MahindraDon
Bronze Member
MahindraDon: If you are still following this thread, I hope there are no hard feelings and my apologizes for comming down on you so hard. That was NOT my intent. But I do have a serious question that maybe you can answer as I cant find the spec anywhere. Specifically, I would like to know the following about the 3616 loader:
1. Lift cylinder bore diameter
2. Lift cylinder stroke length
3. Operating pressure for the system
Thanks[/QUOTE]
Lift Cylinder bore diameter is 2.00"
Lift Cylinder stroke length is 17.80", Extended length is 43.7" and retracted length is 25.9"
Operating pressure is just over 2,000 psi. It is rated at 2,050 to be exact
The tractor system rated flow is 7.7 gpm
1. Lift cylinder bore diameter
2. Lift cylinder stroke length
3. Operating pressure for the system
Thanks[/QUOTE]
Lift Cylinder bore diameter is 2.00"
Lift Cylinder stroke length is 17.80", Extended length is 43.7" and retracted length is 25.9"
Operating pressure is just over 2,000 psi. It is rated at 2,050 to be exact
The tractor system rated flow is 7.7 gpm