Boy, you got me Randy.
Type: Posts; User: Willl; Keyword(s):
Boy, you got me Randy.
How did you test your battery ?
Recheck ALL 4 points of your large battery cables connections.
Brass float ?, if so shake it to see if it's leaking.
Wow, that bending the angle piece came out nice.
No rippling in the inside lip (bottom lip) ?
Electrical meter would come in real handy for this. Heck even a test lamp would suffice.
No research needed, I own one. So do lots of other folks.
And you can get any hoe you want and I wont blink an eye one way or the other.
Just don't tell me it's a common thing for 3pt hoes to...
How big of fasteners are these ?
Could be wrong, but I think they use the 3pt arms to lift/lower the MMM via linkages and rods..
Hey Pete, were you the one that built the huge boat in the yard along side of the house on 'A' street ?
That would be the 'grunt' system.
One grunt = 50 to 100 #
Two grunt = 100 to 150 #
Three grunt = 150 to 200 #
I would think this system would be just fine for your ap.
Save the torque...
I am so jealous of you guys that can step right outside and go shooting.
Come retirement time (another 6yrs) have plans to sell this place and move much farther out of town. Far enough out to...
That trailer deck looks slippery, steel ?
Do these units have external ballast resisters ?
If it did and was burnt out it would give the same symptoms.
Had an old friend that used a carbon lamp to burn an image into silk screen for printing T-shirts.
Sounds like that movie lamp rankrank was talking about. Boy that sucker would...
Yup, hot water is what I use.
Sounds like a key switch fault. I'd start there.
But for the life of me, I can't come up with a first name that starts with a U. What is it ?
Cat 1 on a 43hp unit ?
I for one did not, I even thought at first somebody missed labeled or toss their tree trimmings in the closest empty receptacle.
What part of it is cabbage ?, is the heart like other trees, the...
Well we decided on the BD Ni-Cad 18 volt. But it wasn't our first choice.
The first one we tried was the Lithium-Ion Ryobi Hybrid. It's AC-DC, didn't even dawn on me that would even have been an...
Heck, if you do decide to go new valve, get a 4 spool.
Yes, I read that in your first post.
Weed-n-feed type fertilizer ?
Sounds like its just drag from the lube. My JD does it too.
What do they call that ?, peristaltic ?
Why can't he just replace it ?
((Stole the pic from your link in the 'instruction' section.))
One of your circuits outlet pairs goes to P1 and P2
C1 and C4 go to the circuits you just stole from.
And lastly, C2 and C3 go...
"and the float is allowing fuel to flow quite well"
A broke in half tractor should be pretty common then given the number of 3pt hoes out there.
Don't like the diverter method ?
Also check out Hickok45's vid on the Judge.
The Judge - YouTube
Donut shaped shot pattern ?, I don't think so.
Ditto what ozley said.
Those shafts only move about a quarter turn or so. It's very possible they're at 'up' position right now.
Who installed these ?
Did you tell them how you wanted them to operate ?
This is an easy fix if you know wiring and such.
Local gun shop in my area is asking 329 and change for a Taurus 856 in .38
Same reason I replaced the one in my 790.
Out gassed like it was overcharging but meter said not.
Same here but a 00.
I think it's a good idea and would do the same.
This could be done safely but not the way he did it.
Must be in middle of install, I can see the empty inlet port on the L/S one.
2 bits it's a poor connection at one or more large battery cables.
You got alot better eye sight then me. I can't even tell what type of chain let alone gauge size.
Obviously it was in this condition when you first laid eyes on it, why did you buy it ?
"When Ambulance 19 broke down, it was transporting 34-year-old Nathaniel McRae, who had just been in a shootout with D.C. police."
I'm having trouble finding any sympathy at all. Hopefully no cops...
But not slipping when IN thick brush ?, not understanding.
What signs did you see to make you think it was slipping ?
Does the mower itself have a slip clutch or shear pin ?
If the choice is between a manual trans or a hydro trans, it would be a manual for me.
I could fix a manual if needed, hydro trannys baffle me.
Check my 790 in photobucket link.
Is that connection tight ?
Yep, that's what I do.
But I lower mine down on to wood blocks after physically disconnecting and just before disconnecting the hoses.
Could be wrong, but I'd be really surprised if that come-a-long moved it much past the cattails let alone up the bank.
3' base is a big tree. A big heavy tree.
If tubeless I'd use a plug.
If tube, pull it and glue patch.
Where you at jbwrangler ?
I've got 2 sticks of 5X5X5/16 approx 9' I'll donate.
They're heading for the scrap pile anyway.
Can you eliminate that junction ?
Looks like hoses going to it, what's on the back side of that plate ?, steel lines or hoses ?, where do they go ?
Or here too.
Whoa, I spy a bent cylinder rod ?
I know that stuff, sticks in your treads and turns the tire into a slick.
"I jumped off and the mower ran me over because it didn't shut down."
((he says as he quietly pulls the jumper and rehooks his safety switch back up.))
Would love to have a chair like that.
Looks like something wroughtn_harv would build.
Also, take a look at some of these U-Tube vids.
U joint replacement - YouTube
Some old sockets come in real handy doing this.
Cheap, but they work.
Basement Watchdog Battery-Operated Water Alarm-BWD-HWA at The Home Depot
Well, I won't have to worry about that. All mine have always been threaded. Came from the store that way.
Well how the heck did that happen ?, it don't look muddy. ;)
Moms almost 80 and still insists on doing her own yard work.
She has a very nice Stihl assist start but even so, not enough arm strength.
Thought about a corded, but the amount of cord she...
Are you using the dump circuit ? w/ regen ?
Try the boom circuit.
((had to edit that, mixed dump/boom.))
I haven't seen those since the GFCI requirement.
I edited my reply. Looking at the Verizon site at first glance looked like separate gizmos.
Breaking just on wind up, correct ?
What grade shear bolts are you using and what grade does the unit call for ?
I think the clutch you would be looking for is a 'slip' clutch.
Curious, why would you need to do this ?
Me too. Way to many hours of it. Nasty stuff.
I could be wrong but........Edited;
Then he needs one of his own.
Wireless High Speed Internet Service Provider - Clearwire
Maybe not quite what your looking for cause it is portable/battery powered but comes with a AC charger that you could just leave it...
Not a good idea to try to destroy evidence. Good or bad.
Tank vent clogged ?
Did you try removing fuel cap when it dies ?
Just poking at ya. ;)
Your right, my bad. I was totally thinking trailer deck.
Seriously, your looking for 'fine' woods to park your tractor on ?
And don't spew the longevity bs.
Map out those breakers now so you can do something like this later.
Thinking the same, minus rubber.
I know,,, I dislike even texting with my phone. If I get past 3 button pushes I'm just going to call ya.
Let along trying to communicate to a net forum.
BS Dude,,, you need to dump this feeling ASAP... nobody's out for you.
Although some of your meaningless threads do ig me, It'll let it pass.
Can that fancy phone even do regular phone calls ?
No problem here... Verizon cable.
How you guys hooked up ?
Pay a kid to go get it.
I think the hardest part when I went through this was 'knowing' exactly where the picture was on my computer.
Darn straight... http://mozorg.cdn.mozilla.net/media/img/firefox/template/header-logo.png
For those ready to experiment, you don't have to dump IE to run/try Firefox. They can both live on your...
I've got my browser setup with adware blocker, popup blocker, adverts blocker, script blocker. Blocker everything.
It's rare I see an add of any type.
You can control what you see on the net....
And ya gota leave the coating on it, that's coathanger flux. hehe
Voltage at battery ?
You guys all fancy... real braze rod is coathanger. :)
Loose the "cold roll rod" and go concrete.
Did you even sleep ? ;)
I see some sun shade in version 2. ;)
Any 'safety' switches on this ?, possibly you tripped one ?
Did ya grab a 'before' pic of the pipe ?
My reply was to the OP.