Search results

Just want to let folks know a situation I ran into with my tractor. Nothing bad just a heads up if you have a B7510. Ever sine I had my B7510 I noticed that the power was not that great when moving materail a brush hoging but I just chaulked it up to the 21 HP motor. Well I took it into the...

Wondering if there would be any issue with welding bucket hooks with the loader hooked to the tractor? I figured I would just disconnect the batter terminala and start welding. Anyone have any thoughts on this? I will be using an arc welder. Thanks!

I decided to build a pole barn this year for my tractor :). I staked out and squared up the barn today. That was a pain in the butt doing it by myself! Between my laser, tape measures I got it all squared up :)! Here is what I am building. 30x40x14 Pole Barn Roof Pitch 5/12 with 1' over hang...

I am planing on building a pole barn this spring and was wondering if anyone had experience using a Post Hole Digger with there B7510? My question is can the B7510 handle a 12" auger bit going down 5 feet. I will be drilling through clay :(. Thanks for the help in advance.

Folks, the 50 hour service on a B7510 is way easier than on my previous BX2200. Took maybe 45 minutes and I did not have to take a wheel off. I have to say that Kubota made this tractor much easier to service than my BX. The only thing I did not like is the engine oil filter spins on/off next...

Opening day of bow hunting and 15 minutes in to the hunt I shot this smaller buck in my woods where I keep the brush cleared with my tractor. It is not the biggest buck in town but with a bow you can not be picky when it comes to hunting! Story: After I shot the buck, I walked back to the...

I have been reading alot about a heavy duty top link for the 7510 and 7610. Does anyone know what the part number is? I would like to purchase the HD Top Link becasue I have a 3pt backhoe I want to hook up to my tractor. Thanks for the help in advance.

I am putting rear hydraulics on my tractor and was wondering where I might be able to purchase a 18" steel line so I can bend it and mount it to the tractor for rear hydraulics. I went to TSC but did not see anything. Any help would be appreciated.

I have had my B7510 for over a month and put 12 hours on it and figured it is so cold in NY (nothing to do) I would write up a quick post. Prior to the B7510 I had a BX2200 and there is a difference. 1) Compared side hilling between the 2 machines the 7510 feels much safer than the BX did with...

I have 12-16.5 rear tires on my 7510 and was wondering how many gallons of fluid I will need to fill them up. Thanks for your help in advance.

Question for you 7510 or 7610ers. I want to hook up a rear hydraulic line to run an implement. Need to know where to T the lines into for delivery and return. I see where the loader lines hook into and was wondering if I could just T off these. There are 2 in the front and 1 that comes from...

Just traded in the BX2200 for a B7510 HST and was looking for the site that will give you a copy of the tractor parts listing and numbers in PDF a format. I got the PDF for my BX2200 a while back and can not remember URL. Thanks for your help in advance.

I am looking to upgrade my BX2200, so I am wondering if you folks have any thoughts on pricing on the B7510HST w/loader? I have not tried talked to the dealer yet. Here is what I am thinking. They have both of these on the lot. B7510hst with 302 loader. or B7510 turf special with 302 loader...

I purchased a Consumer Z 18hp mower this spring and figured I would just give some feedback on the mower as there is not much info out here on them. Pros - Gives you a very nice cut. Easy to drive once you become familiar with the joysticks. No problems cutting the grass at full speed. Easy...

Has anyone had the opportunity to replace the front axle oil seal on a BX2200? I am going to attempt this change shortly as mine is leaking. Any help would be greatly appreciated before I start my adventure. PEMAD

I was out doing an oil change and noticed the dealer gave a different filter this time. The filter 70000-74034 is much larger than the one I took off and the rubber gasket is about 1/8 - 1/4 smaller in diameter. Anyone know if this is the correct filter for a BX2200? PEMAD

Started to build a new house and wanted to share some pictures with you folks. Enjoy...PEMAD

I have a leak where one hose joins another. I have tried tightening the two together as much as I can and when the tractor applies a lot of Hydraulic pressure it still leaks. Any suggestion on what I can use to stop the leaky threads?

I went out last weekend and dug up my neighbor’s water line with my Caddigger 608. That thing works nice on a BX2200. The run was about 40 feet and we dug down 5 feet with no problems. It was a mixture of sand and gravel. The only thing I did not like is in order to go deep I needed to clean...

This evening I went out to start my BX2200 and it had a rough time starting at a temp around 55 degrees F. Of Course it was around 34 degrees F this morning. As this will be my first winter with a diesel can I get some input on winter starting? Thanks for your input in advance.

I have read many posts on why NOT to put a backhoe on the BX2200 but I want one! I can't justify spending $7000.00+ to trade up to a BX22 for a backhoe. Especially when I am going to use it around the house for little things. So I am looking into purchasing the PUMA 6' backhoe. My question...

was cleaning my BX2200 and noticed that my Bracket that holds the Air Filter in place broke where it bolts to the engine. The bracket does not look like it was made that well as it is just a strap made of tin. Anyone else have this problem?

I figured I would pass this on to others that may come across the same problem. I went to start my BX the other day and did the normal procedure of putting the tractor in neutral and turning the key but nothing happened. The tractor did not turn over but just made the normal clicking noise. I...

Attached is a picture of my first project with my BX2200. I cut in a 10' x 420' path for my new driveway. We are building a new house and I figured I would buy a tractor and do some of the work at my leisure. Yes, it took me about 15 hours to cut in the driveway with this machine but it was...

I was just wondering if this is a decent price for run-a-crush/Driveway mix. I am getting a 25 ton load for $190.00 delivered 20 miles from the corey . Thanks for your reply in advance.

Okay I have a question as a newbe tractor owner. I ran over a nail and punctured my front tire on my BX2200 this weekend :-( . I have a FEL on it and was wondering if I should have the tire guy plug the tire or should I plug it and put a tube in it? Thanks for you help.

King Kutter 5\' Box Blade and BX2200 Anyone know if a BX2200 can handle the King Kutter 5' Box Blade? The Kubota site shows a 4' in the implements list.

Howdy! I finally did it and bought a used BX2200 with 186 hours on it. It came with a FEL and what a joy that is! No more back pain! I paid $8500.00 for the machine and loader. I am in the process of building a new house and used the loader to move a pile of rocks and started to cut in...