Search results

does anyone know if I can use the hydraulics on the back of a Kubota 2620 to control a sickle bar mower? The sickle bar only has one connection for lift and it is gravity down. When I don't have the backhoe on the machine I connect the in and out hydraulics together, can I just use one of those...

Does anyone out there run R4 rear tires and turf front tires on a 4x4 tractor? I have a 2620 and would like to switch from R4 front tires to turf, but leave the rear R4's on. Would this cause any issues with the 4x4?

Has anyone out there made a set of manure forks? If so please post pictures...

Has anyone out there built some kind of side mounted mower attachment? I know that doesn't make sense so here is what I would like to do. I have a large pond that i would like to mow around. I can only get so close with tractor or mower, and weed trimmer is a pain in the butt. I would like to...

Doe anyone out there have, have bought, or have made a grapple using pallet forks?

Does anyone know if there is anywhere that sells small buckets for BH65 backhoes? Like a 6 or 9 inch?

What is a good shale/stone size for use on a driveway or road? I have seen 2RC, 2 modified, RC Select Granular Material and 2A Subbase. Does anyone know that differences in these or pro's and con's of them? Thanks..

I have been looking at possibly buying a 3pt generator instead of using my gas powered in cases of lost power, i figure i need the tractor to haul the genny from the barn to the house anyway, why not just get a 3pt. Question one is what RPM does the tractor have to run at to work? Does it...

So can anyone tell me what the HDM stands for in HDM SAE 10W40 oil? And is that the same as standard 10W40 oil?

My Kubota 2620 has been a great machine but i have so many projects this summer and so much dirt to move that i decided it was time to add another vehicle to the fleet.

I have a 2620 that recently has been shutting off when i get off the tractor. This happens when the PTO is NOT running. In the past i just figured that i was bumping the PTO level and usually i would jimmy the shifter around a awhile and it would then start. Yesterday this was not the case. I...

Not sure if this is the proper place to ask this question but i am going to anyway. I am going to have to drill a 1 inch hole through my basement to feed a 3/4 water line to a new building and i am not sure how to seal the hole once the pipe is installed. The 3/4 poly pipe will come out of the...

Can anyone tell me if a Howse brand brush hog is any good? I have never heard of them, but there is a 48inch one for sale close to me, 2 months old like new condition for 800 bucks, just didnt know if that was a good deal or not.

Can anyone tell me if a Howse brand brush hog is any good? I have never heard of them, but there is a 48inch one for sale close to me, 2 months old like new condition for 800 bucks, just didnt know if that was a good deal or not.

I have a few questions about brush hog mowers, or rough cut mowers hopefully someone out there can answer me some questions.... First is a brush hog the same as a rough cut, or rotary mower? I have a kubota 2620 what size could i get? What do i need to cut high fields and bushes and so on...

I have a pond, about 1/2 to 3/4 acre. I would like to install some kind of aerator, but i really don't like the prices of bought aeration systems. Does anyone know if I could build my own using a small air compressor, some hose and maybe some PVC pipe with holes drilled? Has anyone out there...

I have a question that i hope someone can answer. I bought a miller welder from a friend a while back. The manual says i should set the gas to 20+ CFH, but the regulator only reads CFM, and LPH. What is do those letters stand for and where should i set them. If i open the regulator the whole way...

So i picked up a used mig welder from a friend today and was trying to weld some junk metal just for play, anyway i got a lot of popping and crackeling. What are the things that could cause that? Thanks.

So how are the Hobart 230 welders? I am new to welding, I would like to have a welder that i can pretty much do some fabrication, nothing big, but i want to be able to weld metal up to 3/8 inch. I see these at TSC and thought about picking one up. I see there is a 210 as well. I guess what i...

Do they make wheel weights to fit the back wheels of a 2620? I dont really want to fill the tires because i dont want that weight all the time.

So i have a 2620 with the factory LA364 loader and 50in bucket. I would love to have a 60 inch bucket for lighter crap and the 50 inch for heavy stuff. anyone know what options i have? Can i buy a 60" bucket and make brackets? is there a quick detach out there? I am new to this and have no idea...

SO i have a 2620 with the factory LA364 loader and 50in bucket. I would love to have a 60 inch bucket for lighter crap and the 50 inch for heavy stuff. anyone know what options i have? Can i buy a 60" bucket and make brackets? is there a quick detach out there? I am new to this and have no idea...