Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Jul 2013
    Posts
    2
    Location
    Newton NC
    Tractor
    Shibaura 2843T

    Default Shibaura 2843 Three Point Hitch Lift Help

    Owned this tractor for a few years, never any issues. While bush-hogging a few days ago the TPH starting lifting slower, then stopped lifting at all. I can make it lift with no rear attachment, at full throttle only. The FEL works fine, so I think the hydraulic pressure is good. Hydraulic oil is fairly fresh, and level is good. This tractor has the solenoid activators with a manual overide lever, acts the same with using both. I have no manual or drawing to determine the lift cylinder construction.

    ) At this point it seems to be "blow by" in the lift cylinders, sound correct ?

    ) If so, does it have o-rings, seals, or other ?

    ) Where can said parts be found ?


    Any help would be much appreciated.

    Don C

  2. #2
    Veteran Member Kernopelli's Avatar
    Join Date
    Oct 2006
    Posts
    1,724
    Location
    Carterville, Illinois
    Tractor
    Mitsubishi MTE2000D, Dig It 258 Backhoe

    Default Re: Shibaura 2843 Three Point Hitch Lift Help

    I would suggest you unbolt the rockshaft case from the rear of the trans case. After it is persuaded off ( heavy and probably "sealed/stuck" to the case), you will be able to see the lift cylinder and piston. I will bet it uses O-rings and can be replaced with appropriate generic ones.
    Darryl

  3. #3
    New Member
    Join Date
    Jul 2013
    Posts
    2
    Location
    Newton NC
    Tractor
    Shibaura 2843T

    Default Re: Shibaura 2843 Three Point Hitch Lift Help

    Thanks for the reply !

    This one does not seem to have said cover. The housing that seems to house the cylinder bolts on top of the rear differential housing.

    I have new cylinder o-rings ordered, so I will find out when I start tearing it apart.

  4. #4
    New Member
    Join Date
    Aug 2013
    Posts
    3
    Location
    Terrell, Texas
    Tractor
    Shibaura 4030

    Default Re: Shibaura 2843 Three Point Hitch Lift Help

    The cover may be directly under the seat.

Similar Threads

  1. JD 3520 3 point hitch won't lift
    By Bruceva in forum Hydraulics
    Replies: 7
    Last Post: 06-21-2012, 09:06 AM
  2. 3 point hitch log lift
    By hockeypuck in forum Build-It Yourself
    Replies: 14
    Last Post: 12-24-2010, 02:14 PM
  3. Tiller Shibaura SRE2H 3 point hitch?
    By Caddyzigs in forum Attachments
    Replies: 0
    Last Post: 06-11-2010, 02:08 PM
  4. 3-Point Hitch 3 point hitch won't lift
    By sevans in forum New Holland Owning/Operating
    Replies: 93
    Last Post: 09-24-2008, 02:59 PM
  5. 3-Point Hitch Three point hitch won't lift.
    By retiredcoon in forum Chinese Tractors
    Replies: 6
    Last Post: 04-21-2005, 04:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.