Search results

I have a JW03 backhoe on my Jinma 204. It is driven off the regular hydraulic system, not the rear mounted pump. I didn't get any literature on it and when I look at the specifications online, they seem to be for the model with a seperate rear mount pump system. I'm curious about the lifting...

I have seen a few mentions of Belly Mount mowers on the compact tractors and I'm wondering how these are driven.. I know that the small garden tractors use a belt drive off the tractor PTO shaft but wondered how this is accomplished on something like my Jinma 204.. Steve

I am thinking about putting a hole for ball hitch near the front edge of my loader bucket to use to move my various trailers, etc. around. I know the logical place would be on the drawbar, but most all the time I have something already on the 3 pt hitch. The main reason I want a quick way to...

My new JW-03 BH was assembled my dealer and everything seems fine, however it seems like the control levers for the side stabilization cylinders work in the wrong direction. When you push the lever down, the stablizer raises and when you pull the lever up, the stablizer extends. I'm not so...

As I mentioned in another post, my tach/hour meter is not working on my new Jinma 204. As suggested, I adjusted the sensor in the flywheel housing and also verified that the sensor would respond (close/open circuit) when I pass a magnet over the face. Connector is ok. So I pull the...

I just finished installing my new Brush Mower (brush hog) on my Jinma 204. (The brand is Chipper FWIW) I have a two speed PTO (540 and 1000 rpm) and I'm wondering what the correct speed should be. (assuming a standard gear head ratio) I've tried both and the tractor seems ok with the higher...

Just took delivery on a new Jinma 204 and now have about 4 hrs on it (can't tell for sure since the tach/hr meter is not working). After working the backhoe and FEL intially in creep and low range, reverse and 1st gear, etc. I took a drive to the mail box in high (creep) and high range. 4 wd...