Search:

Type: Posts; User: cantbeatadeere; Keyword(s):

Results 1 to 48 of 48

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    685

    Re: JOHN DEERE MECHANICS

    I hear ya Jim...just can't deny the overall condition, it's had some love over the years...the owner said the noise is there all the time even with the trans in reverse and the reverser in forward,...
  2. Replies
    7
    Views
    685

    Re: JOHN DEERE MECHANICS

    I want to buy the machine but don't want to get burned with a costly repair right out of the gate...this noise must not be common, I have searched this out a bit and nothing so far..parts breakdown...
  3. Replies
    7
    Views
    685

    Re: JOHN DEERE MECHANICS

    sound like its just behind the flywheel area,don't have a manual to look at and see what is there so I posted here to see if anyone has had this problem.
  4. Replies
    7
    Views
    685

    JOHN DEERE MECHANICS

    just looked at a 79 350c...good shape with one big concern, the dozer makes a loud knocking noise when backing up. I didn't think till on the way home I should have tried it in reverse...not just...
  5. Replies
    44
    Views
    4,779

    Re: 3pt splitter

    TIMBERWOLF TW3 hd..........nice work ovrszd:) and looks like a fun wheelie bar.
  6. Replies
    44
    Views
    4,779

    Re: 3pt splitter

    Just my opinion, but there is only one that I would buy after lots of research and first hand inspections of quality, design and ease of function............timberwolf tw 3HD
  7. Replies
    1
    Views
    337

    wallenstien fx 90 logg winch

    Well I thought I would post on my recent purchase of a log winch. I have been considering one for some time and finally pulled the trigger. I have a 03 4710 w/ ag tires - loaded, and some good size...
  8. Re: New X700 Series vs late model X700 Ultimate series

    I also thought about upgrading, but without the ability of the FEL I guess I will have to keep my 06 728. these tractors are hard to beat. My cousin is a landscaper and he purchased a 738 early in...
  9. Replies
    15
    Views
    1,718

    Re: BRAND NEW 728 PROBLEMS

    Although they are known for poor service, this was acceptable in my book. :)
  10. Replies
    15
    Views
    1,718

    Re: BRAND NEW 728 PROBLEMS

    All is working properly now, they picked it up wed. and dropped it this morning and is mowing fine. the problem ended up being the solinoid on the rear of the transaxle, I suspected that aswell and...
  11. Replies
    2
    Views
    436

    Re: 54" deck locked in up position

    I have seen this problem....o.k. ....if the lift arms are not adjusted properly they will come up and touch the frame of the tractor before the hydraulics stop at full travel, then, if you lock the...
  12. Replies
    15
    Views
    1,718

    Re: BRAND NEW 728 PROBLEMS

    I agree that any disassembly, would be crazy, figured if it were a simple diag. and repair I would just do it myself as i have the sevice manual. this is not a simple fix at all by the service...
  13. Replies
    15
    Views
    1,718

    Re: BRAND NEW 728 PROBLEMS

    Yes, dealer has a poor rep, but was the only one within a three hour drive with a 728 left. hand were kinda tied.
  14. Replies
    15
    Views
    1,718

    Re: BRAND NEW 728 PROBLEMS

    I have been looking in the service manual and there are a couple pressure test ports to narrow it down, prob a couple hour process and a trip to napa for a pressure guage and adaptors/fittings, it...
  15. Replies
    15
    Views
    1,718

    Re: BRAND NEW 728 PROBLEMS

    yes, the blades will speed up but as soon as you touch grass the blades stop, you can engage the 62 inch deck at an idle and hardly drops the eng.
  16. Replies
    37
    Views
    6,355

    Re: Auto connect on x7 series

    my father just bought a 720 and he is thinking he made a mistake by not getting the newer auto-connect, he is 75 and shoulders are shot, even though i am just up the road he hates to ask for help for...
  17. Replies
    15
    Views
    1,718

    BRAND NEW 728 PROBLEMS

    First off everyone will say take it back...local dealer owns the 7 stores around us with a poor service reputation. I would like to at least diag. it myself. the tractor was picked up this...
  18. Replies
    16
    Views
    1,753

    Re: new 45 loader WooHoo !

    arlen, you are correct.....you will get the feel of where level is before the top of the bucket will help:)
  19. Replies
    16
    Views
    1,753

    Re: new 45 loader WooHoo !

    geek, that relief valve is exactly what you shim.....I installed a pressure guage in one of the ports, pulled the lever to see the current psi....it only takes the thinest shim to gain big, dont over...
  20. Replies
    13
    Views
    1,800

    Buying Advice Re: Gator 825i

    My father bought one 2 ?? years ago, we work it year round clearing snowmobile trails and doing firewood. very strong unit.
  21. Replies
    22
    Views
    2,275

    Re: X748 Arthur Randall plow

    think you did good with the plow, was looking into one myself....oversized??????---these tractors are an animal for there size with a bit of added weight...in the snow that is...agree smaller would...
  22. Replies
    16
    Views
    1,753

    Re: new 45 loader WooHoo !

    OOOOH one other thing, install a small black bungey to hold the hoses away from your tractor (saves scratches). I also tape everywhere my cab touches in the winter with 3m body shop masking tape(also...
  23. Replies
    16
    Views
    1,753

    Re: new 45 loader WooHoo !

    I have owned one since 04 and they work VERY well, load the tires w/ washer fluid and weights. also hange four weights off the back. I am thinking back a ways but I increased the hydraulic pressure...
  24. Replies
    4
    Views
    1,364

    Re: Cab x738 Need more info

    I have a 728 along with the same cab you have and remove it every spring...very simple, about 20 min. job. flip it upsidedown on a carpet covered pallet and done..............my question is will this...
  25. Re: Just received a link to the new X700 series teaser video

    looks to me that it is a drive over deck as well....not sure if i like that
  26. Replies
    2
    Views
    1,372

    john deere 350c dozer

    anyone know enough about the 350c dozer to know the year....looking at one with the tag missing and would really like to know the year before buying......thanks
  27. Replies
    1
    Views
    514

    Buying Advice 450c serial num. breakdown

    I am looking at a 450c and the guy thinks its a mid 80's....300257 is the serial #on it...can anyone tell me soon...thanks, no hour meter on it either.
  28. Replies
    15
    Views
    5,795

    Buying Advice Re: Frontier Wood Chippers

    I am sure that would work well on that tractor....prefer a model with hyd. feed myself. once you start chipping your brush, you will never go back to burning/piling. I pull a tree out...
  29. Replies
    5
    Views
    1,372

    Re: 825i gator

    dealer covered the shaft:thumbsup:, also the new shaft has a new part number. don't think they would change the num. if the shaft was the same so prob. a better/stronger part. still won't steer in...
  30. Replies
    5
    Views
    1,372

    Re: 825i gator

    if its not warranty this will fall under the category of NO GOOD DEED WILL GO UNPUNISHED...work in 13 deg weather for 7 hrs for free and have to buy a 230.00 shaft to boot, don't mind paying for the...
  31. Replies
    5
    Views
    1,372

    825i gator

    clearing snowmobile trail blow downs yesterday, hooked the jd winch to a tree and winched it loose, then was pulling it in reverse into the woods and needed to steer clear of a stump,soon as the...
  32. Replies
    14
    Views
    2,194

    Re: Log splitter

    casters are a great idea:thumbsup:
  33. Replies
    46
    Views
    4,920

    Mowing Re: Use Low Gear on hills!!

    aaaaahhhh, I see whistlepigs point to an extent.....my own exp. still strongly suggests useing the 4x4, been on some VERY steep grades and have yet to see a tire even slip while in 4 wheel, never...
  34. Replies
    46
    Views
    4,920

    Mowing Re: Use Low Gear on hills!!

    is it a riddle of sorts????
  35. Replies
    15
    Views
    2,044

    Re: Considering a FEL for my 2305

    even have a loader for my 728...cant live without one now.
  36. Replies
    5
    Views
    1,105

    Backhoe Re: NEVER seen this before

    to be exact....I was trying to "snap" the roots buy getting under them with the teeth and then creating leverage with the back side of the bucket on the ground and then curling and pushing down on...
  37. Replies
    5
    Views
    1,105

    Backhoe NEVER seen this before

    well, I was digging a stump out today with my 4710 w/ 448 backhoe and heard a pop sound, like metal broke?. looked around and didnt see anything, then my nephew asks " was this thing bent...
  38. Re: won't start, any way to remove loader?

    Do yourself a favor and replace the electronic fuel selinoid controle module part# LVA11884 before doing all that extra work, right behind the fuse panel---actually just hold steady pressure one way...
  39. Replies
    7
    Views
    793

    Re: 1965 farmall 424 compression

    thanks for the info art, in cny also. main thing I want to know still hasn't been answered. what is the cranking compression supposed to be on this motor??, seems it would have to be higher than 70,...
  40. Replies
    7
    Views
    793

    Re: 1965 farmall 424 compression

    gas...don't think he would have ever eitherd it
  41. Replies
    7
    Views
    793

    Re: 1965 farmall 424 compression

    I pulled the head, valves and seats looked good on the dead cyl. --- cyl. wall has a three finger wide score in it so I pulled the piston and the rings are covered by piston rub and obviously stuck...
  42. Replies
    7
    Views
    793

    1965 farmall 424 compression

    hello....looking for the cranking compression #'s for a farmall 424, three have 70psi an one has 0. seems 70 is way low to me, did find the ratio is 7:1 on tractor data though........thanks in...
  43. Replies
    7
    Views
    1,211

    Re: John Deere A help

    there are several reasons this could happen, plugged pickup screen, worn bearings, poor pump...even saw one that the pushrods had been drilled out for more flow to the rockers and it would not carry...
  44. Replies
    2
    Views
    890

    Backhoe Re: Thank God for this forum

    yup,:) the smallest adjustments can make all the differance
  45. Replies
    20
    Views
    2,363

    Re: Any JD4700 owners here??

    sorry...one more thing . I have ran this on a dyno and it pulls about 44-46 hp at pto speed and will pull 50-51 hp at about 1800 rpm
  46. Replies
    20
    Views
    2,363

    Re: Any JD4700 owners here??

    I have a 03 4710 with a 460 loader, 448 backhoe, graple, forks, snow push, wallenstien bx 62 hyd. chipper. bought it with 31 hrs on it in 06(along with service and parts manuals), loaded the ag....
  47. Replies
    2
    Views
    987

    wood chippers

    well, last summer I bought a wallenstien bx62 hydraulic feed chipper. after looking long and hard I decided to buy one of these units due to its overall value, I own a 4710 and figured it would be...
  48. Replies
    15
    Views
    4,773

    Re: Help me build my pole barn 30x40x16

    this is perfect timing on this thread, I am in the process of clearing for a 32x56 14' pole barn and some of my questions are being answered. I am going with a 5-12 pitch and 2 foot centers along...
Results 1 to 48 of 48
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.