Search:

Type: Posts; User: kneedeep; Keyword(s):

Results 1 to 100 of 994
Page 1 of 10 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    4
    Views
    447

    Box Scraper Re: Mahindra Box Blade review?

    Mahindra rebadges their 3 PT equipment. Shop around, might find a good one on CL
  2. Replies
    10
    Views
    756

    Re: 7010 Reviews Wanted

    I really want a cab tractor in the 65+ HP range so that I can get out of the elements for the hot and nasty work. Mowing field edges, levees and food plots, spraying, etc that is done in hot summer....
  3. Replies
    64
    Views
    6,753

    Re: My Place: a CAT, Mahindra, and Ducks

    I have used gypsum broadcast to remove the muddy sediment before. It seems to form a fine glaze on the top of pond and as it settles down taking the solids to the bottom. may take several...
  4. Replies
    10
    Views
    756

    Re: 7010 Reviews Wanted

    BobG

    The 5500 4WD has 800 Hours- 500 when purchased. It is a good machine and simple. You are right. I need to keep it and put new tires on when the old fall off!

    kneedeep

    474495474496474497
  5. Replies
    3
    Views
    383

    Re: Mahindra 7010 Reviews Wanted

    Must not be many 7010 owners out there
  6. Replies
    10
    Views
    756

    Re: 7010 Reviews Wanted

    Wildlife food plots, mowing, FEL work, dirt work, spraying, maintain property, etc. I have a 3510 w backhoe for digging. Just want a cab. Probably sell the 5500 when I find a cab tractor.
  7. Replies
    64
    Views
    6,753

    Re: My Place: a CAT, Mahindra, and Ducks

    I could not even get them to send medical records to me, always claimed they were in the mail. Gave up and moved on, a real MD took good care of me and I just went on with my life. The hammer toe...
  8. Replies
    9
    Views
    593

    Price Check Re: L3650 ...is it a good old tractor

    Another satisfied poster on TBN!

    Hope I can get some replies on my post for the 7010 reviews that I found.
    :thumbsup:
  9. Re: Farmers lobbying for the right to fix own tractors

    Personally, I will NEVER buy a tractor the requires a computer to run for those reasons.. There are too many pre-computer tractors out there that will last a lifetime if maintained properly

    JMHO
  10. Replies
    6
    Views
    783

    Re: Put those ROPS lights on inside

    You also need to change the rules on the ROPS height, to allow them to go underneath a standard garage door IF YOU WANT US TO USE THEM.





    Lower the tractor!!
  11. Thread: block heater

    by kneedeep
    Replies
    1
    Views
    421

    Re: block heater

    Fits all tractors
    ...
  12. Replies
    3
    Views
    383

    Mahindra 7010 Reviews Wanted

    Posted on Mahindra site with 78 views and 0 replies, maybe do better here!

    Found a 7010 w/Loader & cab- 2008 model, new injector pump, 1250 Hours, one owner. Asking $24500.
    Want to look at it...
  13. Replies
    10
    Views
    756

    Re: 7010 Reviews Wanted

    :anyone:

    78 views :reading: and not a single comment :muted:??

    Come on people, speak up :bullhorn:!
  14. Replies
    10
    Views
    756

    7010 Reviews Wanted

    Found a 7010 w/Loader & cab- 2008 model, new injector pump, 1250 Hours, one owner. Asking $24500.
    Want to look at it and need some advice from any 7010 owners as to things to look for that may cause...
  15. Replies
    64
    Views
    6,753

    Re: My Place: a CAT, Mahindra, and Ducks

    Brandi,
    First 2 surgeries were when I just bought my farm and while attempting to patch the roof on the old ragged farmhouse (now destined to be demolished), the ladder slipped and I fell about 8...
  16. Replies
    46
    Views
    3,994

    Re: If I was a barn builder

    My old dad always told me " If it were that easy, everbody would be doing it!"

    JMHO
  17. Replies
    64
    Views
    6,753

    Re: My Place: a CAT, Mahindra, and Ducks

    If I ever get over all the surgery on my left foot and right knee, I'm gonna get busy on my place. I get inspired watching your progress on your place. Makes me want to get busy.
    I did get a Pole...
  18. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    GET-ER-DUN!!!
  19. Replies
    46
    Views
    3,994

    Re: If I was a barn builder

    If you can work a year, pay material and labor out of pocket without collecting large deposits and draws on incomplete jobs (your money is after expenses) and put ALL of your profits back into the...
  20. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    I put down 100 yds of 'road base'- mixture of sand, clay and large washed gravel, some up to 1" and rolled it in lifts. Crushed stone cost as much as ready mix here. Nearest pit is 100 miles.
    ...
  21. Replies
    32
    Views
    2,192

    Re: Tractor Insurance?

    I had insurance with State Farm on my tractor and Kawasaki Mule in Alabama. You need a Marine policy.
  22. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    This is the Almost Deluxe Southern Constant Airflow Version!! :laughing:


    It has a Ventilation Fan on the side! :dance1:

    473042
  23. Replies
    6
    Views
    828

    Re: 5500 4WD Service/Owners manual needed

    On the way-
  24. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    I could not find a Wind # in the literature, I'm sure that Reeds would be able to answer that based on location and structure.
    Maybe some will remember the carport that served as a temporary shed...
  25. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    I agree Eddie,
    Dollar for dollar, this is a very economical and versatile building that has multiple uses. I preferred a Red Iron shed but the $$ and extra work (concrete piers/ footings on me)...
  26. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    The crew finished Sunday afternoon about 3:00 and had site cleaned up and tools loaded by 4:30. I had looked everything over well and other than a couple of screws here and there, did a great job...
  27. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    The Bar Joist are 10' O.C. with 2x6 purlin 2' O.C. The roof metal is screwed 16" O.C. All the components tied together create a very ridged and strong structure. At one time there were 4 men on the...
  28. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    Crew came back Sunday to finish up. The weather was clear and they got after it early.

    472688

    472689

    472690
  29. Re: Looking for folding Canopy that mounts to ROPS

    If tree limbs are the problem, eliminate the low limbs where you mow. I did after being face slapped on time too many!

    472687
  30. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    The guys worked in wet dreary conditions till noon then after a break, finished the trusses, purlins and one side of the roof. All that activity really made a mess of the beautiful pad but I tried to...
  31. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    Roof only with gables trimmed down erected without concrete for post was $5.25/FT
  32. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    The crew was scheduled to start Sat AM June 4, So Delta and I came over on Friday PM. Ran into a little rain south of the farm but forecast was thunderstorms till mid morning Sat.
    Well, it rained...
  33. Re: Calculating Cantilever Load Limits - Rule of Thumb?

    Anything unsupported is unsafe
  34. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    It is amazing how fast a trailer load of dirt becomes a few inches over a small area!
    Then gets even thinner with a 2K# roller :confused:
  35. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    After shopping for a good supplier, I went with Reeds Metals in Tupelo, MS. Home :: Reed's Metals
    They were easy to deal with and changes prior to delivery were easy, I had wanted a 40 x 50 Pole...
  36. Replies
    27
    Views
    2,901

    Re: Pole Barn For My Equipment

    After the pad was roughed in, had to head home for a Memorial Day weekend with my kids in USAF at Augusta, GA (Brad married Collen who is active duty USAF in April this year) Had a great time BUT...
  37. Replies
    27
    Views
    2,901

    Pole Barn For My Equipment

    Had the farm 5 years next month and seems I have spent most of that time recovering from 3 Left foot surgeries, 2 Right knee scopes/cleaning and finally could not take any more pain so here I sit...
  38. Replies
    19
    Views
    2,406

    Re: Concrete Sealer for Pole Barn?

    Any sealer is better than none. The cost well be determined by what type of finish floor you want. Anything hard and permanent is going to cost more than a product that has to be reapplied.
    Google...
  39. Re: Restoring old Implements back To there former glory

    I have several old implements that are still usable. Each one can operate as designed, some still need some work to be best they can. I will eventually repair all to excellent working condition,...
  40. Replies
    8
    Views
    1,124

    Oil & Fuel Re: Used low sulphur fuel in 2002 4110

    I put a quart of 4 cycle oil in a 55 gal drum when I fill it with the low Sulphur fuel to help lubricate the fuel pump on my 03 and 00 year model tractors. Use some Diesel Sta-bil and Power Service...
  41. Replies
    20
    Views
    4,123

    Re: 4110 radiators

    I use a Commercial Coil Cleaner for HVAC units that my friend uses when he services my AC at home. Put in a pump up sprayer and soak it real good and wash out GENTLY from the rear every time I grease...
  42. Replies
    21
    Views
    2,309

    Re: I have a MAHINDRA 4500

    My 5500 leaks as well, not too bad. Just enough to be aggravating. It is the Seal in the steering box at the bottom of the column. I have been using ATF in it and it has really slowed down. Plan on...
  43. Thread: Bent drawbars

    by kneedeep
    Replies
    4
    Views
    651

    Re: Bent drawbars

    Shoup Manufacturing - Agriculture Parts, Ag, Replacement, Equipment
  44. Re: Actual stories of lawsuits for doing tractor work for hire.

    My Grandpa always would say, "You can sue a Ham Sammich if you got enough money to hire a lawyer!":confused3:
  45. Replies
    12
    Views
    896

    Re: 5530 trans dipstick location

    My 5500 trany and hydro are on the rear. The square plug on top of the rear end housing has a dipstick attached for hydro and down below rig right the PTO on right side is a plug for the tranny
  46. Replies
    73
    Views
    6,878

    Re: 250' water line: got some questions

    What he said?? :number1:

    :confused3: :confused2:
  47. Re: Using my Cabela's LM55H Cab Tractor w/ LD108 Loader

    It didn't happen without pictures!:no:
  48. Replies
    10
    Views
    5,042

    Re: Some weird things from around the world ...

    How about Big Boy Toys?

    469489

    469488
  49. Replies
    33
    Views
    3,751

    Tractor Sizing Re: Help selecting the right series of tractor

    I agree with bspeedy about a 3pt backhoe if you don't have heavy soils and big digging projects to do. Used with care and respect will give you a lifetime of good service.
    I had lots of heavy...
  50. Replies
    33
    Views
    3,751

    Tractor Sizing Re: Help selecting the right series of tractor

    Choose your tractor based on a established Dealer for brand, size would need to match the intended use and attachments purchased or to be in future, personal preference and cost. A good dealer will...
  51. Replies
    26
    Views
    7,230

    Re: free straight line smart phone app

    It might help if you had a large enough target that is red. I have a laser level that came with a small magnetic target that is red you can see the laser dot in sunlight.

    I just follow the edge of...
  52. Replies
    15
    Views
    1,912

    Re: lift arms too short?

    `Put the washers on the lift pins and put a Lynch Pin thru the washer hole to keep the PATS from sliding off the lift pins.
    Turn the washer opposite of the picture so pin will snap completely shut...
  53. Replies
    34
    Views
    5,082

    Re: Mahindra MPOW85 has no power, bought New:

    He probably pulled on that throttle out of frustration and shot that workhorse in the air :laughing:

    467185

    467186
  54. Replies
    24
    Views
    3,204

    Re: 3pt, PTO, Diesel

    There are good midsize 75HP+ tractors selling in the auctions for good prices. One that size would give you much better performance than a SCUT and probably be about the same money. Smaller tractors...
  55. Replies
    34
    Views
    5,082

    Re: Mahindra MPOW85 has no power, bought New:

    Lower the gear and raise the RPM!! Make that bad boy work! You got it all choked up- Let the stallion run man!
    :steeringwheel:Check out my avatar-That aint 1200 RPM!
    Adjust your speed with the...
  56. Replies
    6
    Views
    1,174

    Re: Is it just me...

    Does it throw it on the tractor/operator from top or bottom?
  57. Re: Need a cell phone app for tracking field work?

    Those were pretty expensive. I barely make enough over inputs and mantanence to cover taxes and utilities. I was basing my opinion on ROI and for that accuracy, lot better options to get the job...
  58. Re: Need a cell phone app for tracking field work?

    [QUOTE=joefromga;4436358]You can get high precision with an external antenna with Bluetooth that connects to your phone.

    To get less than 2.5 meters accuracy you will have to dig deep in the...
  59. Replies
    6
    Views
    1,174

    Re: Is it just me...

    Plate will get out of wack. I take a big adj wrench & get it back even.
    Still why does it throw on operator??
  60. Re: Need a cell phone app for tracking field work?

    Farmlogs has a upgrade that will do it but it is $$$$$$$$. I have been trying to find one for a while, nothing that doesn't require expensive equipment and service subscription for a app that I have...
  61. Replies
    6
    Views
    1,174

    Re: Is it just me...

    I don't use a auger (agitator) in the tub for that reason. I mix seed and fertilizer as I load or just fertilizer and don't overfill the hopper. When it is on, the spreader throws only to the rear or...
  62. Replies
    13
    Views
    2,111

    Re: A Different Use of A Tractor

    Backhoe would have been more effective and loaded it on a getaway truck. If he had only ask for ideas! :loser:
  63. Replies
    12
    Views
    2,445

    Re: Fixing our BX Post Hole Digger

    What is your fix for this?
  64. Replies
    83
    Views
    12,007

    Backhoe Re: Attaching a Backhoe to the 3-Point Hitch

    Opinions vary greatly concerning tractor mounted backhoes. My buddy laughed when I told him that I bought a Subframe mounted Mahindra BH for my 3510. He claimed I needed a 'real' BH like his ragged...
  65. Replies
    16
    Views
    2,056

    Re: Problems connecting hydraulic implements

    Try to build something like these

    465585


    465586
  66. Replies
    48
    Views
    9,341

    Re: Backhoe fun - a picture thread

    The BH is one of the most used attachments on the farm next to sprayer.
    465394
    465395
    465405465402465406465403465400465404465401
  67. Re: Building a boomless sprayer-Continental Belton pump?

    Just buy a pto roller pump. still got to get the pressure valve and regulator built to control volume
  68. Replies
    13
    Views
    2,344

    Quick Hitches Re: Quick Hitch- Pat's or HF

    The Hydraulic Top link I got before the Pats was actually a little too long anyway, works just right with the Pats now. I really only use it with the box blade and mower. Everything else works better...
  69. Replies
    13
    Views
    2,344

    Quick Hitches Re: Quick Hitch- Pat's or HF

    Pats and a longer Top Link- Best for different types of equipment. Easy to hook and unhook
    Adds 4 inches to Lift arms

    464279

    464280
  70. Re: Share Pics of People Hauling or Towing Something Wrong

    Another Bamer Trucker!! :eek:

    In the Hammer Lane no less!



    463798

    463799
  71. Replies
    3
    Views
    399

    Tires Re: Farmall 140 2 row

    I think the 140 was designed as a one row tractor with the offset engine so the operator can see the one row being cultivated.
  72. Replies
    198
    Views
    52,803

    Re: Most Useful Minor Additions to Tractor

    A Fire Extinguisher
    A Grease Gun
    A Hydraulic Limb Saw Limbinator Saw User Guide - YouTube
    A Grapple
  73. Thread: Perma-Columns

    by kneedeep
    Replies
    14
    Views
    2,363

    Re: Perma-Columns

    What if one side of the Pole barn was connected to a 40' Shipping container? Would the wind shear be reduced if Perma Columns were used for the opposite side?
  74. Replies
    1
    Views
    671

    Re: repair manual '07 Mahindra 2615 4wd gear

    Try Ebay, Amazon, manuals.us or Mahindra Dealer
    Somebody will have one.
  75. Replies
    27
    Views
    3,104

    Re: Looking at Mahindra -Opinions?

    I have owned 3510 for 15 years and the only issue I have ever had was the fuel filter leaked and I just put a inline filter in and use clean fuel. Put a backhoe on it couple of years ago and have...
  76. Replies
    3
    Views
    362

    Re: Big Bee 4' Bush Hog leaking

    If its a slow leak, add some Lucas to keep gears lubricated. If its a bad leak, bearing and or seal might have to be replaced
    I would not advise grease in a mower gearbox unless it is cornhead...
  77. Thread: backhoe

    by kneedeep
    Replies
    2
    Views
    629

    Re: backhoe

    Looks like the 511 may be what you are looking for, nice backhoe.

    460201
  78. Replies
    13
    Views
    1,552

    Re: Planter row spacing problem

    Center the 2 planters between your tires and set the cultivator to match the planter. Use wide enough sweeps behind the tires to plow the wider row between the 2 narrow rows. adjust seed...
  79. Replies
    7
    Views
    1,365

    Re: 3510 overheat question

    My 3510 radiator fins have narrow spacing and clog easy. have to blow them out from inside regularly when mowing or in dusty conditions.
    If the battery sits in front of the radiator, it may not be...
  80. Replies
    83
    Views
    12,007

    Backhoe Re: Attaching a Backhoe to the 3-Point Hitch

    Tough as a old boot

    458163
    458164
  81. Replies
    11
    Views
    1,815

    Re: 8560 tractor nothing but trouble

    Did you purchase new from a dealer?? even if not, unless time has run out, it still should have warranty on it for some of your issues.
    I tested a 8560 for a couple of weeks (used) that was beat...
  82. Replies
    11
    Views
    1,815

    Re: 8560 tractor nothing but trouble

    You should contact Mahindra and ask for a field rep to hear you out.
    Also, perhaps you should document all the issues in chronological order and not be so mad and negative toward Mahindra in...
  83. Re: Battery Charger/Maintainer Mounted Under Tractor Hood

    Had a OEM battery on the 3510 last over 11years with a Battery Minder on it. I use them on all my batteries including my 2500 Diesel with 2 batteries running on 1 tender. Have to test batteries to...
  84. Replies
    9
    Views
    1,542

    Re: 5500 trans vent leak

    This thread is 7 years old
  85. Replies
    11
    Views
    2,927

    Backhoe Re: Manual thumb attachment

    I have Factory thumb on my 509 as well. Its heavy and I use a 4x4 block on the teeth to maneuver it in place to pin down and up. Makes it easy to do.
  86. Replies
    18
    Views
    4,797

    Re: Used Mahindras

    Why trade a good tractor that is paid for? Just buy another that has what #1 did not, then another, etc!

    Doesn't cost much to let them rest in a shed till you need them.
  87. Re: Needing an owners manual for a Mahindra 3510!

    Sent :wizard:
  88. Re: Needing an owners manual for a Mahindra 3510!

    I also have a 4500/5500/6500 4WD Qwner Manual and ML265 Loader PDF before the site went down

    Rod
  89. Replies
    17
    Views
    2,721

    Re: New member introduction

    If there is a good, well established dealer near by, a Mahindra will be a great machine for your needs.
  90. Replies
    30
    Views
    2,603

    Re: Essential tractor features

    Shuttle Shift
    FEL
    MFWD
    remote
    Quick Hitch
    NO ELECTRONICS- Buy used
  91. Replies
    30
    Views
    2,603

    Re: Essential tractor features

    Shuttle Shift- no Hydro
  92. Replies
    1
    Views
    220

    Re: Mahindra 4500 4wd power sterring leak

    See my thread about 5500 4 WD
    We need to find a good Hyd shop to rebuild our HSU

    http://www.tractorbynet.com/forums/mahindra-owning-operating/345577-steering-leak-5500-a.html#post4260412
  93. Replies
    16
    Views
    2,222

    Re: Mahindra 4540 vs. Massey Ferguson 1742

    Get a Mahindra with Shuttle Shift and whatever other features you want. Mahindra has some good incentives and financing including equipment,
    Get a bigger tractor than you think you need.

    JMHO
  94. Replies
    3
    Views
    509

    Re: recent purchase

    Post on the Mahindra site at the bottom of the Forum page. Lots of help there and several dealers also on site
  95. Replies
    7
    Views
    519

    Re: Steering leak in 5500

    Thanks for the help

    Rod
  96. Replies
    7
    Views
    519

    Re: Steering leak in 5500

    Thanks,
    Good advice to rebuild unit if I am taking it out.
    How difficult is it as far as taking unit apart and replacing the seals?

    Should it be done at a Hyd. Shop or is it a do it...
  97. Replies
    7
    Views
    519

    Re: Steering leak in 5500

    This is the only rebuild kit for my tractor. Any other place to get it? Ser#SRS 1005

    SEAL KIT FOR HYDROSTATIC FOR EARLIER STEERING BOX ON ALL 5500 MAHINDRA TRACTORS
  98. Thread: in need of

    by kneedeep
    Replies
    5
    Views
    407

    Front-End Loader Re: in need of

    Try Bills

    MAHINDRA TRACTOR PARTS
  99. Replies
    7
    Views
    519

    Steering leak in 5500

    The 5500 4WD started leaking fluid from the top of the steering column. It continued to leak until the fluid level got low, but not too low. If I fill it to full, it will pump it out of the top of...
  100. Replies
    13
    Views
    1,152

    Re: Would this be ok

    Mowers work best wider than wheel tracks. they will make the flattened grass stand up and some will be cut.
Results 1 to 100 of 994
Page 1 of 10 1 2 3 4
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.