Search results

Additional details: -Purchased new in 2020 -Has never been worked -- no 3 point attachments. no use of the loader. -Garage kept since delivery -Fewer than 50 hours -Driven 3 or 4 times per year around our flat 53 acre farm fields. -no additional options, just the complete standard 4225h factory...

I have a very low hour 4225h that I’m considering selling. Any opinions on a ballpark value?

Hello All, So any TYM / Branson merger thoughts over the past almost 2 years?

Will my 4225h be able to handle the 900 lb. WEIGHT of an 84" Offset Rotary Cutter? (FYI the tractor CAN deliver the cutter's 35hp minimum suggested PTO power)

I have a new Branson 4225h. I'm just starting to use it and believe it would be wise to install a FEL cutting edge. I want a good quality cutting edge. I've not yet spoken with my dealer about this. - Does Branson sell cutting edges specific to their line of tractors? If yes, any...

Hello, I have a new 4225h. I've not moved it since it was delivered. I'm getting ready to use it for the very first time. (Brush Hogging) Today I pulled it out of the pole barn. It felt like the brakes were on. Of course with throttle I was able to overcome what seems like some...

Does a Ford New Holland 3930 have a fuel shut-off valve of some sort? If yes, where will I find it< Thanks.

I have a CT230. Used it a week ago. Everything fine. Today, turned key to "glow plug" on position. Dash lights normal. When glow plug light went off, faint buzzing sound, NO Starter turn over. With ignition switch OFF, if I turn on four way flashers, no lights BUT buzzing noise pulses at...

What makes a Branson Tractor a better buy than competing brands? * Heavier duty weight / construction? * Powertrain simplicity? * Reasonable, (not low), pricing? I'm sitting here trying to better understand just what has caused me to be so focused on seriously considering the purchase of a...

I'm very close on a Branson 4225h buy. Just read the warranty. Not covered: Engine fuel injection system pump, injectors, fuel lines. Are the above components likely bullet-proof and I need not worry about this lack of coverage? Also, the Branson Emissions Warranty appears to be only 2...

When a retail tractor/equipment dealer decides to stop selling new tractors, are there deals to be had? Does a manufacturer offer the dealer some financial incentives to clear the in- stock inventory?

Hello, Kicking around the idea of a new Branson purchase. * 4225h with 200 series FEL * Cash purchase * No trade * No options What are some of the best prices / quotes you are aware of? ( Tax NOT included.)

Hello, Can the REAR R1 tires/wheels be spread a few inches wider on a Branson 4225H? Via wheel adjustment, NOT using spacers? Thanks.

Hello, Does the Branson Tractor, free FEL program apply to ALL new Bransons? Including eligible new 2017 and 2018 model years? Does the FEL discount go directly to the buyer as a Rebate, or does it go to the dealer? Could the dealer just remain silent and therefore HONESTLY pocket the FREE...

Hello, Is the Branson Tractor, free FEL program something new or is it always going on? Does it apply to all new tractors be they 2019, 2018, 2017 model years? Does the FEL discount go directly to the buyer as a rebate, or does it go to the dealer? Could the dealer just remain silent and...

I'm thinking hard on a new tractor. I've stumbled upon a model I like at an area dealer. I've been told that the machine has been in stock for about 22 months. Looks good. Some expected minor aging to a few painted portions and plastichrome grille. 4.9 hours on machine. What opinions on...

I'm considering a Branson 4225h tractor. I'm told it is a model year 2017 machine. I'm also told the more recently built 4225h machines have a new and improved "soot cooker" emission system. Perhaps with more platinum? This change, if true, was to address tractor performance problems in the...

Hello, I'm led to understand that diesel tractor emission warranty terms vary by state. On a NEW tractor, would anyone know what emission warranty law is in place in New York State? Thanks.

I need a new battery for my 2516. Today I'm trying to figure out how to access the battery "compartment". I don't find any help in the tractor's manual. Do I need to remove the grille and headlights? I see a couple of wing nuts under the hood at the front -- do I just loosen those and...

I have a New Holland TC26da. A fellow I know has a New Holland front snow / dozer blade set-up he used on a TC24da. He will sell it to me IF it will fit my TC26da. The owner's manual for the sub frame lists several small New Holland models including the TC24da. No mention of the TC26da...

I've got the tractor bug bad. Not long ago I "discovered" the Branson brand of compact tractors. A local lawn mower shop started to handle the line earlier this year. Driving by their shop it appeared that their original stocking inventory never changed. Eventually, one or two machines sold...

Hello, Subject: Mahindra 2516, HST, with Mahindra FEL. No additional attachments. - About 135 Hours - R4 Tires - Nice shape. - $9500 firm selling price. Your quick opinion on pricing please. Thanks very much.

I have the tractor bug bad. This week we are going to add another tractor to our household. 90% of the time the tractor will be used by my wife to brush hog and/or finish mow about 5 acres of flat field that adjoins our home. A FEL is NOT a key part of our need as we already have a Bobcat...

Can a NEW LS 2023h be purchased without an FEL? Tractor only? Has anyone done this? If yes, what price range please. Thanks.

OK, I'm giving serious thought to buying a small tractor to use to finish mow a 5 - 7 acre lawn (wide open, flat RECLAIMED farm field.) This would be a dedicated mowing machine. (3 point, five foot finish mower we already own) My finalists: - 2006 New Holland TC26da. 68 hours. Nice...

How hard is it to remove the loader from a CT230? Next summer my tractor may be placed in brush hog mode to groom 5 - 7 acres every couple of weeks. I don't want the loader on the machine when I'm doing this field work. Is dismounting and then later remounting the loader system really quick...

I recently learned of a used LS J2020h tractor for sale from my out of state cousin. I'm considering buying it. Recently I looked at an LS J2023h (new at a local dealer). Are these two tractors the same physical size? I'm very tall and I felt the J2023h could work but I wouldn't want...

I've been looking for a used compact tractor to take over 7 acres of field mowing from our Massey 135. In a general sense, is there a certain percentage discount (off new pricing) that a low hour really nice machine should come in at? In other words, if something brand new is in the $18,000...

I'm giving serious thought to purchasing a clean, 135 hour, TC26da. This tractor would be dedicated to 7 acre field mowing by my wife. Question #1: The seller mentioned that if he brush hogs too much too quickly the machine will sometimes blow a fuse which STOPS the brush hog only. Is this a...

Were ALL New Holland TC26DA tractors built with Sensi Track four wheel drive? Did they build any TC26DA models that were just two wheel drive?

My cousin is looking at a used Branson 2910i in Ohio. He's asked my advice. I don't know Branson tractors though I see one now and then. Given this model's terrible reputation for hard winter starting, should my cousin consider this a warm weather only "back-up" tractor? Has anyone been able...

A Yanmar 187D is posted on Craigslist Scranton. FYI (Too far away for me) UPDATE: It sold already! Listed at $3,500. One owner. 900 plus original hours. Ag tires. No ROPS. Photos presented tractor in VERY nice condition.

I have available a small diesel tractor with a 5 foot finish mower. The tractor has Turf Tires. I want to start mowing a 4 acre field as a LAWN. The field is very flat and smooth. No ruts, no rocks, just field grass. It has always been cut with a brush hog but I want to move to a groomed...

I'm considering a Yanmar ym187D. With powershift. Approx. 900 hours. I know almost nothing about this model. I'd be using it to finish mow a 5 acre field. What are the things specific to this model that you would recommend to check or test? Thanks.

My cousin from Ohio is offering me a older Yanmar tractor for sale. He tells me it dates to the late 1980's and that he bought it used about 10 years ago. When I asked about the hour meter reading he said he always believed that the now 990 hours are accurate. However, in looking through...

I'm been giving very casual thought to picking-up a small second used tractor to use strictly for easy brush hog work on 8 acres about 30 miles from home. Yesterday I happened to stumble upon a VERY used Bobcat CT230. About 1,000 hours of use. NO LOADER. BALD front turf tires. NO drawbar...

When it comes to tandem trailers I know nothing. Maybe I'm ready to take the plunge. I've found two used trailers that have been well cared for. One is a 16' car hauler split 14' flat and 2' DOVE TAIL with fold down ladder ramps. The second unit is 16' FLAT with 5' SLIDE -Out ramps. I'm...

In our small sunflower growing business we have used Bobcat CT230 and CT235 tractors. Our business is expanding and we are now thinking about adding another tractor. The positive comments about LS tractors and their affordability have gotten my attention. Am I correct that the "G" series LS...

I've happened upon a nice used New Holland TC33 tractor that never had a loader installed. (This tractor would be a field mower. I already have another tractor with loader) My question: How much does the lack of a loader reduce the value of a modern used CUT? In other words, if this tractor...

New, tractor dealer inventory changes at a glacial pace in my area. As I go about my daily work I pass several small, CUT, tractor dealers and I'm amazed at how long dealer inventory stays the same. One local dealer started selling Branson in May. Of the 8 original inventory machines only...

I have a sixteen foot "Top Brand" painted steel trailer that I use a couple of times per year to move my 30hp tractors short distances. My trailer is in good shape with dual axle brakes that work well. However, I have an itch to consider a new trailer -- perhaps aluminum. Perhaps a Eighteen...

I'm using a Yanmar tractor. I've come to like the machine and I'm thinking of buying it. The tractor comes with R4 tires but the seller is offering, at extra cost, a set of Turf tires. Should I buy the extra set? Price $650. Almost no use. My tractor use is field mowing and occasional...

I know someone who might sell their Bobcat CT120. Are any of you using this model or the similar CT122 as a Lawn Mower with a belly mower? We currently cut our 2 1/2 acre lawn with a Toro Wheel Horse 522xi tractor/mower. My wife is very fond of the Wheel Horse and will not consider a zero...

I'm using a Yanmar tractor, about 30hp. HST. I want to buy a set of pallet forks. I did a search on "sizing pallet forks" , got a lot of good general information but haven't found specifics on sizing. I understand that forks too heavy or too long will reduce the weight of what I can lift...

I need to buy a ballast box. My owner's manual states I need 800lbs. My neighbor has a home made ballast barrel. He tells me it weighs about 1100 lbs. Would this be too much weight? Can the tractor be damaged by an overweight ballast box? I'm using a Yanmar 3200 tractor. Thanks.

I'm just curious, have most Bobcat dealers now sold out of New CT inventory? Are used units taking a price hit that some folks predicted? Have prices stabilized? Are there any deals on new tractors still to be had? Thanks.

I'm searching for the best built 5' Rotary Cutter model available here in North America. I want old fashion, simple, high quality construction. Built to a HIGH standard not to a low price. What do you suggest? If you think there is more than one brand worthy of consideration please share...

I'm searching for a GOOD quality 5' rotary cutter. I'm looking for the best value, not cheap and not overpriced. I do want good, durable quality. I've stumbled upon a 5' Walco Whistler from a tiny dealer in the area. It is a new one. $1390 best price plus tax. 10 gauge steel. I can't...

While considering the purchase of a new TC40DA my wife and I also looked at the T1520. A nice little tractor. My wife really likes it and would be much more comfortable operating this machine. It would meet our needs. I did some internet research and came across a website that shares...

A fine, local New Holland dealer has a new TC40DA tractor with a matching 72" loader. I'm paying cash, I have no trade. What would be an exceptional yet realistic price for this machine?

I'm buying a tractor. Looking new and used. Uses: Finish mowing 4-5 acres; pushing back snow banks with loader along a 500' driveway; possibly planting 5 acres of sunflowers. I've found a 2005 JD 4410 with 72" WOODS 3 pt. finish mower, 72" 430 loader, ehydro, mid-mount PTO, block heater...