Search results

My fan / alternator belt came apart today. It's not obvious to me how to remove / replace the belt. Does it require removing the radiator and fan? Or does it somehow slip between the fan and fan cowling? I see the part number for the belt is 301525A1. Does anyone have a cross reference to...

I'm removing a heating oil tank from my house. It's in great shape and would make a good diesel tank. I'd like to get rid of it and will sell it for a very good price to a fellow TBN member. PM me if you are interested.

I'm looking for the repair manuals (shop manuals) for a TC33D. Does anyone know the NH part number? Or, are there after market manuals that are good. Thanks.

The 600 hour service calls for replacing the power steering filter (part# SBA360101470) which is by far the most expensive filter on the tractor. Messick's wants $76.89. I'm having a hard time spending this much for a filter. How important is this filter change? Are there other brands I...

What's the smallest tractor and loader I can get where the loader has a removable bucket (so I can easily change to pallet forks)? I'm looking at a 1030 with a 210TL loader, or a 2030 with a 240TL.

My father has a B1550. For years now the brakes lock-up has soon as you step on the brake pedal. Basically, the brakes are either fully on or fully off. Any idea where to start on this?

My father has a B1550. For years now the brakes lock-up has soon as you step on the brake pedal. Basically, the brakes are either fully on or fully off. Any idea where to start on this?

I have a Woods 7500 BH that I use maybe a few times a year. I went to hook it up the other day and noticed a rust spot, maybe 1/3 the size of a dime, on the shiny part of a stabilizer hydraulic ram. I carefully sanded the spot with 320 and then 600 grit sandpaper until it was as smooth as I...

I've had this tractor a few years now, but almost every time I hook up an implement I have to wrestle with the PTO connection. I understand the splines have to engage properly when connecting the coupling to the PTO shaft, but once that is done shouldn't the connector slide in smoothly until it...

I need to pull a bunch of brush out of the ground. A while back I saw someone with a cable and slider for this purpose. You could walk the cable around the brush and attach it back to itself with the slider. The other end of cable had a small loop to hook it to your tractor. The cable would...

Recently I've blown a number of fuses while trying to start my tractor. I'm blowing the 10 amp fuse. I believe that I would blow the 30 amp fuse if I continue to hold the key in the start position. I recall reading here to replace the fuse with a circuit breaker and the thread listed the part...

A few chipper questions.... Has anyone used a Woods TCH4500 chipper before? Estate Chippers by Woods Equipment Company What other brands should I look at? I've got a 33 hp tractor. Can I purchase one online and have it delivered?

My B1550 has not been starting as well as it used to. It starts, but it takes more cranking than it used to. I still get a little puff of black some as it comes to life. My understanding is that a bad glow plug would result in white smoke (unburned fuel) at startup. Am I wrong on that? I've...

I found the newspaper at the end of my driveway under 17 inches of snow. Unfortunately I sheared of my shear pin on my Woods SS74 snow blower doing so. I put a bolt in there for a temporary fix, but I wanted to know the correct size and strength bolt that should be in there. This is the one...

Who sells Power Service? The know Tractor Supply Company sells it, but they are a 40 minute drive for me. Who else carries it? Are there online sources?

I blew out my #5 fuse again (the safety interlock circuit). I've been through this before, and I have one of the incorrect owners manuals which says #5 should 7.5 amp. I have a 10 amp fuse in there as it should be, however when I went to start the tractor today I got nothing. I went right to...

I'm not sure if I'm finding all the lubrication points on my tractor or not. I've got one lube point list under my hood, one on page 3-2, 3-3, and 3-4 of my operator manual. Each of these four lists are similar and contain some of the same points, but they are not the same. I really wish...

Does anyone make a loader for the B1550? Any brand and price information would also be appreciated. Info. on a quick change bucket and forks would be even better. Thanks....

My father has a B1550. Can this tractor handle a rotary cutter (bushhog)? If so what size? Thanks...

I've got the issue with my TC33D where the glow plugs come on at random times. I've already replaced my ignition switch. I went to my dealer and asked for a glow plug timer module. They sold me a relay, but I don't think it's the timer. Can anyone tell me the part number for the timer?

My father has a B1550. For years now the brakes lock-up has soon as you step on the brake pedal. Basically the brakes are either fully on or fully off. He took it to the dealer years ago - they charged him $500 and didn't fix the problem. He's not the type to take it back until the get it...

I was driving along and suddenly I heard the start motor engage for a fraction of a second, then the whole tractor quit. Fuse number 5 (10 amp) was blown. Previously I’ve had my glow plugs come on briefly at odd times, and now the starter. (I don’t use the key with the rubber cover on it.)...

I recently installed a 275 gallon diesel tank next to my barn. I have my tractor, a car, and a truck that run on diesel. My question is how long will the diesel remain in good condition? My tank was red when I got it, but painted it light grey (same as my barn) based on the advice of the fuel...

I’ve accumulated a number of implements – backhoe, tiller, auger, grader blade, rotary mower, snow blower, FEL with bucket, and pallet forks. (What good is a tractor without them?) Anyway, I’ve been thinking of trying to start a small business. I’d need to get a trailer, but I have a ¾ ton...

My tractor wheels are 5 feet wide. Should I get the 6 foot wide blade or the 7 foot wide model? I'll be using it to maintain my gravel driveway - keeping a crown, etc. Also I want to use it for lawn repairs.

While trying to avoid a disaster I created one. I had replaced the cracked oil cooler hoses on my TC33D, did a quick leak check, and then I was off to blow snow. When I was nearly done I started to notice oil drops in my track. Oppps. I realize I did the leak check at idle - no leaks...

I'd like to buy a trailer for my TC33D but I can't seem to find the weight info. in the operator manual or on the NH web site. I've got a TC33D will CaCl filled rears, a 7308 loader, and a Woods 7500 BH. Can anyone tell me what this rig or any part of weighs?

My glow plugs seems to be turning on at random times while I'm driving my tractor. Does anyone know the fix for this? Thanks...

I just did my 300 hour service on my TC33D. The manual says the tractor will take about 8.8 gallons of hydraulic fluid if it's a hydrostatic transmission. I checked the fluid level after adding about 7.5 gallons and it was already overfilled. I ran it a bit and worked the 3 point hitch and...

60\" HD Bucket for a 7308 FEL w/ Cutter Bar Can anyone tell me what this is worth? 60" HD Bucket for a 7308 FEL w/ Cutter Bar It's in very good shape, only slightly used.

The control levers on my TC33D tend to bind up. If I have the lever pulled back so I'm in 2 wheel drive, I can't slide the lever forward to engage the rear PTO. I really like my tractor, but the control levers are my least favorite part. My question is...is this normal, just poor design? or...

Need an instant portable table to use for raw osyter bar to kick-off the Thanksgiving feast?...See the attachment. My family loves to start off with oysters, beer, and and a few rounds of horseshoes. I never run out of uses for my pallet forks on my Tach-All quick attach system. Happy...

I've had my ATI Tach-All on my 7308 FEL for about a week now. I've got Bradco forks and a quick attach HD bucket. It's a really nice system. I've got no complaints at all. I use the forks more than the bucket now. I was concerned that the forks and Tach-All would weigh so much that I...

My tractor has just under 1 year of factory warranty left on it. It has a dealer installed 7308 FEL. Does anyone know if the loader is covered by the NH warranty? I have a small hyd. leak at the end of one of the cylinders.

I ran over a nail today about 5 minutes after both my local tire repair shops closed until Monday. I was hesitant to try it in fear of making a big-fat expensive-to-cleanup mess, but I loaded the tire up with Slime. I was back to my task in just a few minutes. I'll always keep a bottle on...

I've got a bit of corrosion around the battery area on my TC33D, so to put an end to that problem I spent the money on an Optima battery. Just after installing the battery the tractor would not start. After being mislead by my manual I finally solved the problem. The fuse in the #5 slot...

I did my 150 hour service this weekend on my TC33D. I bought the tractor with 120 hours on it, so this was the first service I have done on the tractor. A few questions came up, and I'm hoping someone can clear this up... The sticker under the hood says to check the "Front Differential Oil...