Search results

I have a 25 gallon sprayer with an electric pump, which has always worked flawlessly. Over the weekend I spent 3 hours trying to get it working with no luck. I first tried getting power from the wires under the seat of my BX, but had no luck there. I then clipped the wires directly to the...

I know this subject has been covered many times, and it usually comes down to Kubota labeled paint and Chevy Engine Orange. I just wanted to give a heads up to anyone looking. I picked up a gallon of Majic brand farm implement paint in Kubota Orange at Rural King over the weekend for $16.99...

Has anyone disced with a BX? I'm considering buying a 45" 3 pt. lift tandem disc to use for food plots, but want to make sure the BX will be able to lift it and pull it. It looks like the disc may be a little too tall for the short BX, so I would first lower the pins before doing anything...

My dad has a 455 garden tractor and a 445 rotary tiller (54" pto driven). I have a Kubota BX2200 and am hoping to find a pto adapter that will let me hook up the pto shaft to my tractor. My tractor has a regular male end on the tractor, while the tiller's pto shaft also has a male end. My...

My dad has a 455 garden tractor and a 445 rotary tiller (54" pto driven). I have a Kubota BX2200 and am hoping to find a pto adapter that will let me hook up the pto shaft to my tractor. My tractor has a regular male end on the tractor, while the tiller's pto shaft also has a male end. My...

My dad has a 455 garden tractor and a 445 rotary tiller (54" pto driven). I have a Kubota BX2200 and am hoping to find a pto adapter that will let me hook up the pto shaft to my tractor. My tractor has a regular male end on the tractor, while the tiller's pto shaft also has a male end. My...

This has undoubtedly been asked in the past but I could not find it. I have several partial containers of Delvac 1300 dino oil and Rotella synthetic. Is it ok to mix an dino oil and a synthetic, or is it a no-no?

I have areas of my yard that need to be tilled and reseeded, and there's not a flat spot to be found. Most areas aren't bad, but the one that concerns me most is the banks around my pond. My question is, if I can safely mow the spot across the slope with a MMM, can I safely till across the...

I just returned from closing the deal on trading my 1986 B9200 for a 2002 BX2200. I test drove the BX Saturday at home and was very happy with how much nicer it mows than the 9200. All I can say is power steering kicks butt. It's in great shape for 3 years old....only 152 hours when they...

Dad had the tiller (set up to run behind his JD 455, cat. 0). I'm trying to work a deal to trade for the BX2200 (cat. 1). The 3 pt frame on the tiller will hitch up to the BX fine, the problem lies in the pto. On the BX as on most other tractors, the "male" part of the pto is on the tractor...

This may have been posted before but I couldn't remember seeing it. Since the B7800 and B2910 are the same tractor except for a few nicey nice features, what keeps a person from buying the B7800 and adding the upgraded B2910 seat and 3ph extendable lift arms? Has anyone looked into this? How...

I borrowed some ideas from some of the projects I've seen on this site and tweaked them to fit my needs. I made a hitch receiver for the 3ph that I can use to move trailers. Tractor side view picture attached.

I spoke with a dealer this morning about a new TC33DA with supersteer, 15LA FEL, and 72" MMM. He shot me a price of $23,650 straight out. I know pricing is regional but what do you think?

Please diagnose my Kubota problems. Last week I installed 4 new glow plugs in my B9200 and blew out the air filter. When I tried to mow Saturday it didn't run right from the start. It smoked much more than normal, ran rougher than normal, and lost power easily. My guess is that while moving...

I was at my local dealer yesterday picking up a new regulator for my B9200 so while there I decided to kick the tires of what he had on the lot. It's been a while since I've done it and it was neat to see what he had there. Boy, when I win the lottery I'm need to get me one of those L5030 cab...

This is just too obvious. I also think I've seen pictures of this home-made grapple here at TBN before. Is someone using pictures of one of our member's tractors? Ebay link

....and can't stop drooling. Comparing the 3720 to my B9200 is like apples to oranges, but wow what a difference. My old Kub only has half the horsepower, and no power steering, so those differences alone made the JD feel like a Cadilac. Not to mention the suspension on the seat (not...

Forgive my ignorance on this topic. I've read in various posts here that the B3030 does not have a foot clutch, but instead has a had operated electric or hydraulic (can't remember which) clutch. Henro has voiced concerns about operating a PHD with this type clutch, and I agree with him...

I finally found a little time to set up the rotary cutter I bought a couple of weeks ago. Shipped without gear oil. Remove the check plug....oil runs out, ok what the heck. I guess I don't need gear oil after all. Bolt the arm braces to the deck. Piece of cake. Attach the pto shaft...

Does anyone have any experience with these? They have changed the design and the units I saw on the lot don't match what they show on their website. The new units look very similar to a Land Pride cutter, except the WS has a 40 hp gearbox vs. a 50 hp on the LP. The decks looked very similar...

Thinking about buying a subsoiler or middle buster, maybe even the KK combo. In noncompacted soil that is not heavy clay, will a subsoiler need weight to get to max depth or will it draw itself downward? I'm looking to break up ground that has not been worked in close to 20 years, breaking up...

In pricing cutters at local dealers I was quoted about $100 cheaper for a 60" Land Pride than for a 60" Woods. I have no experience with Land Pride but I do with the Woods. I've always thought very highly of the Woods and from what I'd read I assumed that Land Pride was on the same level...

I'm considering buying a set of gauge wheels then fabbing brackets so that I can swap them between my KK rear blade, my Wallace box blade, and a possible future landscape rake. (inspired by Henro and others) Where is the best place to buy a quality set of gauge wheels? Do any of the site's...

Do any members own the 4400 or can anyone comment on its reliability. There is one listed on eBay here that seems like a great deal, and being in the next state it wouldn't be out of the question to pull a trailer over there to pick it up. What's your opinion on the value of this tractor (2001...

I planned to talk to my tax man about this but figured it would be cheaper to ask here. With the combined experience of the board it's likely someone knows. I plan to upgrade tractors in a few years to a new CUT with MMM and FEL. I'll already have a rear blade, box blade, rotary cutter and...

I see crews that seed new lawns using pulverizers quite a bit. What is the advantage of the pulverizer over a tiller? Is it because of the rollers behind the pulverizer? Do these give a firmer seed bed and delete the need to run a cultipacker? From what I've seen, the pulverizer is almost...

Hi all, I've been wanting to get a rear blade for clearing the very infrequent snowfalls from my driveway and was about ready to buy a 6' Wallace from Rural King. For snow and some gravel grading I figured it didn't need to be real heavy duty and the price was right ($170). After doing more...

I was in the "big city" over the weekend and stopped by TSC to price the 60" King Kutter rotary cutter. The price didn't seem out of line for a piece of equipment that several people on here have stated does an adequate job. Being one that likes to save pennies when possible, my question is...

Does anyone know of a dealer within an hour or so of southwest IN that sells and installs these. Considering one for the B9200 but I have not received a response from Koyker. Thanks.

No Till Drills for CUT\'s? Does anyone know if there are no-till drills available that are small enough to be pulled by a small CUT? I'm looking for something in the 6' to 8' range that could be pulled by a small CUT ranging from 20 to 30 hp and could plant the seed up to 2" deep. Only other...

Does Case IH offer super-steer on the Farmalls like is offered on the Boomers? Thanks.

Does anyone have a 72\" rear discharge MMM? Looking at upgrading my tractor one of these days and the TC33DA is on top of the list. I'd like the convenience of the 72" rear discharge MMM because it would make it much easier to trim around my numerous trees and other landscaping, and I could...

Does anyone have one of these. I'll have to do some digging and see how much one of these babies cost. It not only looks like a great tool for preparing a lawn for seeding (its intended purpose) but also for prepping a seedbed for clover plots.

I've had my Honda Rubicon since March 2001. It only has 860 miles on it, but 260 hours. That's a lot of hours for the miles, but that's because I use it a lot for working in the yard pulling a trailer, running my seeder and sprayer, etc. I have a pic of the sprayer setup but unfortunately...

Does anyone have experience with attachments sold under the Wallace Mfg. name? I have a 5' box blade that works pretty well for my little 22 hp Kubota B9200. My local Rural King sells a lot of the Wallace stuff....rotary cutters, straight blades, disks, tillers, you name it. Just wanting an...

Does anyone have suggestions about places to look to find one for sale? I know it will be difficult. I've checked eBay with no luck, but will keep my eyes open. Are there other places that may have one of these for sale? I'm hoping to find a reasonable deal. I can't afford much, but this...

What a sickening feeling. I bushhogged about 5 acres Saturday with my B9200 and a Woods BB48. It did awesome. After I finished I discovered that a lot of fescue had been wrapped around the mid pto. My mid pto doesn't have a cover, so I'm assuming it was lost by the previous owner. I removed...

It's not much, but I'm excited anyway. I bought a 5 foot box blade made by Wallace Mfg. on Saturday for $269. I know it's not the heaviest built out there, doesn't have the nicest paint, but I think it will do the job for my little 22 hp. When the red paint fades off (which won't take long) I...

After impatiently waiting for the yard to be dry enough and the grass to be tall enough, I was able to mow with the B9200 for the first time this week. I've been mowing 3.5 to 4 acres with a Toro 16 hp, 38" deck for the last 3 years. Moving to the 22 hp diesel, 60" deck was quite a change. I...

I had a local garage fill the rear tires of my Kubota with used antifreeze yesterday. I assumed he would fill to the 12:00 valve stem position, but later found out he filled them completely full. Is this going to cause a problem? Will it decrease the stability on side-hills? Thanks.

The B9200 I recently bought is in pretty good shape for a tractor that is 17 years old. One thing that is unsightly on it though is the front grill. The outside frame of the grill is plastic, and it has cracked with age. I've thought about seeing what it would cost to have the frame...

Hi. I'm new to the board and have a few quick questions. I'm looking at possibly buying an '86 Kubota B9200 with 60" mower deck. Has anyone on here owned this model before? I've heard good things about it, can you give me any pros or cons? It has fairly low (670) hours and seems to have...