Ebay may be your best bet price wise.
Type: Posts; User: JordanFTW; Keyword(s):
Ebay may be your best bet price wise.
That machine is worth more than 14k! You just have to find a buyer, which can be the hard part. You may be best parting out the package.
Nice! What did she ran ya?
Nice! What did she ran ya?
I know this is older, but this is something I would be interested in for sure, a plow mount that is...
Not the best design, but was probably 1200-1500 new.
I saw a pretty sweet stand at an upcoming auction, I plan to bid on this setup.
I have seem those all over the place, have you tried searching?
This is not a classifieds forum. Try posting here: Wanted Ads
Also, you may be hard pressed to find the hoe you are looking for in a reasonable price range. Those hoe's you mentioned fetch a...
I drilled and tapped mine, never looked back.
42" John Deere Pallet Fork Attachment
I run these (in 48") and highly recommend them for the price! 529 to a business doorstep.
Glad to see you were able to repair this with little fuss.
Your dealer actually replaced it??? It's pretty common knowledge that this part gets cleaned and only replaced when damaged.
This has been covered allot, might I recommend a site search ;)
I think you need a cab!
This would sell well at TSC!
I agree, those holes should be in the center of that edge. I would make Deer give you a truly reversible edge.
Also, other manufacturers do make longer shoes if you need them.
Really nice looking setup, must have been $$$
One thing I don't like, it sit's so far from the mounting plate.
For what you want, I would go with 60" to start. With that digging you will want a smaller bucket! Also you will not be using the replaceable edge with most tooth bars, just a heads up.
I have a...
Congrats! Very Nice!
I have a 01 4300 with over 2k hours, runs like a champ. Congrats on your purchase. I see a loader in your future. Any 300 series or 430 or 440 loader will work. Make sure you get the 4x00 series...
Just buy the Harbor Freight unit for 89$
I have forks to go with this! Best Offer!
I would go no smaller than 16' with tandem 3.5k axles.
I my experience the DOT doesn't care so much about what's printed in the door as "GCVWR". Think that is more of a liability thing for Chevy, you pull more than 12,100 and they are not responsible if...
I just found this document for VA fee's, they are MUCH more reasonable. Looks like it's only 100$ for a perment trailer tag or 40$ a year for 4k+GVWR, I am sure they require an inspection, and 10$...
Well here in MD it's expensive, real expensive IMO. These are the rates for 2 years:
3,000 lbs. or less $51.00*
3,001 - 5,000 lbs. $102.00*
5,001 - 10,000 lbs. $160.00*
10,001 - 20,000...
I believe he said the upgrade ran in the 2k range, but the dealer gave him an excellent trade in on his old trailer.
I personally don't want to have a CDL, laws are more stringent and the cops...
Also, I would HIGHLY suggest you put a sticker on each side of the tongue that says "Not For Hire". This will help keep DOT off your back.
And lastly, I always suggest registering trailers in...
My 03's went at 165, replaced by dealer under warranty and I am at 215 now and have no issues at all.
I agree, a very nice trailer indeed! I probably would have preferred a 25+5 myself. A...
They are 2k on Kennedy's site right now.
I know there are cheaper places out there. Kennedy is good to deal with though.
What were you storing???
You need some forks for that thing, I will give you a good deal. Hit me up!
That's a nice trade price, what the rate on the new one though? You will REALLY be working that LB7 then.
Might just be time to upgrade to a tandem dually trailer.
Looking really nice! I too think the idea of putting a door and ramp on the back side to store equipment upstairs would be a really nice addition.
Nice work. Wish I had the tools available to build this kinda stuff.
Looking really good!
Nice update! How much does that blower weigh?
Nice tractor! Trailer too!
They are the same, it will work.
I think you're correct, oops.
Nice looking setup! How much did the splitter run you?
Attached to a 300 series loader:
The 500 series loaders place the lower pin around 2" lower from the top bracket than the 200/30/400 series loaders. Some implements have both sets of pins, but many do not.
Seriously, if I was considering spending 5k on a backhoe, I would just keep saving and buy a mini excavator. They can often be had, starting around 10k at auction.
You rent the Case, or borrow from a friend?
Looks funny with those R4's for sure... Looks like you got the wheels sizes that would come with AG tires, supprised they dont use larger wheels with the R4's.
Could be stuck brakes, it's a common issue esp on HST's. Search the forums for this issue.
What kinda deal are we talking? Might be worth picking up and flipping.
As I said, I dont have any right now but this is good info.
I've looked, and they don't list part numbers or anything. Not a very well put together site. And if you want LED lights, you can...
Here are some photos of one that is up for auction today.
It's OEM part # M807906
I think it looks like this:
I am trying to find out what headlight bulb type the 4x00 / 4x10 tractors utilize.
I have none right now, can anyone check for me? I read here that the 4x20 series uses H4 but I am pretty sure...
When HF first came out with them many many years ago, there were a few issues because the spacing was a bit different. Didn't take them long to change the design. They have been discussed in detail...
Those are awesome! If only they had stores closer to me!
Harbor Freight. Works just as good as the others, for under 100$.
There fork frames are probably just as light as the light construction attachments forks, its the actual forks themselves that are heavy. Compare 1800 lb lifting to 4500 lb lifting.
They have one called a Billy Goat mower, works really well.
What exactly do you mean by "front axle pivot", where the center of the axle mounts to tractor?
Here is a copy of the service manual, it will be of great assistance to you ;)
Tm1677 4200 4300...
I know on the the other 4x00 models I have worked with, you turn the key to the on position and then press the key in to activate the glow plugs. I know the 4100 is a bit different, but if you have...
I'll do you one better... 84.99 (exp:11/18)
Here is is for 99.99
CAN OBD II Code Reader / EOBD Scanner
That really depends on the pin weight of your GN and if you are comfortable pulling it with your tractor. You should check the 3PH weight rating on your tractor to ensure it can handle the load. I...
I would have kept the 4320 and change out the tires but that's just me. You could have gotten a hydro, loader mounted blower. I have a 300cx loader and wish I had the 400's lifting capabilities!
Nice! Love the addition of the powered woofer!
That is unusual... Also those nuts should obviously be a little longer as well...
Why pay more??? Same thing with a better quality spear for much less. They use a 3k lb rated spear that is manufactured in Germany, not China....
If you just want a rear 3PH hay spear, check these out.
Hay Spear Attachments | 3 Point Hay Spear Attachments | palletforks.com
I have the one that doubbles as a trailer mover as well. Works...
You just got a tractor... You will soon relize forks are one of the most useful attachments (assuming you have a loader). I would consider the forks that I posted in my first post.... You can add on...
TCS Rake for 499:
CountyLine® Landscape Rake, 6 ft. - 2128325 | Tractor Supply Company
King Kutter for 499 (at northern tool)
King Kutter Landscape Rake — 72in., Model# YR-72 | Category 1 Disc...
You can get forks that double as a spear.
Hay Bale Spear, Bale Spears
For the price of a loader... I would just sell your tractor and buy another one. 4300 can be had for under 10k sometimes, with loaders.
Shipping was 12.64 to me in MD. HF is still the best place to get this.
When I search on the site with those numbers nothing came up, clearing I was doing something wrong.
Does anyone have updated numbers for these? These part numbers no longer seem to be correct and I was not having much luck finding them.
Soooo glad to see the new JDQA forks on the site!!! Any discount for us repeat customers, who have been waiting forever for these ;)
Here is a good link, it's 1150 right now.
15,000KW Rural King PTO Generator by Sigma Powers Inc for $1,149.99 - America's Farm and Home Store
I was wondering the same thing when comparing the photos...
Did you also clean the screen when you did your last hydro fluid change?
When is the last time the fluid and filter was changed, along with the screen being cleaned? It does sound like a clogged filter or screen.
Find your parts here, you will be able to tell if they are interchangeable.
You wont be happy with that blade anyway. For the money, a rear blade is hard to beat (bang for buck) when it comes to light snow removal in our area.
Any of the 4x00 series should work. Ebay and classifieds of machines being parted out will probably be your best bet if you want deer parts.
Grammer is another option...
Dealers: GRAMMER AG:...
Congrats on the new machine!
I agree with most, probably not the best idea.
The shop addition looks great!
Think the 1/2 off shipping is a gimmick to get you to not "think" about your purchase. Like an infomercial. They advertise it ending tomorrow (4/25) on their site right now.
I don't really like...
Don't take allot of photos, but here are some I got the other day moving some logs.
Price all depends on your location... For 200, I would have passed on that in my area. Looks nice cleaned up! Would appear you have gotten your moneys worth already though!
You can't... I know it was over 2, but then I stepped away from my computer.
On lot 200 right now.
I am bidding online right now.
I participate online usually, VIA the website above. I am in Auctions a few times a week. To bid online it does require a 5k credit card deposit or 10k escrow deposit.