Search results

I've just spent 3 hours looking for a screen for my 10" standpipe overflow for my pond and came up empty. I found it last year but cannot find it now. What I found and liked best was a yellow (does not have to be yellow, just what I saw) plastic cap that had 8 or 10 vertical plastic rods to keep...

I have 2 sets of rear remotes that at times move the implement too fast. I'm guessing I can put some kind of restrictor valve inline to slow the hydraulic fluid. I would put a male QC at one end and a female at the other so I could remove the short piece of hose so I could have full pressure for...

I've read a bunch of these threads but have not found what I was looking for so.... Is there a reason you cannot cut the hand crank rod shorter and mount a hydraulic motor to it to turn the worm gear that is already attached to the chute?

Anyone know of a way to inexpensively (relatively) to add hydraulic chute rotate and or hydraulic deflector to a NH 716C snowblower. I already have extra rear remotes.

I just bought a used 1995 New Holland 716C snowblower in great shape. It had been sitting in a shed for the past 5 years and has very little use. It has a little surface rust. Any idea of what I should do to it before putting it to some good use? I do not have the instruction manual, so have no...

I've got a TC34DA with Skid Steer QA and want to put a snow plow on it. I have extra hydraulics on it from my grapple so I can get hydraulic angle on it. I would prefer to mount the plow on the loader arms. I found a used 7.5 foot locally for it with the required Skid Steer QA for $1500. Would...

Anyone else having problems with the right side hoses on the stabilizer bar getting hung and crimping when lowering the stabilizer. I already have replaced both hoses, pulled the cloth back, zip tied the cloth, added a cut piece of plastic pipe so the hose would ride smoother all to no avail. It...

How would you go about taking down this tree? My first thought is to go in and take down the maple it is leaning on. I'd make a small cut underneath it and then cut from the top. You can get a good idea of the maple I'm talking about in shot #7. I'd cut the vertical part of the maple first and...

I'm thinking about stacking firewood on pallets so I can keep them covered outside and when i run out of firewood I can just drive over to the wood pile and simply bring another pallet into my garage. Any idea where I could get either 2 or 3 sided pallets?

Which backhoe do you guys recommend for a TC34DA, the 757, 758, or 759? My dealer says they usually put the 757 (the new 920BH I think). Sound right or should I be looking at the next size up, the 758?

I have chains for my 34DA with turf tires. The 3pt hitch side arms rub the chains. The chains are on good and tight and I've put them on 2x already to make sure it was not me. How would I go about getting the tires further out. I probably could get by with 1/2 inch on both sides.

I've got a TC34DA and will be running rear chains on it in the winter. Do I need to protect my concrete floors with rubber mats or can I just drive over it with the chains on without any damage. If I need to protect the floor, what would you recommend using?

I'm about to get my GradeMaster delivered and need to build up my road. I need to add a total of 6 inches to it. I have a 700' driveway with a fairly steep pitch. With using the GradeMaster do you feel I should build up the road with gravel alone, gravel underneath and then Stamatte, or just...

I'm in the market for a new tractor for 3.5 relatively steep rolling hillside acres. (Steep enough to be able to make a luge run with multiple turn 6'+ banked walls for the kids in the winter!!!) I need to mow around 2.5 acres and it is getting a bit monotonous mowing it with a small Cub Cadet...

I live in Vermont and need a tractor for the following: Snowblowing a 700 foot driveway. I've already decided on a front ($) mounted blower. Grading driveway with a box blade once snow is gone. My driveway is VERY firm with a compressible product like staymat. A York rake doesn't have a chance...