views
    3,057

    Re: Kubota L3540 rear snowblower question?

    There are differences in snow blowers! Make sure the augers don't use sealed bearings, check the distance of the paddle to the rim sheet of the blower and be sure it is a four paddle blower. To...
  42. Replies
    20
    Views
    2,215

    Price Check Re: Good buy? Ford 1700 4wd for $3000

    The tires if you owned the tractor and were using it probably wouldn't get changed till a flat, the fronts look new and at 1900 hours are a little premature but it might have been a dry rot issue. ...
  43. Replies
    100
    Views
    14,698

    Re: How did Kubota get such a large market share ?

    They build a premium tractor in the ag size at a utility tractor price for farmers so for many smaller farms they can have a 16 speed power shift at 90 pto horsepower.
  44. Replies
    100
    Views
    14,698

    Re: How did Kubota get such a large market share ?

    Not to upset the apple cart but, they were the first to build a compact chassis commercial TLB and today still offer it in more sizes then anyone. They were the first to add a factory cab with heat...
  45. Thread: BX Snowblowers

    by art
    Replies
    3
    Views
    1,079

    Re: BX Snowblowers

    Depending on model BX, 2750D
  46. Re: Hydraulic pump whines and chatters when it is very cold on Ford 3400 / 730 loader

    I didn't know that tractor had iso46 oil used in it!
  47. Replies
    14
    Views
    2,939

    Re: Kubota front axle, hydraulic fluid or gear oil?

    The hydraulic fluid is thinner and might be a plus in your colder temperatures. When and if the hubs start leaking then I tell people to use the gear oil till they have to be resealed.
  48. Replies
    2
    Views
    1,239

    Re: new fronts kubota L3540

    Tires are not cheap! You might try your dealer and get a set from Kubota already mounted for nearly the same money! They start at about 215 with rims!
  49. Replies
    22
    Views
    3,808

    Re: Does anyone have/make front fenders for M7040?

    They are currently available for the 7060 but again at nearly 1,000 which is about normal compared to other brands. We did sell several sets of fenders only that people have mounted to the loader...
  50. Replies
    43
    Views
    3,888

    Buying Advice Re: undecided about an 8n or international

    There is really only one good choice and that is the 424 but do not hurt the grille as those parts are used at best.
  51. Replies
    6
    Views
    1,009

    Re: adding a montana loader to a kubota b9200hst

    I don't see a problem!
  52. Re: TC33DA hydro oil change, RED Fluid drained, this ok?

    That is Hytran Ultra! new holland and Case are one of the same for many things including the different labels! The oil you drained was a better oil then you rinsed with.
  53. Re: TC33DA hydro oil change, RED Fluid drained, this ok?

    Being a CaseIH chassis the red oil you have is the Case Hytran which is a blend coming from IH that has had some improvements since the original formula and is now called Ultra Hytran. The Hytran is...
  54. Replies
    3
    Views
    988

    Tire Selection Re: Ford 3000 rear tires

    The difference might will also depend on your rims. They normally are two inches less then the tire size! 11 would need 8 or 9 inch wide rims. 14 should have about a 12 inch wide rim. What will...
  55. Replies
    3
    Views
    369

    Re: Land Pride RB3796 vs. RBT3596

    The 35 is a fully optioned back blade for all adjustments if not hydraulic they are run by turn buckles. There is about 100 lbs difference in the weight which is a plus not only in the construction...
  56. Replies
    19
    Views
    6,376

    Re: Ferris is2100z or an is700z?

    Eric you made the right choice! We are the oldest dealer for Ferris mowers as well as the largest dealer in NY. We did help them get started over 25 years ago so we have a little time together...
  57. Thread: CK2510 vs B2650

    by art
    Replies
    32
    Views
    4,859

    Re: CK2510 vs B2650

    Many people talk of built in weight which can be a disadvantage at times. Excavating work demands a good(well balanced) heavier weight then normal yard chores. we have seen many people go to big on...
  58. Replies
    3
    Views
    324

    Re: Gehl 4500 Hydraulic Fluid

    When that unit was bought they were not to specific as they are today. I will say that the more you pay normally the better quality oil you will get but they were a general hydraulic fluid.
  59. Replies
    7
    Views
    785

    Re: Kubota Loader Pin Stuck

    You are jst going to have to play with it trying to bring it back to where you can slide the pin out as easily as you put it in!
  60. Thread: CK2510 vs B2650

    by art
    Replies
    32
    Views
    4,859

    Re: CK2510 vs B2650

    I'd be desperate before I'd by a tractor for digging and grading without three range! With the Quick attach and front remotes it makes it easy to see when operating a post hole auger off the loader!
  61. Replies
    19
    Views
    2,211

    Re: How much HP do I need?

    We do very little work on the hydro's compared to the gear drives. I don't mean just clutches as I always cringe while hearing a lb of gears being ground off from people who don't know how to drive...
  62. Replies
    12
    Views
    928

    Re: Kubota L3400 --Water in Hydraulics

    Because it is a gear drive the oil quality is important and one we use that absorbs the most amount of moisture is the Case Hytran oil. I would flush with any cheap oil! Then change to something...
  63. Replies
    23
    Views
    4,054

    Re: About to purchase a 2015 Kubota B2650HSDC

    I'd be looking more in favor of the R-4 tires for what you have described as your chores.
  64. Replies
    8
    Views
    1,613

    Buying Advice Re: Kubota B2601 versus B2650

    The 2650 is awesome!
  65. Replies
    9
    Views
    594

    Re: M 8540 4wd question

    you definitely have axle wrap caused from the air pressure of the tires. They are not spinning at the right speeds which can be cured by adjusting the air pressure.
  66. Replies
    11
    Views
    2,263

    Re: Plowing on asphalt question

    I don't run skid shoes on a paved driveway.
  67. Thread: M95S fuel usage

    by art
    Replies
    1
    Views
    300

    Re: M95S fuel usage

    Depends on what you are mowing and the ground speed. figure about 3 max.
  68. Replies
    14
    Views
    1,203

    Backhoe Re: Kubota 4560 backhoe boom will not rise

    Sounds like you need to pull the valve apart!
  69. Replies
    2
    Views
    347

    Re: Farmall Cub Radiator Question

    Often the right level is about 1 inch below the neck!
  70. Replies
    44
    Views
    4,680

    Oil & Fuel Re: Kubota B21 Foaming Transmission Fluid.

    First thing I'd do is be sure that it has the right fluid in it.
  71. Replies
    16
    Views
    4,235

    Re: Farmall M Full Track Conversion

    We do a lot of grooming trails for winter use and for use of the early two track machines we used mogul masters design and added cylinders to the hitch to turn the units on hills. Early model...
  72. Thread: RTV900 Hesitates

    by art
    Replies
    1
    Views
    536

    Re: RTV900 Hesitates

    Linkage adjustment.
  73. Replies
    4
    Views
    644

    Oil & Fuel Re: L48 Hydraulic Fluid

    Being a Case-IH dealer going back to the old design style hydro's used by IH we have worked with many. The Ultra hytran or the one mentioned that is marketed through New Holland I have always liked....
  74. Replies
    67
    Views
    6,564

    Re: Kubota M9960 Rides Rough Please Help

    They do make tractors smaller then the 135! They also have the full power shift the same as the 135. I wonder if your seat is working right? Did you get the air ride seat?
  75. Replies
    2
    Views
    534

    Re: BX2750 Snowblower on BX25D

    The early model snowblowers were different then what is used on the new models. The biggest difference is the hydraulic valve mounting used on the early 2200/2230 units. Later units had the valve...
  76. Replies
    3
    Views
    465

    Re: L3400, BH75 Trouble

    For all the brands we sell, they are normally neglected on lubrication! That doesn't mean you might have an issue!!!!
  77. Thread: Load tires or not?

    by art
    Replies
    10
    Views
    1,065

    Re: Load tires or not?

    The loaded tires are nearly the cheapest rear ballast you can buy. To use the loader carrying heavy loads it might be an advantage. The lighter the tractor the longer the drive train will last. ...
  78. Replies
    67
    Views
    6,564

    Re: Kubota M9960 Rides Rough Please Help

    I don't think you will need to add air!
  79. Replies
    67
    Views
    6,564

    Re: Kubota M9960 Rides Rough Please Help

    Yep, for sure it would be part of the issue!!! Straight air has been proven over and over to give the best ride! Only inflate tires to give a flat foot print across the ribs to the end.
  80. Buying Advice Re: I am now hesitating between the L3901 with BH77 or MX5200 with BH92

    The MX would be a better choice for you as well as your property unless you are retired and have time to spend. I feel you could get the work done with the smaller unit if you are good with...
  81. Replies
    6
    Views
    799

    Mowing Re: Soot on new L3901 with a Landpride 72" mower

    Try operating at a higher engine speed.
  82. Replies
    14
    Views
    2,075

    Re: Who can afford a new Kubota anymore? :D

    It seems strange for someone to think that a Kubota is expensive, I wonder what they compared it to! We sell them all day long and they run thousands of hours and for price, we are in line with the...
  83. Replies
    4
    Views
    716

    Re: JD 1209 haybine advice

    One of the major causes of the wobble boxes loosing is a bent cutter bar. This will work the box excessively trying to slide it back and forth. Make sure it is straight and chances are you should...
  84. Thread: 706

    by art
    Replies
    2
    Views
    518

    Re: 706

    Steering wheel puller.
  85. Price Check Re: 1980 IH 1086 with bad TA for 5500.00 obo... good price?

    the ride was never rough when the tire pressures are right! I'd figure the cost of the TA with a clutch job. It would be more then the other estimate.
  86. Replies
    1
    Views
    245

    Re: Farmall 560 Rear Remote Question

    I've never had to do what you are asking but you could put valves on a set of lines.
  87. Re: B 6200 blowing smoke and dripping oil from pipe breather

    Sounds like he already lost his power. Blow by past the rings.
  88. Replies
    2
    Views
    252

    Re: RTV 900 tranny slips

    Need more info, what ever it does in one range it would do in all, two or four wheel drive.
  89. Replies
    13
    Views
    2,463

    Comparison Re: Mini-Excavator Kubota/Takeuchi?

    I've had people with multiple excavators as well as dozers tell me they don't need the 6 way blade on the 121 Kubota because of the dozers. After they got a 121 you can't sell them anything less! ...
  90. Replies
    20
    Views
    2,252

    Re: How to break in a new Kubota MX5200

    I wonder if the loud growling noise might be from straining the hydro at to low of an rpm. You did not say if it was a gear or hydro so I'm only assuming. At 5 hours I'd be using it the way I'd run...
  91. Replies
    54
    Views
    4,025

    Re: Why are lawn tractors so slow?

    We sell four brands of zero turns and one thing that I have found out, many don't cut well once they are past 5 mph!!! They do talk of 10 mph speed but at that they maybe cut 50% of the grass and...
  92. Replies
    64
    Views
    7,763

    Re: All Time Baling Record?

    I like the line first liar! I'll go with 1,000 bales as I have seen double with kickers and all hay sacked in the barn, although I never keep track without them. 10,000? That would be a several...
  93. Replies
    27
    Views
    15,798

    Re: largest Kubota Dealership in the nation

    I would think that if you owned a business that you would not turn your back on any potential customer. I do believe you would also put your time into keeping a current customer satisfied over the...
  94. Replies
    30
    Views
    3,885

    Re: JD 5100E vs Case 95C vs Kubota 9960

    I would look at the Kubota MX 100 for a deluxe tractor with the extra weight that you seem to want. We normally look to go to 130lbs per horsepower for optimum performance with tillage. Mixed usage...
  95. Replies
    7
    Views
    829

    Re: i1046 mulching poorly. what am I doing wrong?

    I'd make sure the front of the deck is lower then the rear by about a 1/4" and otherwise you are cutting quite a bit more then 1/3rd the height. I know I'm on a 3/4 day rotation for mowing and by...
  96. Replies
    25
    Views
    7,785

    Re: New Kubota F3990 - anyone buy one yet?

    We have several out and have found that short burst operating or low RPM operation is the problem. To run at or above 1/2 throttle even during winter operation of broom and blowers did not bother...
  97. Replies
    10
    Views
    2,150

    Re: JD 2025R or Kubota 2620?

    I like three range hydro's!
  98. Replies
    23
    Views
    3,596

    Re: Why not zero turns for hills?

    We sell four brands of Zero turns at this time. On steep slope it is just amazing where the Cadet will go with a steering wheel! It has gone where others can't, we have even gone to more aggressive...
  99. Thread: Krone TA 2/190

    by art
    Replies
    2
    Views
    324

    Re: Krone TA 2/190

    Was unable to find the model number you have in the parts look-up. Might be why you haven't had any luck. Any chance it could be a different model machine?
  100. Replies
    3
    Views
    398

    Re: L3800 HST starting issue...

    That petal also has a a center switch on it that will not allow it to start if the petal is not in neutral area.
Results 1 to 100 of 5000
Page 1 of 50 1 2 3 4
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.