Search results

I have a TC25, 4wd, 9x3, that I would like to add a hydraulic remote (single valve) so that I can use a log splitter. I understand that the splitter will have its own valve but this seems like it would be the most flexible means of providing the hydraulics. It seems as though this would not be...

I have just changed the fuel filter as the rngine seemed to be bogging down on steep inclines and I thought that the fuel flow was fowled. After changing the filter, the engine cranked up and idled as I rolled back from my garage and then the engine stalled. There is flow through the filter...

Does anyone know of a good web site for NH parts and accessories? Pictures and prices? I need tail light lenses, bulbs, work lights, brush guards, etc.

The tach on my TC 25 did not work while I was running my tractor today. Only has 200 hours of use on it. Any idea what the cause might be? Any suggestions on how to troubleshoot or repair?

3 pt. won\'t hold arms down I have a TC25 My 3 pt. lift arms raise, lower and hold position just fine as long as the load forces are downward. An upward force moves the lift arms upward with out any downward resistance. I checked the linkage and found that there is an additional arm, similar...

After reviewing the posts here and in other forums regarding the power steering noise, as well as the maintenance schedule, it sounds as if power steering/hydraulic noise is common in cold weather. Why is that? Why do automobiles not react to temperature change that way? What is happening...

I have just started experiencing a whining noise from my power steering pump, which translates a vibration up through my steering wheel, when the engine is under load or turning sharply. I was told that is could be a dirty filter. The hours just turned 200 so it is time for the 50 hr service...

I have an FDR 1560, Landpride finish mower, and I cannot remove the bolts that secure the blades. Before I apply too much torgue, please advise the loosening direction. If I am under the mower looking at the bolt and blade, the blades cut direction is counter clockwise, would the loosen...

Can anyone explain the impact of a Brush Hog's transmission HP on the engine load relative to cutting power? Does high HP mean slower tip speed but more power or does it mean higher tip speed. Which is most likely to load the engine in tall heavy brush? I have a 25 hp tractor with 21.5 to the...

I just bought a used 4wd NH TC25, geared trans, R4's, no mid PTO, w/ Landpride FDR1560 5' rear finish mower. Tractor has 180 hrs on it and I paid $8500.00. It seemed that this was fair pricing but it is difficult to compare as most units I have seen available for sale, included an FEL. Please...