Search results

The Ansung AML334. Ill probably get some 4140 stock and turn my own.

Just looked up a set of pins for my 4025 loader..just pins...$1200 for the set. They've got to be kidding. A set for a Kubota loader is around $250. SMGDH.

They haven't denied your warranty, so..... I spun the ring and pinion in my 4025. Overloaded it. Mahindra warrantied it.

Does anyone know if the replacement cushions for a V5300/KM236 will fit the tractors with the Harita suspension seat? Reubicon says the "may" have a shipment in about 3 months.

Looking at the schematic, it is keyed to the cam.

Next best thing. 30 minutes of work and $5 of Marine vinyl.

Is Mahindra insane? $218.20 for a rubber boot? I can replace the entire POS Besko valve with a Prince for about the same price. SMGDH

Yeah, a bit. I figured the standard numbers were probably right, but was curious is there was something different about this one. I'll just set it up like a normal ring and pinion. It's not like i'm running the indy 500.

Does anyone have preload numbers for the front pinion? Thanks

My son just picked up an Emax 20s and is about to do it's 50hr service. Bought it with 36 hrs. The manual calls for gear oil in one place, and hydraulic fluid in another for the HST. The local dealer said Mahindra rep said gear oil was correct. This sounds wrong to me, but ??? Not...

Had 2 Towmax str's basically come apart in less than 1000 miles on my 20FT tandem. Belt separated. Tire Rack is making me jump through hoops to get these warranted. Anyone else run these and had problems?

Picked up a nice Massey Ferguson 1761 finish mower, but missing the belt. Looked but can't find any info. Does anyone know the belt size or part #? Rough measurement looks like 5/8x155? Maybe 158?

Picked up a 1761 in great shape, but missing the belt. Searched high and low on the inter webs, but can't seem to find the info. Rough measurements looks to be about a 5/8x155? Maybe 158? Anyone know either a size or part #?

Your 2538 is different. Try Bills Tractor. About $8. This is the key to the OPs tractor..

Need a line on where to buy a service manual for my 4025. Or just the front ring/pinion setup instructions, if someone has it. Thanks.

So my second filter to pump line started leaking. Noticed it when doing some post work greasing. Having had enough of it, took the line to my local hydraulic shop and had them cut the flex hose off, and crimp on some stainless braided PTFE line. Yeah, it cost me a bit more, $38 vs $18 plus...

So I'm doing the final clearing on a couple of acres, and needed a landscape rake. I knew Tarter makes most of the three point stuff for TSC, so off I go to the local store to pick one up. Didn't really look at it too well, other than to make sure it wasn't missing any parts. Get out to the...

Coming up on the 100hr mark. Looking for the best place to order filter pack from. Dealer is 75 miles away, so online it is. Troy

Well, looks like the link from the main page is now gone. So goes the hopes that this would be active again. :(:weepy:

This is the shutoff incorperatedwitht he banjo on the tank of my 4025. Thought they all would have one to keep the tank from draing on filer changes.

Added this to my 4025, just add hoses. Much cheaper than the WR Long kit, and has the Scorpion style handle. Construction Attachments Dedicated Third Function Hydraulic Valve Kit, Less Hoses, Up To 14 GPM

Can any of the dealers verify that the 4025 backhoe - ANBH86 is the same as the 4540 backhoe - 4550B? All specs are identical, and the loader was changed from the ML234 to 4550L, so I'm speculating the only thing that changed was the numbering system.

Just dropped the 4025 off for the 50 hr. Completed bill? $500.27 This did not include the hydraulics, which the dealer said isn't changed at 50 hr's. SHNIKIES!!:eek:

My 4025, posed to show a knucklehead, that, yes indeed, the 4025 can "lift itself up".

Scott Equipment has sold out to Progressive Tractor. Progressive won't be dealing Mahindra. So, I now am an hour away from my nearest dealer.:mad: Having a dealer in town was a huge plus. Now I have to try to build a relationship with a dealer who didn't make any money off my initial...

What's different about this one? The price. 72" bucket, 7 Wrap around 230 series shanks, dirt teeth, all new (the plate was from a scrap yard) for under $150. Here's the breakdown and some pics. Got the 3/8 plate as angle from my local scrap yard, 7 ft for $16, cut to 3/8x4x70". The shanks...

Looking to purchase a 5' tiller, but would like the ability to run forward or reverse rotation. Other than the Tarter, who makes one that can be flipped"

4550-4L is in big black letters on one boom arm. That's not the model number. There is a small square sticker that should be on the left boom as you sit on the tractor. It will say ML233/333 or ML234/334. My ML334 loader sits like this when lowered with the bucket level..

Sorry so late...

Can anyone tell me if E007206864B91 is the right part # for the single spool rear kit?