Search results

I have a JD820 tractor that I am somewhat restoring. The motor is rebuilt and I haev started it. The problem: The fuel injection pump (Roosa MAster Model CBC331-4AL) leaks where the governor goes into the pump. The parts (JD) diagram for this shows one o-ring where the governor goes into the...

Have: 1970 vintage JD 820 utility tractor Problem: Spun a connecting rod bearing Damage to the crankshaft and cylinder 1 connecting rod. I believe everything else is ok but just needs cleaning. I can remove the motor and rebuild it. Questions: Can the crankshaft and the connecting rod be ground...

I have had a DK35 and now a DK45. Both have had the maint. type battery mounted in front of the radiator. Both of these have discharged battery acid/water out through the battery overflow which in turn runs down on the metal below. VERY bad for the paint and it is causing the metal to rust...

Closeup of side

Another picture...front

Found this old rusted plow on my brother's farm. Sand blasted and painted it. Made the quick attach bracket. $100 invested. Of course it hasn't snowed here since completed! Pull the pin to manually adjust angle left or right. I do seem to have a problem though, maybe someone can suggest a...

I have a KingKutter 5ft brush and a friend borrowed, put a VERY hard shear bolt in, and twisted the Ujoint, yoke (unrepairable). KK says $40 for Ujoint and $45 for the yoke. Both those prices seem extremely high to me. Anyone found somewhere else to buy parts for these? Thanks, Dave

I have a DK35 w/FEL (KL1450), tooth bar, and a brush guard. I am going to upgrade to a DK45. Do you think $15,300 is a reasonable asking price? It is 8 months old and has 122 hours, and really is in like new condition. Thanks for any input! Dave

I am not into hiring out to do work with my tractor....prefer to use it more for playing and not having commitments to people about needing to be somewhere at a particular time etc. However I did tell someone I would mow their fields. ALOT of field...maybe 50 acres and I only have a 5ft brush...

I have my first tractor. We anticipate snow. None of my neighbors (I live in a rural area) have any means for removing snow from their driveways. I am trying to think how to respond if my neighbors/friends request I plow their driveways. My thought is to do it for free (the neighborly thing to...

Well decided to grease my KL1450 FEL. I figured a ten minute job.....connect the grease gun, squirt each fitting 3-4 times and I'd be good for another 20 hours. A hour later and frustrated I am done! What in the world are these "pushed in" not even "pressed in" fittings? This is cheap! In some...

Curious, do you all lubricate the swivel balls on the lift arms and the middle 3PT hitch arm? Seems they should be but how, with what? Thought about WD40 however grease would be a better choice but suggestions on how to get it in there?

Have a DK35 with the LK1450 FEL. I guess I was thinking it would be possible to lift the front of the tractor off the ground with the loader. Not the case......normal? I suppose considering the lift capacity is around 1300lbs and the tractor is 3500lbs+ it would make sense to not be able to do this.

I am a new tractor owner, this is my first (DK35). Having access to this site and all you experts is great! I appreciate you "expert/experienced" tractor owers response/advice. And as us Kioti owners know, we have great tractors but the manual is to say the least lacking!!! The draft control...

I have only had my Dk35 for a few days. I was just looking around and noticed the 4 bolts (2 left/2 right) for the battery tray and the 2 treaded robs for the battery lock-down were very rusted. My thought is something (possibly coolant) is getting down to this area and has caused this premature...

Just got home with the new DK35.....this is too awesome and sooo late I cannot use it tonight! Anyway I want to thank you all helping me decide Kioti was the way to go...great price and features. Have not tried to decipher the manual yet. Great to know there is a place like this to come for...

I will likely be purchasing a Kioti DK35 within the next few days. The dealer advises "loading" the tires (I guess this is water and antifreeze), especially with a FEL. He said he would do this at no additional cost. is this a good idea? Are there any negatives to having this done? Is it...

Just spent about 1.5 hours looking at a DK35.....seems VERY nice for a person that REALLY wants a tractor (well maybe a toy, but can't let the wife know that!), and that is on a rather tight budget. Any opinions on this would be greatly appreciated because I would like to purchase in the next...

Tractor JD 820, Bush Hog (I believe) Howse Problem: Where the upper arm of the 3PH connects to the Bush Hog it is slotted rather than a single hole. When the implement is raised the PTO shaft to BH hits the top of the Bush Hog. This in turn puts most if not all of the BH weight on the tractor...

I have a friend that was given a JD 820 2wd tractor (by his grandmother). Anyone have any info on this? Years made, HP, weight, etc? Seems to be a real workhorse...very heavy. Thanks Dave

1. Mahindra 3510 4wd, 35hp Daedong 3cyl, FEL, 12F/12R, Industiral tires, PTO 540/1000, weight 3800 lbs. $18,000 2. Longagri 360 DTC 4wd, 38 hp Mitsubishi 4cyl, FEL. 12F/12R, Indust tires, 540 PTO, 3100 lbs $18,000 3. 300 DTC Same as the 360 DTC but 30 hp. $16,600 Don't these prices seem a bit...

I am looking at the Long 360 DTC and a Mahindra 3510 both with FEL Mahindra 6' bucket Long 5' Both are priced $18,000....good, bad, neutral??? Thanks, Dave