Search results

Results 1 to 14 of 14
  1. T

    Opinions on PHD's

    I'm looking for some insight on post hole diggers, I have a B-26 and was interested in the the Landpride PD-15, but my dealer has a used PD-10 for less than half of what a new 15 sells for ($1015 with a 9" auger, ouch!) I realize the 10 only has a 30" auger, but I will primarily be using...
  2. T

    Solar Hot water

    I know this is for tractor projects, but I used the tractor to lift the solar panels up to the roof! This will provide my family of 4 ; 80% of our domestic hot water. This was a really fun and rewarding project, I had help from a plumber friend, but did most of it myself. So 4 weekends and...
  3. T

    Black Smoke?

    This isn't a serious issue, and it's done it since my B-26 has been new, but when putting my machine under a heavy load, (running the FEL while driving, or any multiple functions) I get black smoke. I keep the air filter clean and replace it regularly, I live at 6000 ft in elevation, is this...
  4. T

    Float Adjustment ?

    Is there ant way to adjust the float position of the loader? I set it in the float position with the plow on, as soon as I drive foward, it takes the weight off the front wheels and I can't steer. It has always had a lot of down pressure in float, but it's really a pain while trying to plow...
  5. T

    Curtis QA Plow with WR LONG valve kit

    Just wanted to post pics of my latest project and say thanks especially to KennyD for pointing me in the right direction, and sharing his wealth of knowledge re hydraulics. I bought a 6' Curtis QA plow setup used for $1500, $90 for new skid shoes and $690 for the WR Long "rocker switch valve...
  6. T

    Need Help with FEL 3rd function

    I recently purchased a 6' Curtis ,quick attach ,Plow for my B-26, I need to add a 3rd function remote for the angling capabilities of the plow. I've done some searches on here, and learned about solenoid divertors and pulling of the rear remote ports, but I'm not sure of the right direction to...
  7. T

    Snow  quick attach snow plow

    Hi all, I'm looking for a quick attach snow plow for my B-26, I've looked at the Curtis, it's a bit pricey. any one else come accross any other plows, with manual shift , I don't want to add a remote valve for a hydraulic shift.
  8. T

    Carbon on air filter

    What typically causes carbon soot to build on the air filter, doing my 50 hr service, the manual mentioned to wash the filter if caked in soot, so I did, but what causes this?
  9. T

    Backhoe  Thumb for B-26 backhoe?

    anyone know where to find a mechanical thumb for the B-26 backhoe? I will check with my dealer, but they really mark up their prices!
  10. T

    Grader, scraper implements ?

    What type of grader implement would you guys reccomend? I need to set finish grade around my house and cut drainage swales and such. I was thinking of a scraper vs a box scraper because it has more side angle adjustment, but I'm looking for a bit of input. I have a B-26
  11. T

    After Market bolt on mirrors ?

    Any know where to find mirrors that can bolt on the ROP upright in an open cab ? I have a B-26
  12. T

    B-26 ; Great Machine!

    New owner of the B-26 TLB, great machine, have about 10 hours on it moving snow, and have yet to be disapointed, a little pricey, but will pay for itself during the summer months on random projects, very happy:D
  13. T

    Snow Plow Suggestions?

    I recently purchased the Kubota B26, the bucket is ok for moving snow piles, but would prefer a plow setup for my road, something with an angle shift capability. My machine is equipped the the skid steer quick connect, what is the best way to proceed? I have just found the curtis model ...
  14. T

    Snow Plow Suggestions?

    sorry for the multiple post
Top