Search results

like I said this is more of an experiment, the results what I have found are about 120 lbs more lifting capacity but also it sped up the lift time and dumping time, also my loader hoses were jumping around more which explains the increase pressure so at the end turned it back down to the...

turn up the pressure not much difference in lifting maybe another 150 200 lbs. the rear ballast didn't have to be increase. will leave it unless i blow hose or seals start to leak.

more of a experiment, first hose i bust i turn it back down as for getting killed it won't be from raising. the pressure 200 lbs.

Ive been reading here and on the internet that some owners turn up their hydraulic pressure on their 2520s been thinking about doing that any of you owners had done this? I check mine and its 2475psi thinking about going to 2700 will I break something or blow seals out with 200 more psi thanks

read some posts that some owners put some red dye in hydraulic oil so they see it better in sight glass is that a jd product or where does a person pick it up at?

looking for the length of the cross chains you owners of 14x17.5 r4 tires have with or without the cross chain hook. ran across a 1/4 barrel of cross chain and side chain with tool at a auction

What weight should a Jd 2720 carry on 3pt when using loader

time to change oil in 2720 engine/tranny just trying to figure out if it is worth the added expense. looking for opinions

Looking for the right size of planter plate for NK 199 sweet corn for flex 71 planter, look on web sites no listing, seed dealers no luck. Was going to order some seed but if cant find plate size will have go to different seed type. Any ideas?

Looking to make a towed Cultipacker with hyd. lift need pics of the ones that any of you built out there and what would you do different next time

You owners that have the 54 inch front mount snow blower with the amount of snow we all had this winter. How is the plastic impropeler working?

Looking for the right size of box blade for a Jd 2720 any of you owners have the box blade behind the 2720?

would it be possible to put a 59 inch front snow blower on a 2720 using a little fabrication or would this just be a nightmare

Looking for speed of JD 2720 in low range at pto rpm. Had a hand held GPS but that was a couple years ago. going to seed and fertilize about two acres and need to make sure of the speed, If possible would like to go 4mph to match the rate chart on spreader

Looking for 28 Cultipacker wheels any other sources for wheels besides Agri supply? They will not get their shipment in till end of August. Haven稚 started frame yet so could go bigger wheels if have to

I see here that a lot of builders use end bearings/pill blocks for the end shafts that the Cultipacker wheels are on and most of the Cultipacker wheels are meant to roll on a stationary shaft. Example is the wheels you get at Agri supply are designed to spin on a 1 3/4 shaft so the shaft does...

the set of forks I have they slide back and forth on a round solid bar. there is a lot of play in the forks. found some steel bushing that fit over round bar but would the welding hold if I welded to the top of forks? y

Does a 2720 have enough power to pull a middle buster? the people I talk to at tractor supply and other attachment sites all say not a problem but is that just sales talk ?

Before next winter I am going to get a 54 inch snow blower for my 2720 Need some input on likes and dislikes and did they ever go back to a steel impropeller?

would tire chains work on the front or is it to close to the steering parts

Do I have to go to a JD dealer to get a block heater?

Would this model work on a 3 point quick hitch system? Called two trac vac dealers they did not know. Hate to get it and find out it will not work on my Land Pride quick Hitch. It would also extend the pto shaft another 4 inches might not have enough shaft.

Any of you owners experience your lawn getting chewed up by the tread design of the R4s?

Will a 2009 54D mower deck from a 2320 work/fit on a 2011 JD 2520 with R4 tires? The JD 2520 is 52 inch wide