remote hydrolic

   / remote hydrolic #1  

boxorox

Silver Member
Joined
Feb 10, 2013
Messages
107
Location
jax fl
Tractor
shibaura s1500/kuboto bx2200/
where should I look for a remote hydrolic out put on my shibaura s1500 fourcylinder or where can I tap into to to .
 
   / remote hydrolic #2  
What do you have for hyd now. Pump, 3pt. Anything else?

Do you have a loader, and if so, does the loader valve have a PB port?
 
   / remote hydrolic
  • Thread Starter
#3  
no loader but it has bolt holes in trans for loader the hydrro pump is in front of engine with pipe running to rear. is there a way to split the pipe .
 
   / remote hydrolic #4  
If you have bolts that cover hyd ports, then use the pressure and return ports for loader , remotes or whatever.

To check for pressure, take a 3000 psi hyd gage and adapt it to the bolt holes and check the pressure.

If you have an external pipe, you can cut and install fittings to install a loader valve.

Be sure and get a loader valve with PB.

You could also do the remotes at the same time for T-N-T, etc.
 
 
Top